The Moon is the closest natural satellite to mankind, with valuable resources on it, and is an important base station for mankind to enter deep space. How to establish a reasonable lunar Global Navigation Satellite System (GNSS) to provide real-time positioning, navigation, and timing (PNT) services for Moon exploration and development has become a hot topic for many international scholars. Based on the special spatial configuration characteristics of Libration point orbits (LPOs), the coverage capability of Halo orbits and Distant Retrograde Orbit (DRO) in LPOs is discussed and analyzed in detail. It is concluded that the Halo orbit with a period of 8 days has a better coverage effect on the lunar polar regions and the DRO has a more stable coverage effect on the lunar equatorial regions, and the multi-orbital lunar GNSS constellation with the optimized combination of DRO and Halo orbits is proposed by combining the advantages of both. This multi-orbital constellation can make up for the fact that a single type of orbit requires a larger number of satellites to fully cover the Moon, using a smaller number of satellites for the purpose of providing PNT services to the entire lunar surface. We designed simulation experiments to test whether the multi-orbital constellations meet the full lunar surface positioning requirements, and compare the coverage, positioning, and occultation effects of the four constellation designs that pass the test, and finally obtain a set of well-performing lunar GNSS constellations. The results indicate that the multi-orbital lunar GNSS constellation combining DRO and Halo orbits can cover 100% of the Moon surface, provides there are more than 4 visible satellites at any time on the Moon surface, which meets the navigation and positioning requirements, and the Position Dilution of Precision (PDOP) value is stable within 2.0, which can meet the demand for higher precision Moon surface navigation and positioning.
Efficient use of global navigation satellite system (GNSS) observations improves when applying rational satellite selection algorithms. By combining the Sherman–Morrison formula and singular value decomposition, a smaller-GDOP (geometric dilution of precision)-value method is proven for an increasing number of visible satellites. By combining this smaller-GDOP-value method with the maximum-volume-tetrahedron method, a new rapid satellite selection algorithm based on the Sherman–Morrison formula for GNSS multi-systems is proposed. The basic idea of the algorithm is as follows: First, the maximum-volume-tetrahedron method is used to obtain four initial visible satellites. Then, the other visible satellites are selected by using the smaller-GDOP-value method to reduce the GDOP value and improve the accuracy of the overall algorithm. When the number of included satellites reaches a certain value, the rate of GDOP decrease tends to approach zero. Considering the algorithm precision and the computation efficiency, reasonable thresholds and end of calculation condition equation are given, which can make the proposed algorithm autonomous. The reasonable thresholds and the end of calculation parameters are suggested by means of experiments. Under the thresholds and the end of calculation parameters, the algorithm has an adaptive functionality. Furthermore, the GDOP values of the algorithm are less than 2, indicating that this algorithm can meet one of the requirements of high-precision navigation. Moreover, compared with the computation complexity values of the optimal GDOP estimation method, which includes all visible satellites, the values of the new algorithm are about half, indicating that this algorithm has a rapid performance. These findings verify that the proposed satellite selection algorithm based on the Sherman–Morrison formula provides autonomous functionality, high-performance computing, and high-accuracy results.
24 July 2023 in International Journal of Aerospace Engineering
Cycle slip determination plays an important role in high-precision data processing and application of global navigation satellite systems (GNSS). The TurboEdit method consists of the Melbourne-Wubbena (MW) and the geometry-free phase (GF) combination. It can correctly detect and repair cycle slip in most cases. Cycle slip detection (CSD) with GF is disturbed by severe ionospheric delay variations; moreover, CSD or cycle slip repair (CSR) with the MW faces the risk of the disturbance from large pseudorange errors. Hence, cycle slip determination would be difficult under some extreme conditions, e.g., cycle slips occur in low altitude satellite, low sampling rate of dual-frequency observations. To overcome the limitations, a new dual-frequency CSD and CSR method is proposed. The main contents are as follows: (1) compared with the MW method, the Doppler-assisted phase subtraction pseudorange (DAPSP) method that we proposed has no detection blind spot and can effectively reduce the influence of pseudorange noise at high sampling rates; thus, we replace MW by the DAPSP method to improve the detection accuracy. (2) An adaptive threshold model with root mean square (RMS) is established to effectively reduce the missing and false range detection of cycle slip. (3) The sliding polynomial fitting-assisted GF (SPFAGF) is carried out according to the satellite altitude angle. The trend of ionospheric delay and residual multipath effect error between adjacent epochs is extracted and suppressed by SPFAGF. The method combined with DAPSP and SPFAGF (DAPSP-SPFAGF) overcomes the situation that the TurboEdit method cannot effectively detect under extreme conditions. The experimental results of Beidou dual-frequency observation data show that the TurboEdit method and the DAPSP-SPFAGF method can perform CSD and CSR in most cases. At the sampling rate of 1 s, the detection speed of DAPSP-SPFAGF method is significantly faster than TurboEdit method. The number of false positives about CSD is reduced from 68 to 0. At the sampling rate of 30 s and under the condition of the observed satellite altitude angle below 30°, the false alarm rate of the DAPSP-SPFAGF method is 0, but the TurboEdit method’s false alarm rate is 71.2%. So DAPSP-SPFAGF method is prior to the TurboEdit method at the high sampling rates or under extreme conditions, especially it can accurately detect and repair cycle slip and reduce the false positives and false alarm rate.
