Magnetic properties and exchange couplings of nanocomposite magnets prepared by mechanical milling have been investigated at low temperatures. With decreasing temperature, due to Y substitution for Nd, an extension of the exchange coupling length in nanocomposite magnets occurs in a wider temperature range. This can be attributed a decreasing anisotropy of the hard-magnetic phase so that more soft-magnetic grains participate the exchange coupling. Close to 135 K, due to the spin reorientation, the hard magnetic phase is not more uniaxail, which leads to a drastic decrease of the magnetic properties of the -based nanocomposite magnets.
20 August 2019 in International Journal of Chemical Reactor Engineering
Supercritical fluids with excellent decomposition and mass transfer capabilities can degrade the resin matrix of carbon fiber reinforced polymer (CFRPs) to recycle high-performance carbon fibers. The degradation rate of CFRPs was influenced by the velocity and temperature distributions of supercritical fluids in the reactor with mechanical stirring. The flow field model in the reactor was established during the degradation of CFRPs by supercritical ethanol. The velocity and temperature distributions in both the axial and radial directions were simulated when the stirrer was installed in the reactor at different heights. The simulation indicated that the flow distribution was uneven in the reactor and the position with optimum flow distribution for placing CFRPs was 45 %–70 % of the installation distance between underside of the impeller and the base of the reactor. The experiment shows mechanical stirring can significantly promote CFRPs degradation. When the installing height of the stirrer is 110 mm, the degradation rate of the epoxy resin is 10 % higher than that without stirring. The degradation rate of epoxy resin was also affected by the placement position of CFRPs in the reactor, and could be improved by approximately 14 % higher than that without mechanical stirring when the CFRPs were placed in the position with optimum flow distribution.