The main purpose of this paper is to investigate the contributions of building-integrated photovoltaic (BIPV) systems to the notion of nearly zero-energy cities in the capitals of the European Union member states (EU), Norway, and Switzerland. Moreover, an in-depth investigation of the barriers and challenges ahead of the widespread rollout of BIPV technology is undertaken. This study investigates the scalability of the nearly zero-energy concept using BIPV technology in moving from individual buildings to entire cities. This study provide a metric for architects and urban planners that can be used to assess how much of the energy consumed by buildings in Europe could be supplied by BIPV systems when installed as building envelope materials on the outer skins of buildings. The results illustrate that by 2030, when buildings in the EU become more energy-efficient and the efficiency of BIPV systems will have improved considerably, BIPV envelope materials will be a reasonable option for building skins and will help in achieving nearly zero-energy cities. This study reveals that in the EU, taking a building skin to building net surface area ratio of 0.78 and a building skin glazing ratio of 30%, buildings could cover their electricity consumption using BIPV systems by 2030. Eighteen challenges and barriers to the extensive rollout of BIPV systems are recognised, classified, and discussed in this study in detail. The challenges are categorised into five stages, namely the decision, design, implementation, operation and maintenance, and end of life challenges.
Building integrated photovoltaics is one of the key technologies when it comes to electricity generation in buildings, districts or urban areas. However, the potential of building façades for the BIPV system, especially in urban areas, is often neglected. Façade-mounted building integrated photovoltaics could contribute to supply the energy demand of buildings in dense urban areas with economic feasibility where the availability of suitable rooftop areas is low. This paper deals with the levelised cost of electricity (LCOE) of building integrated photovoltaic systems (BIPV) in the capitals of all the European member state countries plus Norway and Switzerland and presents a metric to investigate a proper subsidy or incentive for BIPV systems. The results showed that the average LCOE of the BIPV system as a building envelope material for the entire outer skin of buildings in Europe is equal to 0.09 Euro per kWh if its role as the power generator is considered in the economic calculations. This value will be 0.15 Euro per kWh if the cost corresponding to its double function in the building is taken into the economic analysis (while the average electricity price is 0.18 Euro per kWh). The results indicate that the BIPV generation cost in most case studies has already reached grid parity. Furthermore, the analysis reveals that on average in Europe, the BIPV system does not need a feed-in tariff if the selling price to the grid is equal to the purchasing price from the grid. Various incentive plans based on the buying/selling price of electricity from/to the main grid together with LCOE of the BIPV systems is also investigated.
The business model of building-integrated photovoltaics (BIPV) is developing expeditiously and BIPV will soon be recognised as a building envelope material for the entire building skins, among other alternatives such as brick, wood, stone, metals, etc. This paper investigates the effect of climate on the solar radiation components on building skins and BIPV materials in the northern hemisphere. The selected cities are Stavanger in Norway, Bern in Switzerland, Rome in Italy, and Dubai in the UAE. The study showed that for all the studied climates, the average incident radiation on the entire building skins is slightly more than the average incident radiation on the east or west facades, regardless of the orientations of the building facades. Furthermore, the correlation between solar radiation components and different BIPV technologies is discussed in this paper. It is also found that when it comes to the efficiency of different BIPV cells, the impact of the climate on some of the BIPV technologies (such as DSC and OSC) is much more significant than others (such as c-Si, mc-Si and CIGS). The evidence from this study suggests that in climates with higher diffuse radiation-or with more overcast days per year-the contribution of IR radiation decreases. Therefore, the efficiency of BIPV materials that their spectral responses are dependent on the IR radiation (like Si and CIGS) in such a climate would drop down meaningfully. On the other hand, the DSC and OSC solar cells could be a good option for cloudy climates since they have more stable performance, even in such a climate. Although, their efficiency compared to other BIPV materials such as Si-based BIPV solar cells is still significantly less thus far.
Sustainable architecture encompasses more than energy efficiency, zero carbon dioxide (CO2) emission or renewable energy use in the built environment. It also needs to alleviate overall impacts on the natural environment or ecosystem that surrounds it. It may be argued that primitive vernacular architecture (architecture without architects) built and operated using local techniques and resources alone can be considered to be sustainable. Yet later, after the 1992 Rio Conference and its declarations, more specific definitions emerged putting weight on the rational use of land area, materials and energy, preferably local, as well as area efficient planning, economy and recyclability. The advantage of this is to reduce the ecological footprint of buildings and the climate gas emissions from a sector that represents 35–50 percent of global climate gas emissions, depending on how one counts. This paper clarifies concepts, questions cemented truths and points a way forward by asking; what’s next?
The prosperous implementation of Building Integrated Photovoltaics (BIPV), as well as Building Attached Photovoltaics (BAPV), needs an accurate and detailed assessment of the potential of solar irradiation and electricity production of various commercialised technologies in different orientations on the outer skins of the building. This article presents a dataset for the solar incident radiation and electricity production of PV systems in the north and south orientations in a dense urban area (in the northern hemisphere). The solar incident radiation and the electricity production of two back-to-back PV panels with a ten-centimetre gap for one year are monitored and logged as primary data sources. Using Microsoft Excel, both panels’ efficiency is also presented as a secondary source of data. The implemented PV panels are composed of polycrystalline silicon cells with an efficiency of 16.9%. The results depicted that the actual efficiency of the south-facing panel (13–15%) is always closer to the standard efficiency of the panel compared to the actual efficiency of the north-facing panel (8–12%). Moreover, although the efficiency of the south-facing panel on sunny days of the year is almost constant, the efficiency of the north-facing panel decreases significantly in winter. This phenomenon might be linked to the spectral response of the polycrystalline silicon cells and different incident solar radiation spectrum on the panels. While the monitored data cover the radiation and system electricity production in various air conditions, the analysis is mainly conducted for sunny days, and more investigation is needed to analyse the system performance in other weather conditions (like cloudy and overcast skies). The presented database could be used to analyse the performance of polycrystalline silicon PV panels and their operational efficiency in a dense urban area and for different orientations.
The Norwegian electric vehicle deployment success came about for several reasons. The country's huge hydropower capacity delivering 99% of its electric energy has been the backbone of the argument for the introduction of electric vehicles here since 1988. This was coupled with the design and implementation of the world's most generous incentives for battery electric vehicles (BEV) from 1994, an act that later led to soaring sales. In 2012, 3% of all cars sold in Norway were BEVs and Norway was the World's 5th largest volume market for BEVs. By the end of 2017 there were over 142,490 BEVs and by 2020 it is forecasted that every second car sold will be a BEV. However, in addition to the BEV sales, the sales of Plug in Hybrid Electric Vehicles (PHEV) have soared. In the first two months of 2017, 49% of all sold personal cars, not vans and buses, in Norway were BEVs and PHEVs. The order book for March 2018 of one large supplier, Volkswagen (VW), showed that 70,4% of the personal car orders were electric (BEVs and PHEVs). The goal is an all-electric vehicle fleet. The paper responds to three questions: 1. How did this success come about? 2. What is the link between electric vehicles and buildings? 3. What can case studies such as that of Norway teach us about the mobility revolution?
About Me
Professor at University of Stavanger, Architect. Solar Energy pioneer and experienced designer of ZEMCHs.
Professor at University of Stavanger, Architect. Solar Energy pioneer and experienced designer of ZEMCHs.