Zhifeng Liu

Zhifeng Liu


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 June 2018 in Journal of Dynamic Systems, Measurement, and Control
Verified
Journal Article
Closed access
PDF file
HHHaihong Huang
Haihong Huang
RJRui Jin
Rui Jin
LLLei Li
Lei Li
ZLZhifeng Liu
Zhifeng Liu
Hydraulic presses are widely applied in various forming processes to manufacture products with complex shapes, however, they are energy-intensive. In order to lower the energy consumption, a variable-speed variable-displacement pump unit (SVVDP) was developed for hydraulic presses, where the flow rate required by the press in a forming process can be realized by changing the motor rotating speed and the pump displacement simultaneously. A theoretical model was built to reveal the energy dissipation behavior of the drive unit, which shows that the energy efficiency of the drive unit can be optimized by varying the rotating speed of the motor under a variety of load conditions. An experimental platform with a SVVDP was established to find the optimum rotating speed and the corresponding displacement in different load conditions, and experimental results verified the improved energy efficiency of the SVVDP compared with that of the commonly used single variable drive unit. By employing the strategy that the determined optimum rotating speeds in different load conditions were preset as recommended values for the drive unit working in different operations, the proposed drive unit was applied to a press completing a forming process and the results indicate significant energy saving potentials.

27 June 2016 in Journal of Dynamic Systems, Measurement, and Control
Verified
Journal Article
Closed access
PDF file
MGMengdi Gao
Mengdi Gao
HHHaihong Huang
Haihong Huang
XLXinyu Li
Xinyu Li
ZLZhifeng Liu
Zhifeng Liu
The energy efficiency of the piston pumps is one of the considerable important factors in design and analysis of hydraulic system, especially in the process of real-time tracking of energy dissipation in a variety of loading conditions. The existing methods for obtaining the energy efficiency curve of piston pumps are either time-consuming or inaccurate. In order to quantify the energy efficiency of the piston pumps quickly and accurately, the leakage and friction energy loss caused by the clearances in the sliding pairs are analyzed, and an overall efficiency model was established, which contains two constants to be determined by two test points. The accuracy of the model was verified based on a test rig for a hydraulic pump, and it can be improved by selecting appropriate test points via the method of deviation analysis. The results show that the proposed efficiency models are in good agreement with the experimental results, and the best test points are in the range of 0–25% and 51–75% of the peak pressure of the investigated piston pump.

17 July 2019 in Journal of Manufacturing Science and Engineering
Verified
Journal Article
Closed access
PDF file
LLLei Li
Lei Li
HHHaihong Huang
Haihong Huang
Fu  ZhaoFu Zhao
Fu Zhao
XZXiang Zou
Xiang Zou
QLQi Lu
Qi Lu
John SutherlandJohn Sutherland
John Sutherland
Studies have indicated that reducing the process energy demand is as important as improving the energy conversion efficiency to make manufacturing equipment more energy efficient. However, little work has been done to understand the energy demand characteristics of the widely employed drawing process. In this paper, the energy demand of the cylindrical drawing process under a range of operating parameters was measured and analyzed. Since any energy saving efforts should not have negative effects on the product quality, the forming quality of the drawn part indicated by the maximum thinning and thickening ratios and variation of thickness was also considered. To identify the main contributors to energy demand and forming quality, two sets of experiments were designed based on the Taguchi method. The first set of experiments include three parameters (i.e., punch velocity, blank holder force, and drawn depth) at three levels, while the second set of experiments only include two factors (i.e., punch velocity and blank holder force) at three levels due to their impacts on the forming quality. Analysis of variance (ANOVA) and analysis of means (ANOM) were then used to analyze the experimental results. Finally, grey relational analysis (GRA) was used to reveal the correlation between the forming quality and the process energy. Results show that the mean thickness variation has the strongest relational grading with the process energy, which suggests that the process energy can be used as an effective indicator to predict mean thickness variation of the drawn part. The identified characteristics of the process energy and the forming quality can be used to select process parameters for reduced energy demands of drawing processes.

