Aiting Jia Jia

Dr. Aiting Jia Jia


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 January 2021 in Sensors
Verified
Journal Article
Open access
PDF file
BHBo Hong
Bo Hong
AJAiting Jia Jia
Aiting Jia Jia
YHYuxiang Hong
Yuxiang Hong
XLXiangwen Li
Xiangwen Li
JGJiapeng Gao
Jiapeng Gao
YQYuanyuan Qu
Yuanyuan Qu
Three-dimensional (3D) zigzag-line welding seams are found extensively in the manufacturing of marine engineering equipment, heavy lifting equipment, and logistics transportation equipment. Currently, due to the large amount of calculation and poor real-time performance of 3D welding seam detection algorithms, real-time tracking of 3D zigzag-line welding seams is still a challenge especially in high-speed welding. For the abovementioned problems, we proposed a method for the extraction of the pose information of 3D zigzag-line welding seams based on laser displacement sensing and density-based clustering point cloud segmentation during robotic welding. after thee point cloud data of the 3D zigzag-line welding seams was obtained online by the laser displacement sensor, it was segmented using theρ-Approximate DBSCAN (Density-Based Spatial Clustering of Applications with Noise) algorithm. In the experiment, high-speed welding was performed on typical low-carbon steel 3D zigzag-line welding seams using gas metal arc welding. The results showed that when the welding velocity was 1000 mm/min, the proposed method obtained a welding seam position detection error of less than 0.35 mm, a welding seam attitude estimation error of less than two degrees, and the running time of the main algorithm was within 120 ms. Thus, the online extraction of the pose information of 3D zigzag-line welding seams was achieved and the requirements of welding seam tracking were met.

29 April 2023 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
JLJian Lin
Jian Lin
AJAiting Jia Jia
Aiting Jia Jia
WHWei Huang
Wei Huang
ZWZhi Wen
Zhi Wen
BHBo Hong
Bo Hong
YHYuxiang Hong
Yuxiang Hong

17 March 2024 in Sensors
Verified
Journal Article
Open access
PDF file
AJAiting Jia Jia
Aiting Jia Jia
YLYifang Luo
Yifang Luo
BHBo Hong
Bo Hong
XLXiangwen Li
Xiangwen Li
LYLi Yin
Li Yin
MLMina Luo
Mina Luo
Droplet transfer frequency is a decisive factor in welding quality and efficiency in gas tungsten arc welding (GTAW). However, there still needs to be a monitoring method for droplet transfer frequency with high precision and good real-time performance. Therefore, a real-time monitoring method for droplet transfer frequency in wire-filled GTAW using arc sensing is proposed in this paper. An arc signal acquisition system is developed, and the wavelet filtering method filters out noise from the arc signal. An arc signal segmentation method—based on the OTSU algorithm and a feature extraction method for droplet transition based on density-based spatial clustering of applications with noise (DBSCAN)—is proposed to extract the feature signal of the droplet transition. A new conception of droplet transition uniformity is proposed, and it can be used to monitor the weld bead width uniformity. Numerous experiments for monitoring droplet transfer frequency in real time are conducted with typical welding parameters. This method enables the real-time observation of droplet transfer frequency, and the result shows that the average monitoring error is less than 0.05 Hz.

9 May 2025 in Sensors
Verified
Journal Article
Open access
PDF file
YZYeming Zou
Yeming Zou
DWDongq Wang
Dongq Wang
YQYuanyuan Qu
Yuanyuan Qu
HLHao Liu
Hao Liu
AJAiting Jia Jia
Aiting Jia Jia
BHBo Hong
Bo Hong
Plasma arc welding (PAW) is commonly employed for welding medium and thick plates due to its capability of single-side welding and double-side forming. Ensuring welding quality necessitates real-time precise identification of the melting state. However, the intricate interaction between the plasma arc and the molten pool, along with substantial signal noise, poses a significant technical hurdle for achieving accurate real-time melting state identification. This study introduces a magnetically controlled method for identifying plasma arc melt-through, which integrates arc voltage and arc pool pressure. The application of an alternating transverse magnetic field induces regular oscillations in the melt pool by the plasma arc. The frequency characteristics of the arc voltage and pressure signals during these oscillations exhibit distinct mapping relationships with various fusion states. A hybrid feature extraction model combining gray correlation analysis (GRA) and the Pearson correlation coefficient (PCC) is devised to disentangle the nonlinear, non-smooth, and high-dimensional repetitive features of the signals. This model extracts features highly correlated with the fusion state to construct a feature vector. Subsequently, this vector serves as input for the fusion classification model, CNN-SVM, facilitating fusion state identification. The experimental results of melt-through under various welding speeds demonstrate the robustness of the proposed method for identifying melt-through through magnetic field-assisted melt pool oscillation, achieving an accuracy of 96%. This method holds promise for integration into the closed-loop quality control system of plasma arc welding, enabling real-time monitoring and control of melt pool quality.

19 November 2025 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
GXGuocheng Xiao
Guocheng Xiao
BHBo Hong
Bo Hong
YHYuxiang Hong
Yuxiang Hong
AJAiting Jia Jia
Aiting Jia Jia