Rousset Davy

Dr. Rousset Davy


Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 December 2020 in Atmosphere
Verified
Journal Article
Open access
PDF file
MGManuella Ghanem
Manuella Ghanem
EPEsperanza Perdrix
Esperanza Perdrix
LALaurent Alleman
Laurent Alleman
RDRousset Davy
Rousset Davy
PCPatrice CODDEVILLE
Patrice CODDEVILLE
To evaluate the chemical behavior and the health impact of welding fumes (WF), a complex and heterogeneous mixture of particulate metal oxides, two certified reference materials (CRMs) were tested: mild steel WF (MSWF-1) and stainless steel WF (SSWF-1). We determined their total chemical composition, their solubility, and their oxidative potential in a phosphate buffer (PB) solution under physiological conditions (pH 7.4 and 37 °C). The oxidative potential (OPDTT) of WF CRMs was evaluated using an acellular method by following the dithiothreitol (DTT) consumption rate (µmol DTT L−1 min−1). Pure metal salts present in the PB soluble fraction of the WF CRMs were tested individually at equivalent molarity to estimate their specific contribution to the total OPDTT. The metal composition of MSWF-1 consisted mainly of Fe, Zn, Mn, and Cu and the SSWF-1 composition consisted mainly of Fe, Mn, Cr, Ni, Cu, and Zn, in diminishing order. The metal PB solubility decreased from Cu (11%) to Fe (approximately 0.2%) for MSWF-1 and from Mn (9%) to Fe (<1%) for SSWF-1. The total OPDTT of SSWF-1 is 2.2 times the OPDTT of MSWF-1 due to the difference in oxidative capacity of soluble transition metals. Cu (II) and Mn (II) are the most sensitive towards DTT while Cr (VI), Fe (III), and Zn (II) are barely reactive, even at higher concentrations. The OPDTT measured for both WF CRMs extracts compare well with simulated extracts containing the main metals at their respective PB-soluble concentrations. The most soluble transition metals in the simulated extract, Mn (II) and Cu (II), were the main contributors to OPDTT in WF CRMs extracts. Mn (II), Cu (II), and Ni (II) might enhance the DTT oxidation by a redox catalytic reaction. However, summing the main individual soluble metal DTT response induces a large overestimation probably linked to modifications in the speciation of various metals when mixed. The complexation of metals with different ligands present in solution and the interaction between metals in the PB-soluble fraction are important phenomena that can influence OPDTT depletion and therefore the potential health effect of inhaled WF.

1 January 2016 in International Journal of Hygiene and Environmental Health
Verified
Journal Article
Closed access
SHSébastien Hulo
Sébastien Hulo
ARAnca Radauceanu
Anca Radauceanu
NCNathalie Chérot-Kornobis
Nathalie Chérot-Kornobis
MHMichael HOWSAM
Michael HOWSAM
VVVéronique Vacchina
Véronique Vacchina
JEJean-Louis Edme
Jean-Louis Edme

1 November 2016 in Toxicology Letters
Verified
Journal Article
Open access
ARAnca Radauceanu
Anca Radauceanu
MGMichel Grzebyk
Michel Grzebyk
JEJean-Louis Edmé
Jean-Louis Edmé
NCNathalie Chérot-Kornobis
Nathalie Chérot-Kornobis
RDRousset Davy
Rousset Davy
SHSébastien Hulo
Sébastien Hulo
To analyze the effects of occupational exposure to poorly soluble forms of beryllium (Be) on biomarkers of pulmonary inflammation using exhaled breath condensate (EBC) in workers employed in machining industries. Twenty machining operators were compared to 16 controls. The individual exposure to Be was assessed from the work history with several indices of exposure calculated on the basis of task-exposures matrices developed for each plant using historical air measurements. Clinical evaluation consisted in a medical questionnaire, measurements of biomarkers in EBC (tumor necrosis factor alpha (TNF-α), total nitrogen oxides (NOx)), measurement of the fraction of exhaled nitric oxide (FeNO) and resting spirometry. Adjusted multiple linear regressions were used to study the effect of the exposure to Be on inflammatory biomarkers. Levels of TNF-α and NOx in EBC were not statistically different between exposed and controls. We found a statistically significant relationship between levels of TNF-α in EBC and both index of cumulative exposure and duration of exposure to Be. No other statistically significant relationships were found between exposure to Be and pulmonary response. Our results suggest that machining-related exposure to Be is related to pulmonary inflammation involving TNF-α. These findings must be confirmed by larger studies.

