In order to understand the impacts of dielectric barrier on the discharge characteristics of a nanosecond pulsed surface dielectric barrier discharge (NS-DBD), the effects of dielectric constant and dielectric barrier thickness are numerically investigated by using a three-equation drift–diffusion model with a 4-species 4-reaction air chemistry. When the dielectric constant increases, while the dielectric barrier thickness is fixed, the streamer propagation speed (V), the maximum streamer length (L), the discharge energy ( ), and the gas heating ( ) of a pulse increase, but the plasma sheath thickness (h), the fast gas heating efficiency , and the charge densities on the wall surface decrease. When the dielectric barrier thickness increases, while the dielectric constant is fixed, V, L, , and of a pulse decrease, but h, , and the charge densities on the wall surface increase. It can be concluded that the increase of the dielectric constant or the decrease of the dielectric barrier thickness results in the increase of the capacitance of the dielectric barrier, which enhances the discharge intensity. Increasing the dielectric constant and thinning the dielectric barrier layer improve the performance of the NS-DBD actuators.
This paper puts forward an aerodynamic design method to improve the high-speed aerodynamic performance of an aircraft with low-aspect-ratio tailless configuration. The method can ameliorate the longitudinal moment characteristics of the configuration by designing and collocating the key section airfoils with the constrains of fixed parameters of planform shape and capacity. Firstly, the effect of twisting the wing, fore-loading and aft-reflexing key section airfoils on the high-speed aerodynamic performance of the configuration is evaluated by high-fidelity numerical methods, and quantified by defining trimming efficiency factors. Then, a linear superposition formula is obtained by analyzing the effect rule of trimming efficiency factor, and based on the formula the design and collocation methods of key section airfoils are achieved. According to the methods, a trimmed configuration is obtained. The results of computational fluid dynamics (CFD) and wind tunnel tests show that the trimmed configuration has smaller zero-lift pitching moment and higher available lift-to-drag ratio than the initial configuration at cruise, besides the trimmed configuration achieves the design principle raised for tailless configuration, which can be described as the zero-pitching moment, cruising design lift coefficient, and maximum lift-to-drag ratio are coincident. In addition, at off-design conditions, the trimmed configuration shows favorable drag divergence characteristics, satisfactory aerodynamic characteristics at medium-altitude maneuvering condition, and good stall and pitching-moment performance at low speed state.
11 May 2012 in Science China Technological Sciences