María I. Rodríguez-López

Dr. María I. Rodríguez-López

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 June 2019 in Polymers
Verified
Journal Article
Open access
PDF file
AMAinoa Murcia-Salvador
Ainoa Murcia-Salvador
JPJosé A. Pellicer
José A. Pellicer
MFMaría I. Fortea
María I. Fortea
Vicente M Gómez-LópezVicente M Gómez-López
Vicente M Gómez-López
MRMaría I. Rodríguez-López
María I. Rodríguez-López
José Antonio GabaldónJosé Antonio Gabaldón
José Antonio Gabaldón
The dyeing industry is one of the most polluting in the world. The adsorption of dyes by polymeric matrixes can be used to minimize the discharge of dyes into the environment. In the present study, chitosan-NaOH and β-cyclodextrin-epichlorohydrin polymers were used to remove the dye Direct Blue 78 from a wastewater model. To understand the adsorption behavior of Direct Blue 78 onto the polymers, adsorption rate and maximum adsorption capacity were calculated using kinetic tests and isotherm curves respectively. The kinetic data and mechanism of the adsorption process were analyzed by three models and the equilibrium data by three adsorption isotherms; also the different thermodynamic parameters were calculated. Results showed that the adsorption process follows pseudo-second-order kinetics in both polymers and the Langmuir isotherm best-fitted data for chitosan-NaOH polymer and the Freundlich isotherm for the β-CDs-EPI polymer. The adsorption process is exothermic in both cases and spontaneous for the β-CDs-EPI polymer to a certain temperature and not spontaneous for the chitosan-NaOH polymer and β-CDs-EPI polymer at higher temperatures. The complementary action of an advanced oxidation process eliminated >99% of the dye from water. The coupled process seems to be suitable for reducing the environmental impact of the dyeing industry.

18 December 2021 in Foods
Verified
Journal Article
Open access
PDF file
Vicente M Gómez-LópezVicente M Gómez-López
Vicente M Gómez-López
EJEric Jubinville
Eric Jubinville
MRMaría I. Rodríguez-López
María I. Rodríguez-López
MTMathilde Trudel-Ferland
Mathilde Trudel-Ferland
SBSimon Bouchard
Simon Bouchard
JJJulie Jean
Julie Jean
Viruses on some foods can be inactivated by exposure to ultraviolet (UV) light. This green technology has little impact on product quality and, thus, could be used to increase food safety. While its bactericidal effect has been studied extensively, little is known about the viricidal effect of UV on foods. The mechanism of viral inactivation by UV results mainly from an alteration of the genetic material (DNA or RNA) within the viral capsid and, to a lesser extent, by modifying major and minor viral proteins of the capsid. In this review, we examine the potential of UV treatment as a means of inactivating viruses on food processing surfaces and different foods. The most common foodborne viruses and their laboratory surrogates; further explanation on the inactivation mechanism and its efficacy in water, liquid foods, meat products, fruits, and vegetables; and the prospects for the commercial application of this technology are discussed. Lastly, we describe UV’s limitations and legislation surrounding its use. Based on our review of the literature, viral inactivation in water seems to be particularly effective. While consistent inactivation through turbid liquid food or the entire surface of irregular food matrices is more challenging, some treatments on different food matrices seem promising.

2 February 2019 in Polymers
Verified
Journal Article
Open access
PDF file
JPJosé A. Pellicer
José A. Pellicer
MRMaría I. Rodríguez-López
María I. Rodríguez-López
MFMaría I. Fortea
María I. Fortea
CLCarmen Lucas
Carmen Lucas
MRMaría Teresa Mercader Ros
María Teresa Mercader Ros
José Antonio GabaldónJosé Antonio Gabaldón
José Antonio Gabaldón
β-cyclodextrin (β-CD) and hydroxypropyl-β-cyclodextrin (HP-β-CD) were used to prepare insoluble polymers using epichlorohydrin as a cross-linking agent and the azo dye Direct Red 83:1 was used as target adsorbate. The preliminary study related to adsorbent dosage, pH, agitation or dye concentration allowed us to select the best conditions to carry out the rest of experiments. The kinetics was evaluated by Elovich, pseudo first order, pseudo second order, and intra-particle diffusion models. The results indicated that the pseudo second order model presented the best fit to the experimental data, indicating that chemisorption is controlling the process. The results were also evaluated by Freundlich, Langmuir and Temkin isotherms. According to the determination coefficient (R2), Freunlich gave the best results, which indicates that the adsorption process is happening on heterogeneous surfaces. One interesting parameter obtained from Langmuir isotherm is qmax (maximum adsorption capacity). This value was six times higher when a β-CDs-EPI polymer was employed. The cross-linked polymers were fully characterized by nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA). Also, morphology and particle size distribution were both assessed. Under optimized conditions, the β-CDs-EPI polymer seems to be a useful device for removing Direct Red 83:1 (close 90%), from aqueous solutions and industrial effluents. Complementarily, non-adsorbed dye was photolyzed by a pulsed light driven advanced oxidation process. The proposed methodology is environmental and economically advantageous, considering the point of view of a sustainable recycling economy in the textile dyeing process.

