Atmospheric processing and CCN formation of Saharan dust is illustrated through the analysis of a case of dust transport over northern Europe. This spread of dust is investigated by combining satellite, airborne and ground-based observations and the non-hydrostatic meso-scale model Meso-NH. The altitude of the dust plume during its transport to northwestern Europe was assessed using the CALIPSO observations and our model results. The major dust plume was transported toward Mediterranean and European regions between 2 and 5 km above sea level (a.s.l.). This is confirmed by an average particle depolarization ratio equal to 30%. Due to transport, this layer split into two layers over northern Europe, and we analyzed in this paper possible mixing of the European pollution aerosol with dust particles in the lower layer. The simulations have shown that the lower dust layer has interacted with the anthropogenic aerosol mainly over Belgium and the Netherlands. The analyses of numerical simulation results show that mineral dust particles accumulated soluble material through internal mixing over the Netherlands. The value of the CCN0.2 / CN ratio obtained over the Netherlands (~ 70%) is much greater than those observed over the Saharan region. In addition over the Netherlands, the CCN measurement reached 14 000 particles cm−3 at 0.63% supersaturation level on 30 May. Our model results reveal that more than 70% of the CCN concentration observed on 30 May can be explained by the presence of Saharan aged dust. The study reveals that heterogeneous reactions with inorganic salts converted this Saharan mineral dust into compounds that were sufficiently soluble to impact hygroscopic growth and cloud droplet activation over the Netherlands.
Global wind profile measurement has, for a long time, been a first priority for numerical weather prediction. The demonstration, from ground-based observations, that a double-edge Fabry–Pérot interferometer could be efficiently used for deriving wind profiles from the molecular scattered signal in a very large atmospheric vertical domain has led to the choice of the direct detection technique in space and the selection of the Atmospheric Dynamics Mission (ADM)-Aeolus by the European Space Agency (ESA) in 1999. ADM-Aeolus was successfully launched in 2018, after the technical issues raised by the lidar development had been solved, providing the first global wind profiles from space in the whole troposphere. Simulated and real-time assimilation of the projected horizontal wind information was able to confirm the expected improvements in the forecast score, validating the concept of a wind profiler using a single line-of-sight lidar from space. The question is raised here about consolidating the results gained from ADM-Aeolus mission with a potential operational follow-on instrument. Maintaining the configuration of the instrument as close as possible to the one achieved (UV emission lidar with a single line of sight), we revisit the concept of the receiver by replacing the arrangement of the Fizeau and Fabry–Pérot interferometers with a unique quadri-channel Mach–Zehnder (QMZ) interferometer, which relaxes the system's operational constraints and extends the observation capabilities to recover the radiative properties of clouds. This ability to profile wind and cloud/aerosol radiative properties enables the meeting of the two highest priorities of the meteorological forecasting community regarding atmospheric dynamics and radiation. We discuss the optimization of the key parameters necessary in the selection of a high-performance system, as based on previous work and development of our airborne QMZ lidar. The selected optical path difference (3.2 cm) of the QMZ leads to a very compact design, allowing the realization of a high-quality interferometer and offering a large field angle acceptance. Performance simulation of horizontal wind speed measurements with different backscatter profiles shows results in agreement with the targeted ADM-Aeolus random errors, using an optimal 45∘ line-of-sight angle. The Doppler measurement is, in principle, unbiased by the atmospheric conditions (temperature, pressure, and particle scattering) and only weakly affected by the instrument calibration errors. The study of the errors arising from the uncertainties in the instrumental calibration and in the modeled atmospheric parameters used for the backscattered signal analysis shows a limited impact under realistic conditions. The particle backscatter coefficients can be retrieved with uncertainties better than a few percent when the scattering ratio exceeds 2, such as in the boundary layer and in semi-transparent clouds. Extinction coefficients can be derived accordingly. The chosen design further allows the addition of a dedicated channel for aerosol and cloud polarization analysis.
Airborne backscatter lidar at 532 nm and in-situ measurements of black carbon (BC), carbon monoxide excess above background (ΔCO), and aerosol size distribution were carried out over Siberia in July 2013 and June 2017 in order to sample several kinds of aerosol sources. Aerosol types are derived using the Lagrangian FLEXible PARTicle dispersion model (FLEXPART) simulations and satellite observations. Six aerosol types could be identified in this work: (i) dusty aerosol mixture, (ii) Ob valley gas flaring emission, (iii) fresh forest fire, (iv) aged forest fire, (v) urban emissions over the Tomsk/Novosibirsk region (vi) long range transport of Northern China urban emission. The altitude range of aerosol layers is discussed for each aerosol type, showing transport above the boundary layer for long range transport of Northern China emissions or fresh forest fire. Comparisons of aerosol optical properties, BC and ΔCO are made between aged and fresh plumes for both the urban and forest fire emissions. An increase of aerosol optical depth at 532 nm (AOD), aerosol particle size and ΔCO is found for aged forest fire plumes. Similar results are obtained when comparing the aged urban plume from Northern China with fresh urban emissions from Siberian cities. A flight above gas flaring emissions corresponds to the largest AOD and provides a possible range of 50–60 sr for the lidar ratio of these aerosol plumes often encountered in Siberia. Black carbon concentrations are relatively higher for the flaring plume (0.4–0.5 μ) than for the urban plume (0.2 μ). The largest BC concentrations are found for the fresh forest fire plume. The aerosol type identification and AOD provided by CALIOP Version 4.2 data products in air masses with similar origin generally agree with the results obtained from our detailed analysis of the aerosol plume origins.
Two Types of Ice Clouds (TICs) have been characterized in the Arctic during the polar night and early spring. TIC-1 are composed by non-precipitating small ice crystals of less than 30 µm in diameter. The second type, TIC-2, are characterized by a low concentration of large precipitating ice crystals (>30 µm). Here, we evaluate the Weather Research and Forecasting (WRF) model performance both in space and time after implementing a parameterization based on a stochastic approach dedicated to the simulation of ice clouds in the Arctic. Well documented reference cases provided us in situ data from the spring of 2008 Indirect and Semi-Direct Aerosol Campaign (ISDAC) campaign over Alaska. Simulations of the microphysical properties of the TIC-2 clouds on 15 and 25 April 2008 (polluted or acidic cases) and TIC-1 clouds on non-polluted cases are compared to DARDAR (raDAR/liDAR) satellite products. Our results show that the stochastic approach based on the classical nucleation theory, with the appropriate contact angle, is better than the original scheme in WRF model to represent TIC-1 and TIC-2 properties (ice crystal concentration and size) in response to the IN acidification.