The paper presents the main results of a research project directed to the development of mathematical models for the design and simulation of combined Gas Turbine-Steam or Diesel-Steam plants for marine applications. The goal is to increase the energy conversion efficiency of both gas turbines and diesel engines, adopted in ship propulsion systems, by recovering part of the thermal energy contained in the exhaust gases through Waste Heat Recovery (WHR) dedicated installations. The developed models are used to identify the best configuration of the combined plants in order to optimize, for the different applications, the steam plant layout and the performance of WHR plant components. This research activity has allowed to obtain significant improvements in terms of energy conversion efficiency, but also on other important issues: dimensions and weights of the installations, ship load capacity, environmental compatibility, investment and operating costs. In particular, the main results of the present study can be summarized as follows: (a) the quantitative assessment of the advantages (and limits) deriving by the application of a Combined Gas And Steam (COGAS) propulsion system to a large container ship, in substitution of the traditional two-stroke diesel engine; (b) the proposal of optimized WHR propulsion and power systems for an oil tanker, for which a quantitative evaluation is given of the attainable advantages, in terms of fuel consumption and emissions reduction, in comparison with more traditional solutions.

A turbocharged diesel engine numerical model, suitable for real-time ship manoeuvre simulation, is presented in this paper. While some engine components (mainly the turbocharger, intercooler and manifolds) are modelled by a filling and emptying approach, the cylinder simulation is based on a set of five-dimensional numerical matrices (each matrix is generated by means of a more traditional thermodynamic model based on in-cylinder actual cycle). The new cylinder calculation approach strongly reduces the engine transient computation time, making it possible to transform the simulation model into a real-time executable application. As a case study, the simulation methodology is applied to a high speed four stroke turbocharged marine diesel engine, whose design and off design running data are available from the technical sheet. In order to verify the suitability of the proposed model in real-time simulation applications, a yacht propulsion plant simulator is developed. Numerical results in ship acceleration and deceleration manoeuvres are shown, reducing the simulation running time of 99% in comparison with the corresponding in-cylinder actual cycle engine model.