Flood events have caused huge disasters with regard to human life and economic development, especially short-term flood events that have occurred in recent years. Gravity Recovery and Climate Experiment (GRACE) satellites can directly detect the spatiotemporal characteristics of terrestrial water storage anomalies (TWSA), which play an important role in capturing flood signals. However, the monthly resolution of GRACE-derived TWSA limits its application in monitoring sub-monthly flood events. Therefore, this paper first reconstructs the daily TWSA based on a statistical model with near real-time precipitation and temperature as input variables, and then three daily flood monitoring indexes are developed based on the reconstructed TWSA. Furthermore, these indexes are employed to evaluate the temporal and spatial characteristics of the 2016 short-term flood event in the Haihe River basin (HRB), including the flood potential index (FPI), water storage deficit index (WSDI), and combined climate deviation index (CCDI). In contrast to previous studies, the temporal resolution of TWSA-based indexes is improved from the monthly scale to the daily scale, which largely improves the temporal characterization of flood monitoring. Results demonstrate that (1) among ten kinds of “Temperature-Precipitation” combinations, the reconstructed TWSA based on CN05.1-CN05.1 match well with the GRACE TWSA, as well as publicly available daily TWSA datasets with a Nash-Sutcliffe efficiency coefficient (NSE) of 0.96 and 0.52 ~ 0.81 respectively. (2) The short-term flood characteristics can be better characterized by the reconstructed daily TWSA based on CN05.1-CN05.1, reaching the peak of 216.19 mm on July 20 in the flood center. Additionally, the spatial characteristics of the equivalent water height (EWH) are detected to evolve from southwest to northeast during the short-term flood. (3) FPI, WSDI, and CCDI are proven to be effective in monitoring flood events in the HRB, which validates the reliability of the reconstructed daily TWSA. Moreover, compared to the 56% and 66% coverage of damage quantified by FPI and CCDI, the 45% damage coverage of the flood mapped by WSDI is more consistent with the governmental reports within the HRB. This paper is expected to provide a valuable reference for the assessment of short-term events caused by extreme climate change.
In the preprocessing of high-precision navigation and positioning data, the most widely used MW combination cycle slip detection method is greatly affected by pseudorange noise. It has issues such as missing small cycle slips and failing to promptly reset the recursive averaging process after cycle slip detection failure, which leads to subsequent threshold divergence. This paper proposes an improved MW combination cycle slip detection method based on Complete Ensemble Empirical Mode Decomposition (CEEMDAN), permutation entropy, and wavelet denoising, which uses CEEMDAN to decompose the cycle slip signal into a series of intrinsic modal functions (IMFs) and then selects the IMFs that require denoising through the permutation entropy algorithm, and the wavelet denoising technique is combined to eliminate the residual noise further, so that the noise can be removed more accurately. Experimental results show that compared with the original MW algorithm, the proposed improved method can effectively reduce the influence of pseudo-range noise, and reduce the false detection rate of cycle slip from 1.6% and 6–0%. All small period slips can be successfully detected in complex noise environments, avoiding the missed detection of the original MW algorithm and the related threshold divergence problems.
Amidst the backdrop of the profound synergy between navigation and visual perception, there is an urgent demand for accurate real-time vehicle positioning in urban environments. However, the existing global navigation satellite system (GNSS) algorithms based on Kalman filters fall short of precision. In response, we introduce an elastic filtering algorithm with visual perception for vehicle GNSS navigation and positioning. Firstly, the visual perception system captures real-time environmental data around the vehicle. It utilizes the interframe differential optical flow method and vehicle state switching characteristics to assess the current driving status. Secondly, we design an elastic filtering model specifically for various vehicle states. This model enhances the precision of Kalman filter-based GNSS navigation. In urban driving, vehicles often experience frequent stationary parking. To address this, we incorporate a zero-speed constraint to further refine vehicle location data when the vehicle is stationary. This constraint matches the data with the appropriate elastic filtering model. Ultimately, we conduct simulation and real-world vehicle navigation experiments to confirm the validity and rationality of our proposed algorithm. Compared with the conventional algorithm and the existing interactive multi-model algorithm, the proposed algorithm significantly improves the navigation and positioning accuracy of vehicle GNSS in urban environments. Compared to the commonly used constant acceleration (CA) and Constant Velocity (CV) models, there has been a significant improvement in positioning accuracy. Furthermore, when benchmarked against the more advanced interactive multi-model (IMM) model, the method proposed in this paper has enhanced the positioning accuracy enhancements in three dimensions: 21.8%, 20.9%, and 31.3%, respectively.