The purpose of this study was to evaluate the individual contributions of inhalation and dermal exposures to urinary glyphosate levels following the heavy residential consumer application of a glyp...
Consumers are confronted with conflicting information regarding the safety of specific foods. For example, the Environmental Working Group (EWG) publishes an annual consumer guide in which they rank the pesticide contamination of 46 popular fruits and vegetables, which includes designating the 12 with the greatest pesticide contamination as the "Dirty Dozen," to help consumers reduce exposures to toxic pesticides. However, consumer guides like EWG's only incorporate some hazard assessment principles and do not reflect a dietary risk assessment. Therefore, the purpose of this study is to apply risk assessment techniques to EWG's Dirty Dozen list using a uniform screening-level approach to estimate pesticide exposures for U.S. consumers and to characterize the associated chronic human health risks. The most commonly detected pesticide and its representative residue concentrations were identified for each produce type on the 2022 Dirty Dozen list using the USDA Pesticide Data Program database. Estimates of mean dietary consumption in the U.S. were used to calculate dietary exposure to each pesticide-produce combination for adults and children. Pesticide-specific U.S. EPA dietary health-based guidance values (HBGVs) were then used as benchmarks to evaluate the chronic human health risk of consuming each produce type. Overall, the estimated daily exposure for each pesticide-produce combination was below the corresponding HBGV for all exposure scenarios. The current analysis demonstrates that excessive produce-specific pesticide exposure is unexpected as the amount of produce that would need to be consumed on a chronic basis, even among children, far exceeds typical dietary intake. Future research is necessary to assess acute dietary exposure scenarios and to consider cumulative risk.
1 September 2020 in Toxicology and Industrial Health
Various decontamination methods that may be used to extend respirator inventories have been examined for over a decade. In light of the ongoing coronavirus disease 2019 pandemic, many health-care settings are now implementing these techniques amid respirator shortages. We sought to perform a critical review of the available literature regarding decontamination methods to determine which strategies are effective at inactivating the target organism, preserve performance (filter efficiency and fit) of the respirator, leave no residual toxicity from the treatment, and are fast-acting, inexpensive, and readily available. We also identified areas for future research. We found that ultraviolet germicidal irradiation (UVGI) is the most widely studied method, and treatments are effective at inactivating SARS-CoV-2 without diminishing filtration efficiency or fit. These treatments were found to leave no residual toxicity for the wearer, have a relatively short cycle time of less than 1 h, and existing systems can likely be retrofitted to accommodate this method. Further, UVGI (among other treatment methods) has been recommended by the Centers for Disease Control and Prevention (CDC), Occupational Safety and Health Administration (OSHA), and respirator manufacturers. Methods involving microwave-generated steam also show potential in that they are likely effective against SARS-CoV-2, preserve performance, have no residual toxicity, require a short duration treatment cycle (often less than 10 min), and microwave ovens are inexpensive and readily available. Steam methods are currently recommended by the CDC, OSHA, and manufacturers. These respirator decontamination methods are likely also useful against other viruses or pathogens.
23 July 2024 in Journal of Occupational and Environmental Hygiene
Airborne respirable crystalline silica (RCS) has been a widely recognized hazard in the United States for nearly 100 years, yet it continues to pose a risk to construction tradespersons, among others. RCS exposures vary widely depending on site conditions and tools and materials used. The proper use of engineering, administrative, and personal protective equipment (PPE) controls can effectively reduce exposure to RCS. Historically, others have reviewed available RCS exposure data among construction trades and reported that there were considerable data gaps and variability that needed to be addressed. This current assessment aimed to synthesize available peer-reviewed exposure studies to determine potential RCS exposures during the use of common construction materials and evaluate to what extent data gaps and variability persist. Twenty-eight studies were identified that reported RCS exposure during construction tasks. After conversion to the unit of µg/m3, reported measurements from samples collected for varying durations ranged from 6.0 to 75,500 µg/m3 for work with concrete, 80 to 4,240 µg/m3 for work with brick, <59 to 10,900 µg/m3 for work with mortar, 90 to 44,370 µg/m3 for work with engineered stone, and 70 to 380 µg/m3 for work with roof tile. To better facilitate pooling data across studies, future researchers should report their sample duration, clarify how time-weighted average (TWA) exposure data are calculated, report the silica content of the material being manipulated, and specify whether samples were collected while the task was performed in isolation or on a worksite where other silica-containing materials were also actively handled. When reporting results as respirable quartz, it is important to note whether any other polymorphic forms of silica were detected. It is ultimately the employer's responsibility to train employees and monitor and control RCS exposures on construction worksites. To do this effectively, it is important to have a clear understanding of the tasks, materials, and site conditions where intervention is most urgently needed.
1 July 2022 in The Journal of the Acoustical Society of America
Exposure to noise occurs throughout daily life and, depending on the intensity, duration, and context, can lead to hearing loss, disturbed sleep, decreased academic achievement, and other negative health outcomes. Recently, smartwatches that use the device's onboard microphone to measure noise levels were released. This study evaluated the accuracy of these smartwatches in a controlled laboratory setting. For broadband pink noise, a total of 11 441 measurements were collected. The results showed that, on average, the smartwatch reported 3.4 dBA lower than the reference system on average. For the octave-band, a total of 18 449 measurements were collected. The smartwatch measured lower than the reference microphone from the 125 Hz to 1000 Hz octave bands, were somewhat in agreement at 2000 Hz, measured higher sound pressure levels than the reference microphone at 4000 Hz, and then lower at 8000 Hz. Despite not meeting the ANSI criteria for sound level meters, in some cases, these smartwatches still provide a reasonable degree of accuracy and have the potential for use in studies that require the measurement of personal noise exposure over an extended period.