24 December 2018 in Journal of Manufacturing Science and Engineering
Verified
Journal Article
Closed access
PDF file
LLLei Li
Lei Li
HHHaihong Huang
Haihong Huang
Fu  ZhaoFu Zhao
Fu Zhao
XZXiang Zou
Xiang Zou
GMGamini P. Mendis
Gamini P. Mendis
John SutherlandJohn Sutherland
John Sutherland
As energy efficiency increases in importance, researchers have identified manufacturing processes as opportunities where energy consumption can be reduced. Drawing is one widely employed, energy intensive manufacturing process, which could benefit by analysis of energy consumption during operation. To optimize the energy consumption of the drawing process, this paper developed an explicit model to quantify the process energy for the cylindrical drawing process by analyzing the dynamic punch force during the process. In this analysis, the evolution of the stress and strain was analyzed in the drawn part by considering all the structure parameters of the drawn part. The stress and strain analyses were integrated into an overall process energy model, and the behavior of the model was classified into three categories, based on their physical mechanisms, i.e., deformation energy, bending energy, and friction energy. The model was validated using numerical experiments designed by the Taguchi method where two different kinds of materials were tested over 18 runs. The results from the numerical experiments were compared with those from the model, and show that the maximum variation of the process energy predicted by this model is less than 10% for a given part. Sensitivity analysis was performed on the model to understand the contributions of the process parameters on the process energy to guide process optimization for lower energy consumption. The established model can assist in the rapid design of drawn parts with lower embodied energy.

3 June 2016 in Energies
Verified
Journal Article
Open access
PDF file
MGMengdi Gao
Mengdi Gao
HHHaihong Huang
Haihong Huang
ZLZhifeng Liu
Zhifeng Liu
XLXinyu Li
Xinyu Li
John SutherlandJohn Sutherland
John Sutherland
The clearances in the slide guide system of a hydraulic press are one of the significant factors affecting its accuracy. These clearances also affect the energy consumption of the press. An energy loss model that considers the oil leaks and friction associated with these clearances was proposed, and the size of clearances was optimized based on the model. The maximum allowable eccentric load and the energy loss on the wedge clearance condition were calculated to ensure the slide and guide pillars function properly. The stiffness of pillars and wear of guide rails were checked under an eccentric load condition. A case for rapid sheet metal forming with a 20 MN hydraulic press was examined. For this case, the optimum fit clearances were found to be approximately 0.4 mm. The energy loss under an eccentric load condition was increased by approximately 83% compared to a non-eccentric load condition. The pillars were optimized by reducing excessive stiffness, which served to decrease the pillar weight by nearly 20%.

20 August 2019 in International Journal of Chemical Reactor Engineering
Verified
Journal Article
Closed access
PDF file
HCHuanbo Cheng
Huanbo Cheng
WLWeihao Liu
Weihao Liu
HHHaihong Huang
Haihong Huang
ZLZhifeng Liu
Zhifeng Liu
Supercritical fluids with excellent decomposition and mass transfer capabilities can degrade the resin matrix of carbon fiber reinforced polymer (CFRPs) to recycle high-performance carbon fibers. The degradation rate of CFRPs was influenced by the velocity and temperature distributions of supercritical fluids in the reactor with mechanical stirring. The flow field model in the reactor was established during the degradation of CFRPs by supercritical ethanol. The velocity and temperature distributions in both the axial and radial directions were simulated when the stirrer was installed in the reactor at different heights. The simulation indicated that the flow distribution was uneven in the reactor and the position with optimum flow distribution for placing CFRPs was 45 %–70 % of the installation distance between underside of the impeller and the base of the reactor. The experiment shows mechanical stirring can significantly promote CFRPs degradation. When the installing height of the stirrer is 110 mm, the degradation rate of the epoxy resin is 10 % higher than that without stirring. The degradation rate of epoxy resin was also affected by the placement position of CFRPs in the reactor, and could be improved by approximately 14 % higher than that without mechanical stirring when the CFRPs were placed in the position with optimum flow distribution.