Dayong Wang

Prof. Dr. Dayong Wang

School of Energy and Power Engineering, Dalian University of Technology, Dalian 116023, China

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 April 2020 in Journal of Geophysical Research: Solid Earth
Verified
Journal Article
Open access
PDF file
Peng WuPeng Wu
Peng Wu
YLYanghui Li
Yanghui Li
WLWeiguo Liu
Weiguo Liu
YLYu Liu
Yu Liu
Dayong WangDayong Wang
Dayong Wang
YSYongchen Song
Yongchen Song
In this study, a microfocus X‐ray computed tomography‐based triaxial testing apparatus was used to observe and quantify the microstructure evolution of hydrate‐bearing sands during thermal dissociation of hydrate. Three triaxial shear tests with X‐ray computed tomography were conducted to study the influence of hydrate dissociation on the mechanical behavior of hydrate‐bearing sands. The results show that hydrate covering the sand particle surface dissociates first and then at the menisci between sand particles. The secondary hydrate formation mainly occurs on the menisci between sand particles and the surfaces of the hydrate shells where hydrates already exist. Hydrate dissociation could cause fabric changes in hydrate‐bearing sands, resulting in a more isotropic orientation distribution of sand particles. The failure behavior of the hydrate‐free sand specimen is similar to that of the specimen after hydrate dissociation, which shows an obvious drum‐shaped failure pattern with X‐shaped shear bands. However, the hydrate‐bearing sand specimen exhibits a shear band with a determined thickness and inclination angle. Hydrate dissociation could cause a significant loss of supporting cementation, resulting in a decline in the stiffness and failure strength. The failure strength of hydrate‐free sand specimen is slightly higher than that of the specimen after hydrate dissociation; this may due to that the homogeneous orientation frequency distribution can enhance the stability of the force chain between sand particles. The secondary hydrate formation causes sediment deformation resulting in a decrease in absolute permeability due to pore blockage.

26 July 2021 in Energy & Fuels
Verified
Journal Article
Closed access
Tao YuTao Yu
Tao Yu
GGGuoqing Guan
Guoqing Guan
Dayong WangDayong Wang
Dayong Wang
YSYongchen Song
Yongchen Song
AAAbuliti Abudula
Abuliti Abudula

2 May 2012 in Energies
Verified
Journal Article
Open access
PDF file
Jiafei ZhaoJiafei Zhao
Jiafei Zhao
CCChuanxiao Cheng
Chuanxiao Cheng
YSYongchen Song
Yongchen Song
WLWeiguo Liu
Weiguo Liu
YLYu Liu
Yu Liu
MYMingjun Yang
Mingjun Yang
The heat transfer analysis of hydrate-bearing sediment involved phase changes is one of the key requirements of gas hydrate exploitation techniques. In this paper, experiments were conducted to examine the heat transfer performance during hydrate formation and dissociation by a thermal method using a 5L volume reactor. This study simulated porous media by using glass beads of uniform size. Sixteen platinum resistance thermometers were placed in different position in the reactor to monitor the temperature differences of the hydrate in porous media. The influence of production temperature on the production time was also investigated. Experimental results show that there is a delay when hydrate decomposed in the radial direction and there are three stages in the dissociation period which is influenced by the rate of hydrate dissociation and the heat flow of the reactor. A significant temperature difference along the radial direction of the reactor was obtained when the hydrate dissociates and this phenomenon could be enhanced by raising the production temperature. In addition, hydrate dissociates homogeneously and the temperature difference is much smaller than the other conditions when the production temperature is around the 10 °C. With the increase of the production temperature, the maximum of ΔToi grows until the temperature reaches 40 °C. The period of ΔToi have a close relation with the total time of hydrate dissociation. Especially, the period of ΔToi with production temperature of 10 °C is twice as much as that at other temperatures. Under these experimental conditions, the heat is mainly transferred by conduction from the dissociated zone to the dissociating zone and the production temperature has little effect on the convection of the water in the porous media.

20 January 2021 in Energies
Verified
Journal Article
Open access
PDF file
QMQingsong Ma
Qingsong Ma
ZZZhanpeng Zheng
Zhanpeng Zheng
JFJiarui Fan
Jiarui Fan
JJJingdong Jia
Jingdong Jia
JBJingjing Bi
Jingjing Bi
Dayong WangDayong Wang
Dayong Wang
Miscible and near-miscible flooding are used to improve the performance of carbon-dioxide-enhanced oil recovery in heterogeneous porous media. However, knowledge of the effects of heterogeneous pore structure on CO2/oil flow behavior under these two flooding conditions is insufficient. In this study, we construct pore-scale CO2/oil flooding models for various flooding methods and comparatively analyze CO2/oil flow behavior and oil recovery efficiency in heterogeneous porous media. The simulation results indicate that compared to immiscible flooding, near-miscible flooding can increase the CO2 sweep area to some extent, but it is still inefficient to displace oil in small pore throats. For miscible flooding, although CO2 still preferentially displaces oil through big throats, it may subsequently invade small pore throats. In order to substantially increase oil recovery efficiency, miscible flooding is the priority choice; however, the increase of CO2 diffusivity has little effect on oil recovery enhancement. For immiscible and near-miscible flooding, CO2 injection velocity needs to be optimized. High CO2 injection velocity can speed up the oil recovery process while maintaining equivalent oil recovery efficiency for immiscible flooding, and low CO2 injection velocity may be beneficial to further enhancing oil recovery efficiency under near-miscible conditions.

27 April 2021 in Geophysical Research Letters
Verified
Journal Article
Open access
PDF file
QWQilin Wang
Qilin Wang
XCXiongyu Chen
Xiongyu Chen
Lunxiang ZhangLunxiang Zhang
Lunxiang Zhang
ZWZiming Wang
Ziming Wang
Dayong WangDayong Wang
Dayong Wang
SDSheng Dai
Sheng Dai
Hydrate‐saturation‐dependent permeability in sediments is largely affected by the pore morphology of hydrate. Hydrate pore morphology evolves from a single pore habit, which depends on its formation conditions, toward a sophisticated hybrid habit with increased hydrate saturation. Resulted permeability reduction curves in hydrate‐bearing sediments are diverse and lack universal models. By using a two‐parameter logistic function to link microscale hydrate pore habit evolution with macroscale permeability variations, this study establishes a pore‐morphology‐weighted permeability model that well captures the permeability evolution in hydrate‐bearing sediments at various conditions. The universality of this model is validated and the values of the two parameters in the model are calibrated using published laboratory and pressure core data. This newly proposed model offers a mechanistic understanding of the permeability in hydrate‐bearing sediments and an elegant expression that can be implemented in reservoir simulators for field‐scale gas production estimation.

25 May 2015 in Journal of Geophysical Research: Solid Earth
Verified
Journal Article
Open access
PDF file
Dayong WangDayong Wang
Dayong Wang
MMMichael Manga
Michael Manga
The intrusion of magmas can induce hydrothermal convection which in turn enhances the transport of heat and solutes. We use a heat convection model to interpret the temperature evolution documented by organic matter maturation, as recorded by the vitrinite reflectance Rr, in a contact aureole of a 15 m thick basaltic sill in the Deep Sea Drilling Project (DSDP) 41–368 hole near Cape Verde Rise, eastern Atlantic. Here there is a pronounced asymmetry of variations of Rr with distance above and below the sill that cannot be explained by heat conduction alone. Neglecting the effects of possible two‐phase flow and thermal pressurization from the production of fluids, convection begins to enhance the observed asymmetry for permeabilities greater than about 1 md, and the observations can be matched with permeabilities of at least several tens of millidarcies.