Flexible pressure sensors can convert mechanical stimuli to electrical signals to interact with the surroundings, mimicking the functionality of the human skins. Piezocapacitive pressure sensors, a class of most widely used devices for artificial skins, however, often suffer from slow response-relaxation speed (tens of milliseconds) and thus fail to detect dynamic stimuli or high-frequency vibrations. Here, we show that the contact-separation behavior of the electrode-dielectric interface is an energy dissipation process that substantially determines the response-relaxation time of the sensors. We thus reduce the response and relaxation time to ~0.04 ms using a bonded microstructured interface that effectively diminishes interfacial friction and energy dissipation. The high response-relaxation speed allows the sensor to detect vibrations over 10 kHz, which enables not only dynamic force detection, but also acoustic applications. This sensor also shows negligible hysteresis to precisely track dynamic stimuli. Our work opens a path that can substantially promote the response-relaxation speed of piezocapacitive pressure sensors into submillisecond range and extend their applications in acoustic range.
Flexible skins that can be laminated on curved surfaces are a desired form for wind pressure measurement. Sensors for such applications need to detect both negative and positive wind pressure with ultrahigh pressure resolution over a wide range up to 600 kPa, whereas existing flexible sensors are unsatisfactory to such demands. Here, we report a flexible skin containing two iontronic pressure sensors for negative pressure and positive pressure sensing, respectively, and show the potential of the skin for pressure measurement in room temperature wind tunnels. We control the contact state of iontronic interface of a sensor to introduce a pre-pressure that enables negative pressure sensing, exhibiting a pressure resolution of −20 Pa (0.025%) within a broad pressure regime (from −100 kPa to −10 Pa). The other sensor for positive pressure sensing exhibits a pressure-resolution of 100 Pa (0.025%) over 600 kPa, in addition to a wide frequency bandwidth up to 400 Hz. The skin with the two types of sensors can be attached on curved surfaces of wing surface for pressure measurement at various free stream velocities and angles of attack. This study provides a promising technology of using flexible skins for pressure measurement in aviation applications.
1 October 2020 in Reliability Engineering & System Safety
In order to understand the impacts of dielectric barrier on the discharge characteristics of a nanosecond pulsed surface dielectric barrier discharge (NS-DBD), the effects of dielectric constant and dielectric barrier thickness are numerically investigated by using a three-equation drift–diffusion model with a 4-species 4-reaction air chemistry. When the dielectric constant increases, while the dielectric barrier thickness is fixed, the streamer propagation speed (V), the maximum streamer length (L), the discharge energy ( ), and the gas heating ( ) of a pulse increase, but the plasma sheath thickness (h), the fast gas heating efficiency , and the charge densities on the wall surface decrease. When the dielectric barrier thickness increases, while the dielectric constant is fixed, V, L, , and of a pulse decrease, but h, , and the charge densities on the wall surface increase. It can be concluded that the increase of the dielectric constant or the decrease of the dielectric barrier thickness results in the increase of the capacitance of the dielectric barrier, which enhances the discharge intensity. Increasing the dielectric constant and thinning the dielectric barrier layer improve the performance of the NS-DBD actuators.
Numerical investigation on a nanosecond repetitively pulsed dielectric barrier discharge (NS-DBD) in air is a temporal and spatial multi-scale problem involving a large number of species and chemical reactions. To know the effects of the species and chemical reactions on the discharge characteristics and energy balance, a high voltage repetitive plane to plane NS-DBD is numerically studied. Four groups of species and the corresponding chemical reactions are adopted in the investigation. The most complex one has 31 species and 99 chemical reactions that contains all reaction types, in particular, the vibrational-translational relaxation reactions, whereas the simplest one has only 4 species and 4 reactions, which represents the main kinetic processes. The others are in between. The discharge energy reaches to a periodic phase equality state after the second pulse in the repetitive pulses, and the present analysis is focused on the 7th pulse. All the mixture reaction models predict almost the same discharge energies, which are qualitatively similar with that in the simplified 4-species model. The prediction of the discharge energy is determined by the electronic excitation and the energy gain by ions, but the vibrational excitation, negative ions, associative ionization, dissociation of nitrogen and oxygen molecules have very weak effects. The gas heating is determined by the exothermic reactions and the ions. The main processes in the fast and slow gas heating are the energy release of ions and the exothermic reactions, respectively. The negative ions, vibrational excitation, and associative ionization have very weak effects on the gas heating during the high voltage pulse, but they have considerable effects at a larger time scale. The magnitudes of the fast gas heating efficiency ( ) are in the range of 41%∼47% in the mixture reduced kinetic models, but is higher in the 4-reaction model.
1 August 2025 in Journal of Physics: Conference Series
Airworthiness certification represents a highly complex amalgamation of technical and managerial activities, the risks of which have historically been challenging to assess and quantify directly. Drawing on fundamental concepts such as risk management and the “three principles” model of airworthiness certification, this paper proposes an innovative risk assessment method and model for airworthiness clauses. By reconstructing two evaluation dimensions—the capability dimension for airworthiness compliance and the cost dimension for clause compliance—this study breaks through the limitation that traditional risk assessment models cannot accurately assess complex technologies and management processes. It enables a systematic qualitative assessment of various internal and external factors, including capability, cost, management, and industry standards, thereby effectively identifying the main technical challenges and risks in airworthiness certification. The risk assessment process for the selected clause 25.963 is described, and, in conjunction with practical results from a specific model, the proposed method demonstrates feasibility in the risk assessment of airworthiness clauses.