Many countries in the Global South have hot and dry climates with large diurnal temperature variations, which leads to large demand for space cooling—which is likely to increase with climate change. A common approach to dampen the indoor temperature fluctuations and thus reduce cooling energy demand is the use of thermal mass. However, the use of lightweight structures in many cities (e.g., high-rise structures, or for earthquake protection) precludes the use of traditional forms of thermal mass. Therefore, phase change materials (PCMs) are being widely developed as thermal energy storage systems for building applications. However, challenges such as leakage of PCMs in liquid state and their low thermal conductivity, still limit their applications in buildings. In this paper, we review the potential of Form or Shape-Stabilized Phase Change Materials (SSPCMs), which are developed by incorporating the PCM into a supporting matrix to prevent leakage in liquid state whilst improving thermal conductivity. We review different methods of preparation and the resultant thermal properties and chemical stability. We find good evidence in the literature for SSPCMs to reduce PCM leakage in liquid state, dampen indoor temperature fluctuations, and potentially alleviate peak energy demand by shifting peak loads to off-peak periods.
This study reports an investigation into both isotropic and anisotropic permeability effects on gas production behavior during depressurization-induced natural gas hydrate dissociation at site NGHP-01-10D in the Krishna-Godavari basin. Numerical simulations were performed on a reservoir-scale model incorporating a single vertical well, examining different scenarios of permeability ratios (rrz). The investigation assessed gas and water production rates, cumulative production volumes, the gas-to-water ratio, and the spatial distribution of reservoir parameters throughout a production duration of 3 years. The findings indicate that permeability anisotropy has a substantial impact on hydrate dissociation and gas recovery. For rrz > 1, horizontal pressure propagation was promoted and gas production increased. For example, at t = 1100 days, the total gas production improved from 7.88 × 105 ST m3 for rrz = 1 to 55.9 × 105 ST m3 for rrz = 10. For rrz < 1, vertical pressure propagation resulted in higher water production with concomitantly lower rates of gas production rates. Spatial distribution analysis revealed that higher rrz values led to more extensive radial propagation of pressure drop, temperature decrease, gas saturation increase, and hydrate dissociation. The study concludes that higher horizontal permeability enhances depressurization effects, resulting in higher gas production rates and more favorable gas-to-water ratios.