The paper focuses on tall timber buildings. The major aim of this paper is to identify the most sustainable and efficient structural system to increase the height of timber buildings, also considering steel–timber hybrid structures. First of all, a brief review of tall buildings’ evolution is presented to understand why tall timber buildings are considered nowadays and which are the most adopted structural solutions. Then, the case study of the tallest timber building in the world is selected and utilized as an archetype. Once the model has been validated, seven alternative structural systems are considered by varying the horizontal load resisting system and preserving the same member cross-sections as the reference building. The variants are tested and compared in terms of material consumption, vibration characteristics and lateral load response. Using the best structural system, the height of the building is increased, pushing the structures beyond the current limits and identifying the most efficient option. The idea is to preserve the column cross-sections and balance the increase in gravity loads due to the additional floors by replacing the concrete floors with timber counterparts. With the same structural system, equivalent steel–timber hybrid solutions are finally tested and compared in terms of sustainability to timber-only counterparts and to the original project. The results of analyses show that the use of steel elements combined with timber can lead to optimized and sustainable structural solutions.

In the field of construction in seismic areas, the current Italian technical code for constructions NTC2008 is substantially based on the design criteria of Eurocode 8 (EC8), although with some differences. Focusing on steel structures with X Concentric Braces (CB), which is one of the most common seismic resistant structural typology in steel buildings, the paper illustrates a critical review of design methodologies specified in NTC2008, with the intent of providing simplified and more efficient design criteria and procedures able to ensure adequate safety levels under seismic actions, according to the modern design approach. The study is divided in two parts. The first part consists in the design according to the standard rules of typical steel X braced structures by linear analysis, both static and dynamic. The aim is identifying any possible weakness in the current design criteria, with particular reference to both the applicability of the proposed procedures and the actual possibility to size the bracing cross-sections and the connected structural members, like beams and columns. The second part consists in the assessment of the seismic response of structures examined. To this purpose, non-linear static analyses are performed in order to evaluate the most relevant behavioural issues, like the behaviour factor, the failure modes and the effectiveness of the capacity design criteria. Based on the results obtained, a proposal for the enhancement of design criteria is presented.

In monumental buildings, either residences of the nobility or churches or theaters, dating back to the last millennium, timber carpentry was spread, reaching very high levels of both structural and functional performances and more and more refined constructive technologies that allowed them to cover also very long spans. All of Europe is fully covered by magnificent examples. Among them, the Royal Palace of Naples provides significant proof of the 17th century’s building practices. Through a very deep and challenging on-site survey the identification of several structural types had been possible. This represents a very important contribution to the knowledge of existing timber structures in the valuable built heritage.