In this study, a microfocus X‐ray computed tomography‐based triaxial testing apparatus was used to observe and quantify the microstructure evolution of hydrate‐bearing sands during thermal dissociation of hydrate. Three triaxial shear tests with X‐ray computed tomography were conducted to study the influence of hydrate dissociation on the mechanical behavior of hydrate‐bearing sands. The results show that hydrate covering the sand particle surface dissociates first and then at the menisci between sand particles. The secondary hydrate formation mainly occurs on the menisci between sand particles and the surfaces of the hydrate shells where hydrates already exist. Hydrate dissociation could cause fabric changes in hydrate‐bearing sands, resulting in a more isotropic orientation distribution of sand particles. The failure behavior of the hydrate‐free sand specimen is similar to that of the specimen after hydrate dissociation, which shows an obvious drum‐shaped failure pattern with X‐shaped shear bands. However, the hydrate‐bearing sand specimen exhibits a shear band with a determined thickness and inclination angle. Hydrate dissociation could cause a significant loss of supporting cementation, resulting in a decline in the stiffness and failure strength. The failure strength of hydrate‐free sand specimen is slightly higher than that of the specimen after hydrate dissociation; this may due to that the homogeneous orientation frequency distribution can enhance the stability of the force chain between sand particles. The secondary hydrate formation causes sediment deformation resulting in a decrease in absolute permeability due to pore blockage.
Natural gas hydrate is considered to be a promising future energy resource; therefore, obtaining its physical properties is crucial for evaluating gas production efficiency and developing reasonable exploitation strategies. In this study, we present a novel pore‐scale 3D morphological modeling algorithm considering various saturation and occurrences (cementing and pore‐filling) of hydrate in sediments. To evaluate the performance of the presented algorithm, 14 hydrate‐bearing sediment models were constructed based on X‐ray computed tomographic images of a consolidated sandy specimen under an effective stress of 3 MPa. Morphologically, the new algorithm generated pore‐scale hydrate occurrences coincide with published morphological behaviors of hydrate observed via computed tomography. The tortuosity and fractal dimension of pore spaces of these models were then characterized. The pore networks are also extracted, based on which the evolution of the pore characteristics including the distributions of pore radius, throat radius, throat length, and the coordination number were investigated. Using these generated models, simulations of permeability, thermal conductivity, and electrical conductivity were conducted to evaluate the influences of hydrate saturation and occurrence. These results are validated against published data, demonstrating that this algorithm could be an effective way to construct digital hydrate‐bearing sediment models using a single set of computed tomographic images of a hydrate‐free specimen. This new method can also be significant for the physical evaluation of natural cores in which hydrate has dissociated during core recovering and transferring.
Carbon dioxide (CO2) sequestration plays a crucial role in reducing the levels of atmospheric CO2 and mitigating the harmful effects of global warming. Among the various CO2 sequestration technologies, CO2 marine geological sequestration emerges as a safer and more efficient alternative compared with traditional terrestrial geological sequestration. This is highly attributed to its expansive potential, safe distance from aquifers, and stable temperature and pressure conditions. This paper reviews and evaluates the main CO2 marine geological sequestration technologies, including CO2 sequestrations in shallow marine sediments, CO2, sub-seabed aquifers, and CO2-CH4 replacement. The goal of this paper is to shed light on the mechanism, potential, and challenges of each technology. Given the importance of safety in CO2 sequestration, this review also explores the potential adverse effects of CO2 leakage from reservoirs, particularly its impact on marine environments. Finally, we discuss potential development trends in CO2 marine geological technology.