7 November 2014 in Annals of Occupational Hygiene
Verified
Journal Article
Open access
PDF file
RVRaymond Vincent
Raymond Vincent
MGMartine Gillet
Martine Gillet
PGPierre Goutet
Pierre Goutet
CGChristine Guichard
Christine Guichard
CHCatherine Hédouin-Langlet
Catherine Hédouin-Langlet
RDRousset Davy
Rousset Davy
A campaign to measure exposure to hexavalent chromium compounds was carried out in France by the seven CARSAT chemistry laboratories, CRAMIF laboratory, and INRS over the 2010–2013 period. The survey included 99 companies involved in various activity sectors. The inhalable fraction of airborne particles was sampled, and exposure levels were determined using ion chromatography analysis combined with post-column derivatization and UV detection. The quality of the measurement results was guaranteed by an inter-laboratory comparison system involving all the laboratories participating in this study. Exposure levels frequently exceeded the French occupational exposure limit value (OELV) of 1 µg m−3, in activities such as thermal metallization and manufacturing and application of paint in the aeronautics sector. The results also reveal a general trend for a greater proportion of soluble Chromium VI (Cr VI) compounds compared with insoluble compounds. Qualitative and quantitative information relating to the presence of other metallic compounds in the air of workplaces is also provided, for example for Cr III, Ni, Fe, etc. The sampling strategy used and the measurement method are easy to implement, making it possible to check occupational exposure with a view to comparing it to an 8 h-OELV of 1 µg m−3.

21 March 2024 in Environmental Science: Processes & Impacts
Verified
Journal Article
Closed access
PDF file
MGManuella Ghanem
Manuella Ghanem
LALaurent Alleman
Laurent Alleman
RDRousset Davy
Rousset Davy
EPEsperanza Perdrix
Esperanza Perdrix
PCPatrice CODDEVILLE
Patrice CODDEVILLE
Inhalation of welding fumes (WFs) containing high levels of transition metals (Cr, Cu, Fe, Mn, Ni…) is associated with numerous health effects including oxidative stress. However, the measurements of the oxidative potential (OP) and bioaccessibility of WF transition metals depend on several physicochemical parameters and may be subject to several experimental artifacts. In this work, we investigated the influence of the experimental conditions that may affect the bioaccessibility of transition metals and their OP on stainless-steel WF extracts. WFs were produced using a generation bench and sampled on filters. The soluble fraction of the metals was analysed. Two different extraction fluids mimicking physiological pulmonary conditions were studied: phosphate buffer and Hatch's solution. Three extraction times were tested to determine the optimal time for a significant OPDTT using the dithiothreitol (DTT) method. The storage conditions of WFs after filter sampling such as duration, temperature and atmospheric conditions were investigated. The results indicate that experimental conditions can significantly affect the OPDTT and metal bioaccessibility analyses. Cr, Cu and Ni show higher solubility in Hatch's solution than in the phosphate buffer. Mn is highly sensitive to DTT and shows close solubility in the two fluids. An extraction time of 0.5 h in phosphate buffer allows a better sensitivity to OPDTT, probably by limiting complexations, interactions between metals and precipitation. Storage time and temperature can influence the physical or chemical evolution of the WFs, which can affect their OPDTT and Mn solubility. However, storage under N2(g) limits these changes. On-line measurements of OPDTT could provide an alternative to filter sampling to overcome these artifacts.

2 January 2016 in Journal of Occupational and Environmental Hygiene
Verified
Journal Article
Closed access
RDRousset Davy
Rousset Davy
TDThibaut Durand
Thibaut Durand
Modification of an existing sequential extraction procedure for inorganic beryllium species in the particulate matter of emissions and in working areas is described. The speciation protocol was adapted to carry out beryllium extraction in closed-face cassette sampler to take wall deposits into account. This four-step sequential extraction procedure aims to separate beryllium salts, metal, and oxides from airborne particles for individual quantification. Characterization of the beryllium species according to their solubility in air samples may provide information relative to toxicity, which is potentially related to the different beryllium chemical forms. Beryllium salts (BeF2, BeSO4), metallic beryllium (Bemet), and beryllium oxide (BeO) were first individually tested, and then tested in mixtures. Cassettes were spiked with these species and recovery rates were calculated. Quantitative analyses with matched matrix were performed using inductively coupled plasma mass spectrometry (ICP-MS). Method Detection Limits (MDLs) were calculated for the four matrices used in the different extraction steps. In all cases, the MDL was below 4.2 ng/sample. This method is appropriate for assessing occupational exposure to beryllium as the lowest recommended threshold limit values are 0.01 µg.m−3 in France[ 1 Agence nationale de sécurité sanitaire de l'alimentation, de l'environnement et du travail (ANSES): Avis de l'Agence nationale de sécurité sanitaire de l'alimentation, de l'environnement et du travail relative à la proposition de valeurs limites d'exposition à des agents chimiques en milieu professionnel: Le béryllium et ses composés. [Notice from the French National Agency for Food Safety, Environment and Labour on the proposed exposure limits to chemical agents in the workplace: beryllium and its compounds]. Paris : ANSES, 2010. [Google Scholar] ] and 0.05 µg.m−3 in the USA.[2 ACGIH: 2010 Threshold Limit Values (TLVs®) and Biological Exposures Indices (BEIs®) – Beryllium and Compounds. Cincinnati, OH: ACGIH, 2010. [Google Scholar]] The protocol was then tested on samples from French factories where occupational beryllium exposure was suspected. Beryllium solubility was variable between factories and among the same workplace between different tasks.