We report an easy-to-implement device for surface-enhanced Raman scattering (SERS)-based detection of various analytes dissolved in water droplets at trace concentrations. The device combines an analyte-enrichment system and SERS-active sensor site, both produced via inexpensive and high-performance direct femtosecond (fs)-laser printing. Fabricated on a surface of water-repellent polytetrafluoroethylene substrate as an arrangement of micropillars, the analyte-enrichment system supports evaporating water droplet in the Cassie–Baxter superhydrophobic state, thus ensuring delivery of the dissolved analyte molecules towards the hydrophilic SERS-active site. The efficient pre-concentration of the analyte onto the sensor site based on densely arranged spiky plasmonic nanotextures results in its subsequent label-free identification by means of SERS spectroscopy. Using the proposed device, we demonstrate reliable SERS-based fingerprinting of various analytes, including common organic dyes and medical drugs at ppb concentrations. The proposed device is believed to find applications in various areas, including label-free environmental monitoring, medical diagnostics, and forensics.

Ultrashort laser pulses deliver electromagnetic energy to matter causing its localized heating that can be used for both material removal via ablation/evaporation and driving interface chemical reactions. Here, it is shown that both mentioned processes can be simultaneously combined within straightforward laser nanotexturing of Si wafer in a functionalizing solution to produce a practically relevant metal–semiconductor surface nano‐morphology. Such unique hybrid morphology represents deep‐subwavelength Si laser‐induced periodic surface structures (LIPSSs) with an extremely short period down to 70 nm and high‐aspect‐ratio nano‐trenches loaded with controllable amount of plasmonic nanoparticles formed via laser‐induced decomposition of the precursor noble‐metal salts. Moreover, heat localization driving reduction process is utilized to produce surface morphology locally decorated with dissimilar plasmon‐active nanoparticles. Light‐absorbing deep‐subwavelength Si LIPSSs loaded with controllable amount of noble‐metal nanoparticles represent an attractive architecture for plasmon‐related applications such as optical nanosensing where efficient coupling of the propagating optical waves to highly localized electromagnetic “hot spots” is a mandatory requirement. To support this statement, applicability of such hybrid morphology for fluorescence‐based detection of nanomolar concentrations of mercury cations in solution is demonstrated.

Here, we present the single-step laser-assisted fabrication of anti-reflective hierarchical surface textures on silicon locally functionalized with a photoluminescent (PL) molecular nanolayer. Using femtosecond-laser ablation of commercial crystalline Si wafers placed under a layer of a solution containing rhodamine 6G (R6G) a triethoxysilyl derivative, we fabricated ordered arrays of microconical protrusions with self-organized nanoscale surface morphology. At the same time, the laser-induced temperature increase facilitated surface activation and local binding of the R6G derivative to the as-fabricated nanotextured surface. The produced dual-scale surface textures showed remarkable broadband (visible to near-IR) light-absorbing properties with an averaged reflectivity of around 1%, and the capping molecular nanolayer demonstrated a strongly enhanced PL yield. By performing a pH sensing test using the produced nanotextured substrate, we confirmed the retention of sensory properties of the molecules attached to the surface and validated the potential applicability of the high-performing liquid-assisted laser processing as a key technology for the development of innovative multifunctional sensing devices in which the textured substrate (e.g., ultra-black semiconductor) plays a dual role as a support and PL signal amplifier.