Recent engineering and neuroscience applications have led to the development of brain–computer interface (BCI) systems that improve the quality of life of people with motor disabilities. In the same area, a significant number of studies have been conducted in identifying or classifying upper-limb movement intentions. On the contrary, few works have been concerned with movement intention identification for lower limbs. Notwithstanding, lower-limb neurorehabilitation is a major topic in medical settings, as some people suffer from mobility problems in their lower limbs, such as those diagnosed with neurodegenerative disorders, such as multiple sclerosis, and people with hemiplegia or quadriplegia. Particularly, the conventional pattern recognition (PR) systems are one of the most suitable computational tools for electroencephalography (EEG) signal analysis as the explicit knowledge of the features involved in the PR process itself is crucial for both improving signal classification performance and providing more interpretability. In this regard, there is a real need for outline and comparative studies gathering benchmark and state-of-art PR techniques that allow for a deeper understanding thereof and a proper selection of a specific technique. This study conducted a topical overview of specialized papers covering lower-limb motor task identification through PR-based BCI/EEG signal analysis systems. To do so, we first established search terms and inclusion and exclusion criteria to find the most relevant papers on the subject. As a result, we identified the 22 most relevant papers. Next, we reviewed their experimental methodologies for recording EEG signals during the execution of lower limb tasks. In addition, we review the algorithms used in the preprocessing, feature extraction, and classification stages. Finally, we compared all the algorithms and determined which of them are the most suitable in terms of accuracy.

Automated industrial processes require a controller to obtain an output signal similar to the reference indicated by the user. There are controllers such as PIDs, which are efficient if the system does not change its initial conditions. However, if this is not the case, the controller must be retuned, affecting production times. In this work, an adaptive PID controller is developed for a DC motor speed plant using an artificial intelligence algorithm based on reinforcement learning. This algorithm uses an actor–critic agent, where its objective is to optimize the actor’s policy and train a critic for rewards. This will generate the appropriate gains without the need to know the system. The Deep Deterministic Policy Gradient with Twin Delayed (DDPG TD3) was used, with a network composed of 300 neurons for the agent’s learning. Finally, the performance of the obtained controller is compared with a classical control one using a cost function.

This paper presents an optimal design of a surface-based polynomial fitting for tracking the maximum power point (MPPT) of a photovoltaic (PV) system, here named surface-based polynomial fitting (MPPT-SPF). The procedure of the proposed MPPT-SPF strategy is based on a polynomial model to characterize data from the PV module with a global fit. The advantage of using polynomials is that they provide a good fit within a predefined data range even though they can diverge greatly from that range. The MPPT-SPF strategy is integrated with a DC-DC boost converter to verify its performance and its interaction with different control loops. Therefore, the MPPT strategy is applied to the reference outer PI control loop, which in turn provides the current reference to the inner current loop based on a discrete-time sliding current control. A real-time and high-speed simulator (PLECS RT Box 1) and a digital signal controller (DSC) are used to implement the hardware-in-the-loop system to obtain the results. The proposed strategy does not have a high computational cost and can be implemented in a commercial low-cost DSC (TI 28069M). The proposed MPPT strategy is compared with a conventional perturb and observe method to prove its effectiveness under demanding tests.

About 8% of the Ecuadorian population suffers some type of amputation of upper or lower limbs. Due to the high cost of a prosthesis and the fact that the salary of an average worker in the country reached 248 USD in August 2021, they experience a great labor disadvantage and only 17% of them are employed. Thanks to advances in 3D printing and the accessibility of bioelectric sensors, it is now possible to create economically accessible proposals. This work proposes the design of a hand prosthesis that uses electromyography (EMG) signals and neural networks for real-time control. The integrated system has a mechanical and electronic design, and the latter integrates artificial intelligence for control. To train the algorithm, an experimental methodology was developed to record muscle activity in upper extremities associated with specific tasks, using three EMG surface sensors. These data were used to train a five-layer neural network. the trained model was compressed and exported using TensorflowLite. The prosthesis consisted of a gripper and a pivot base, which were designed in Fusion 360 considering the movement restrictions and the maximum loads. It was actuated in real time thanks to the design of an electronic circuit that used an ESP32 development board, which was responsible for recording, processing and classifying the EMG signals associated with a motor intention, and to actuate the hand prosthesis. As a result of this work, a database with 60 electromyographic activity records from three tasks was released. The classification algorithm was able to detect the three muscle tasks with an accuracy of 78.67% and a response time of 80 ms. Finally, the 3D printed prosthesis was able to support a weight of 500 g with a safety factor equal to 15.

Biomedical Electroencephalography (EEG) signals are the result of measuring the electric potential difference generated on the scalp surface by neural activity corresponding to each brain area. Accurate and automatic detection of neural activity from the upper and lower limbs using EEG may be helpful in rehabilitating people suffering from mobility limitations or disabilities. This article presents a dataset containing 7440 CSV files from 60 test subjects during motor and motor imagery tasks. The motor and motor imagery tasks performed by the test subjects were: Closing Left Hand (CLH), Closing Right Hand (CRH), Dorsal flexion of Left Foot (DLF), Plantar flexion of Left Foot (PLF), Dorsal flexion of Right Foot (DRF), Plantar flexion of Right Foot (PRF) and Resting in between tasks (Rest). The volunteers were recruited from research colleagues at ESPOL and patients at the Luis Vernaza Hospital in Guayaquil, Ecuador. Each CSV file has 501 rows, of which the first one lists the electrodes from 0 to 15, and the remaining 500 rows correspond to 500 data recorded during the task is performed due to sample rate. In addition, each file has 17 columns, of which the first one indicates the sampling number and the remaining 16 columns represent 16 surface EEG electrodes. As a data recording equipment, the OpenBCI is used in a monopolar setup with a sampling rate of 125 Hz. This work includes statistical measures about the demographic information of all recruited test subjects. Finally, we outline the experimental methodology used to record EEG signals during upper and lower limb task execution. This dataset is called MILimbEEG and contains microvolt (µV) EEG signals acquired during motor and motor imagery tasks. The collected data may facilitate the evaluation of EEG signal detection and classification models dedicated to task recognition.