A drastic reduction in the residual voltage (from ~ 100 V to a few volts) and a significant (factor of ~ 2) increase in the dU/dt switching rate is demonstrated experimentally in the superfast ( ~ 200 ps) avalanche switching of a GaAs bipolar junction transistor with increased emitter area. This result is not a trivial one as only a small number of conductive channels of a few micrometers in diameter participate in the transient independently of the emitter size, while the remaining (passive) part of the structure supplies the switching channels with the currents circulating inside the chip, which makes the impact ionization in the filaments even more powerful. Excellent agreement was found between the experiment and a ¿two-transistor¿ model specially developed here, with one transistor simulating the switching channels and the other the nonswitched part of the structure. Much higher switching stability and reproducibility and much lower power dissipation were observed in the structure with increased emitter area.
1 April 2002 in Journal of Quantitative Spectroscopy and Radiative Transfer
A simple miniature source generating pulse trains with a central frequency of ∼100 GHz and a duration of 50–100 ps has been demonstrated recently. The source is based on nanometer-scale collapsing field domains (CFDs) generated in the collector of an avalanching bipolar GaAs transistor. The central frequency is determined by the domain transient time across the collector, and thus, a routine increase in the oscillation frequency from 0.1 to 0.3–0.5 THz would require a reduction in the collector thickness by a factor of 3–5. This is not acceptable, however, since it would reduce the maximum blocking voltage affecting the achievable peak current across the avalanche switch. We suggest here a solution to this challenging problem by reducing the CFD travel distance while keeping the collector thickness unchanged. Here, the discovered and interpreted phenomenon of CFD collapse when entering a dense carrier plasma zone made it possible by means of bandgap engineering. A CFD emitter generating ∼200 GHz wavetrains of ∼100 ps in duration is demonstrated. This finding opens an avenue for the increase in the oscillation frequency without any reduction in the emitted power, by using a smart structure design.
Numerical investigation of the variations in the crystallization front shape during growth of gadolinium gallium and terbium gallium garnet crystals in the same thermal zone and comparison of the obtained results with the experimental data have been performed. It is shown that the difference in the behavior of the crystallization front during growth of the crystals is related to their different transparency in the IR region. In gadolinium gallium garnet crystals, which are transparent to thermal radiation, a crystallization front, strongly convex toward the melt, is formed in the growth stage, which extremely rapidly melts under forced convection. Numerical analysis of this process has been performed within the quasistationary and nonstationary models. At the same time, in terbium gallium garnet crystals, which are characterized by strong absorption of thermal radiation, the phase boundary shape changes fairly smoothly and with a small amplitude. In this case, as the crystal is pulled, the crystallization front tends to become convex toward the crystal bulk.
A steady-state short-circuit photocurrent across polycrystalline Pb(ZrTi)O3(PZT) film is found to be directed opposite to ferroelectric polarization, defined by the magnitude of polarization, but it is not the depolarization current of the ferroelectric. To explain this, the authors assume that Pt/PZT/Ir capacitor consists of PZT grains and semiconductor PbO phase segregated on PZT grain boundaries and forming conducting channels. In such medium, uncompensated polarization charge can arise at the PZT/PbO interface and generate the electric field acting on carriers in PbO channels, thus producing the photocurrent across the film. The relation between the polarization charge and electric field is considered.
A drift-diffusion model of unsteady carrier transport in an M/lead zirconate titanate (PZT)/M structure is proposed. It is assumed that the PZT film has electronic conductivity. Electrons are generated by oxygen vacancies and trapped by Ti+3 deep centers. It is assumed that electrons move in the electric field by hopping between titanium atoms, with an effective mobility that is considered constant. To account for the polarization, it is believed that, near the contacts, there are thin defective layers in which the polarization is zero, while outside these layers, the polarization does not vary across the film thickness and depends on the applied bias. The model was used to account for the formation of the current peak in the current–voltage curves, which is not caused by the domain switching and observed in epitaxial films only when the bias and polarization directions coincide. It is shown that a pronounced current peak is formed when (а) an accumulated space-charge layer appears near one of the contacts under the action of polarization and (b) this contact is cathode, which is only possible when the polarization and bias directions coincide. As a result, electrons flow between space-charge layers, and the film resistance first decreases and then starts to increase again, and this gives rise to a current peak. It is shown that this effect is purely nonstationary. The model also made it possible to estimate the basic parameters of the structure: electron mobility, density of oxygen vacancies, dielectric constant, defect layer thickness, and barrier height.