A multiphase model based on statistical averaging is applied for simulation of the columnar-to-equiaxed transition (CET) during solidification of Al–7wt-%Si non-refined and refined alloys under microgravity conditions. Simulations are performed in one-dimensional approximation, taking into account real boundary conditions through thermal sources in the energy equation. The comparison between calculated positions of CET and measured positions in the MACE experiments is made. An agreement is obtained when using values of the nucleation undercooling of ΔTNe=6 K and ΔTNe=5 K for non-refined and refined alloy, respectively.
Numerical investigation of the variations in the crystallization front shape during growth of gadolinium gallium and terbium gallium garnet crystals in the same thermal zone and comparison of the obtained results with the experimental data have been performed. It is shown that the difference in the behavior of the crystallization front during growth of the crystals is related to their different transparency in the IR region. In gadolinium gallium garnet crystals, which are transparent to thermal radiation, a crystallization front, strongly convex toward the melt, is formed in the growth stage, which extremely rapidly melts under forced convection. Numerical analysis of this process has been performed within the quasistationary and nonstationary models. At the same time, in terbium gallium garnet crystals, which are characterized by strong absorption of thermal radiation, the phase boundary shape changes fairly smoothly and with a small amplitude. In this case, as the crystal is pulled, the crystallization front tends to become convex toward the crystal bulk.
The heat transfer processes occurring in the solid and liquid phases during growth of Bi12GeO20 and Bi4Ge3O12 crystals by the low-thermal gradient Czochralski method are analyzed and compared. It is experimentally found that, under similar growth conditions, the deflection of the crystallization front for the Bi12GeO20 crystal is considerably smaller than the deflection of the crystallization front for the Bi4Ge3O12 crystal and the faceting of the former front is observed at the earlier stage of pulling. The results of the numerical simulation demonstrate that the different behavior of the crystallization fronts is associated with the difference between the coefficients of thermal absorption in the crystals.
In the present work macrosegregation during solidification of a 2.45 ton steel ingot is simulated with a pure equiaxed model, which was tested previously via modeling of a benchmark experiment. While the columnar structure is not taken into account, a packed layer formed over inner walls of the mold at an early stage of solidification reproduces to some extent phenomena generally related to zones of columnar dendrites. Furthermore, it is demonstrated that interaction of free-floating equiaxed grains with ascending convective flow in the bulk liquid results in flow instabilities. This defines the irregular form of the negative segregation zone, the formation of which at the ingot bottom corresponds to experimental observation. Vertical channels reported in experimental measurements are reproduced in simulations. It is confirmed that intensification of ingot cooling may decrease segregation in the ingot.