11 March 2020 in Materials
Verified
Journal Article
Open access
PDF file
AMAinoa Murcia-Salvador
Ainoa Murcia-Salvador
JPJosé A. Pellicer
José A. Pellicer
MRMaría I. Rodríguez-López
María I. Rodríguez-López
Vicente M Gómez-LópezVicente M Gómez-López
Vicente M Gómez-López
Estrella Nuñez DelicadoEstrella Nuñez Delicado
Estrella Nuñez Delicado
José Antonio GabaldónJosé Antonio Gabaldón
José Antonio Gabaldón
Eggshell, a waste material from food manufacturing, can be used as a potential ecofriendly adsorbent for the elimination of textile dyes from water solutions. The adsorption process was evaluated varying factors such as initial dye load, contact time, pH, quantity of adsorbent, and temperature. The initial dye load (Direct Blue 78) was in the range of 25–300 mg/L. The kinetics of adsorption were analyzed using different models, such as pseudo-first-order, pseudo-second-order, and intraparticle diffusion model. Also, the experimental data at equilibrium were studied using Freundlich, Langmuir, and Temkin isotherms. The kinetics followed pseudo-second-order, then pseudo-first-order, and finally the model of intraparticle diffusion. The results obtained for data at equilibrium follow the order: Freundlich > Langmuir > Temkin. The adsorption equilibrium showed a maximum capacity of adsorption (qmax) of 13 mg/g at pH 5, and using 0.5 g of eggshell. Dye adsorption was enhanced with increasing temperatures. The thermodynamic study revealed the spontaneity and endothermic nature of the adsorption process. The desorption study shows that the eggshell could be reused in different adsorption/desorption cycles. A novel advanced oxidation process could degrade more than 95% of the dye. The results show that eggshell is a waste material useful to remove hazardous dyes from wastewater, which may alleviate the environmental impact of dyeing industries.

1 November 2020 in Molecules
Verified
Journal Article
Open access
PDF file
MRMaría I. Rodríguez-López
María I. Rodríguez-López
MRMaría Teresa Mercader Ros
María Teresa Mercader Ros
CLCarmen Lucas
Carmen Lucas
Vicente M Gómez-LópezVicente M Gómez-López
Vicente M Gómez-López
APAlfonso Pérez-Garrido
Alfonso Pérez-Garrido
Estrella Nuñez DelicadoEstrella Nuñez Delicado
Estrella Nuñez Delicado
The objective of the present study is to obtain linalool- cyclodextrin (CDs) solid complexes for possible applications in the food industry. For this purpose, a detailed study of linalool complexation was carried out at different pH values, to optimize the type of CDs and reaction medium that support the highest quantity of encapsulated linalool. Once demonstrated the ability of hydroxypropyl-β-cyclodextrin (HP-β-CDs), to form inclusion complexes with linalool (KC = 921 ± 21 L mol−1) and given their greater complexation efficacy (6.788) at neutral pH, HP-β-CDs were selected to produce solid inclusion complexes by using two different energy sources, ultrasounds and microwave irradiation, subsequently spraying the solutions obtained in the Spray Dryer. To provide scientific solidity to the experimental results, the complexes obtained were characterized by using different instrumental techniques in order to confirm the inclusion of linalool in the HP-β-CDs hydrophobic cavity. The linalool solid complexes obtained were characterized by using 1H nuclear magnetic resonance (1H-NMR) and 2D nuclear magnetic resonance (ROSEY), differential scanning calorimetry, thermogravimetry and Fourier transform infrared spectrometry. Moreover, the structure of the complex obtained were also characterized by molecular modeling.

22 September 2020 in Molecules
Verified
Journal Article
Open access
PDF file
Vicente Serna-EscolanoVicente Serna-Escolano
Vicente Serna-Escolano
María SerranoMaría Serrano
María Serrano
Daniel ValeroDaniel Valero
Daniel Valero
MRMaría I. Rodríguez-López
María I. Rodríguez-López
José Antonio GabaldónJosé Antonio Gabaldón
José Antonio Gabaldón
DOMINGO MARTINEZ-ROMERODOMINGO MARTINEZ-ROMERO
DOMINGO MARTINEZ-ROMERO
Consumers demand the use of eco-friendly fungicides to treat fruit and vegetables and governmental authorities have unauthorized the application of chemical antifungals for the efficient control of sour rot. In the present research, the microwave irradiation (MW) method was used to encapsulate thymol into 2-hydroxylpropyl-beta-cyclodextrin (HP-β-CD) and the effect of these HP-β-CD on controlling sour rot in citrus fruit, caused by Geotrichum citri-aurantii, was evaluated. Amounts of 25 and 50 mM of HP-β-CD-thymol were used, and compared with propiconazole, to control the decay of inoculated lemon fruit. The treatments were performed in curative and preventive experiments. The incidence and severity of Geotrichum citri-aurantii in 25 and 50 mM HP-β-CD-thymol-treated fruit were reduced in both experiments. The preventive 50 mM HP-β-CD-thymol treatment showed the best effect, reducing the sour rot, respiration rate and fruit weight loss during storage at 20 °C. HP-β-CD-thymol increased polyphenol concentration and the activity of antioxidant enzymes, such as catalase (CAT), ascorbate peroxidase (APX) and peroxidase (POD) in lemon peel, and the highest effects were found with the 50-mM dose. In conclusion, the results show that the use of thymol encapsulated by MW into HP-β-CD could be an effective and sustainable tool, a substitute to the synthetic fungicides, for G. citri-auriantii control in citrus fruit.