Balamurugan Thirumalraj

Dr. Balamurugan Thirumalraj


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 June 2022 in Environmental Research
Verified
Journal Article
Closed access
BTBalamurugan Thirumalraj
Balamurugan Thirumalraj
DJDhayanantha Prabu Jaihindh
Dhayanantha Prabu Jaihindh
SASaleh O. Alaswad
Saleh O. Alaswad
MSM.S.P. Sudhakaran
M.S.P. Sudhakaran
MSMuthusamy Selvaganapathy
Muthusamy Selvaganapathy
KKKyungjung Kwon
Kyungjung Kwon

7 January 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
Chelladurai KaruppiahChelladurai Karuppiah
Chelladurai Karuppiah
BTBalamurugan Thirumalraj
Balamurugan Thirumalraj
SASrinivasan Alagar
Srinivasan Alagar
SPShakkthivel Piraman
Shakkthivel Piraman
YLYing-Jeng Jame Li
Ying-Jeng Jame Li
Chun-Chen YangChun-Chen Yang
Chun-Chen Yang
Developing a highly stable and non-precious, low-cost, bifunctional electrocatalyst is essential for energy storage and energy conversion devices due to the increasing demand from the consumers. Therefore, the fabrication of a bifunctional electrocatalyst is an emerging focus for the promotion and dissemination of energy storage/conversion devices. Spinel and perovskite transition metal oxides have been widely explored as efficient bifunctional electrocatalysts to replace the noble metals in fuel cell and metal-air batteries. In this work, we developed a bifunctional catalyst for oxygen reduction and oxygen evolution reaction (ORR/OER) study using the mechanochemical route coupling of cobalt oxide nano/microspheres and carbon black particles incorporated lanthanum manganite perovskite (LaMnO3@C-Co3O4) composite. It was synthesized through a simple and less-time consuming solid-state ball-milling method. The synthesized LaMnO3@C-Co3O4 composite was characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, Brunauer-Emmett-Teller (BET) analysis, X-ray diffraction spectroscopy, and micro-Raman spectroscopy techniques. The electrocatalysis results showed excellent electrochemical activity towards ORR/OER kinetics using LaMnO3@C-Co3O4 catalyst, as compared with Pt/C, bare LaMnO3@C, and LaMnO3@C-RuO2 catalysts. The observed results suggested that the newly developed LaMnO3@C-Co3O4 electrocatalyst can be used as a potential candidate for air-cathodes in fuel cell and metal-air batteries.

16 April 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Chelladurai KaruppiahChelladurai Karuppiah
Chelladurai Karuppiah
CWChao-Nan Wei
Chao-Nan Wei
KNKarikalan Natarajan
Karikalan Natarajan
ZWZong-Han Wu
Zong-Han Wu
BTBalamurugan Thirumalraj
Balamurugan Thirumalraj
Chun-Chen YangChun-Chen Yang
Chun-Chen Yang
A novel design and synthesis methodology is the most important consideration in the development of a superior electrocatalyst for improving the kinetics of oxygen electrode reactions, such as the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) in Li-O2 battery application. Herein, we demonstrate a glycine-assisted hydrothermal and probe sonication method for the synthesis of a mesoporous spherical La0.8Ce0.2Fe0.5Mn0.5O3 perovskite particle and embedded graphene nanosheet (LCFM(8255)-gly/GNS) composite and evaluate its bifunctional ORR/OER kinetics in Li-O2 battery application. The physicochemical characterization confirms that the as-formed LCFM(8255)-gly perovskite catalyst has a highly crystalline structure and mesoporous morphology with a large specific surface area. The LCFM(8255)-gly/GNS composite hybrid structure exhibits an improved onset potential and high current density toward ORR/OER in both aqueous and non-aqueous electrolytes. The LCFM(8255)-gly/GNS composite cathode (ca. 8475 mAh g−1) delivers a higher discharge capacity than the La0.5Ce0.5Fe0.5Mn0.5O3-gly/GNS cathode (ca. 5796 mAh g−1) in a Li-O2 battery at a current density of 100 mA g−1. Our results revealed that the composite’s high electrochemical activity comes from the synergism of highly abundant oxygen vacancies and redox-active sites due to the Ce and Fe dopant in LaMnO3 and the excellent charge transfer characteristics of the graphene materials. The as-developed cathode catalyst performed appreciable cycle stability up to 55 cycles at a limited capacity of 1000 mAh g−1 based on conventional glass fiber separators.

20 March 2023 in Batteries
Verified
Journal Article
Open access
PDF file
PMPriyatrisha Mathur
Priyatrisha Mathur
JSJeng-Ywan Shih
Jeng-Ywan Shih
YLYing-Jeng James Li
Ying-Jeng James Li
Tai-Feng HungTai-Feng Hung
Tai-Feng Hung
BTBalamurugan Thirumalraj
Balamurugan Thirumalraj
Chun-Chen YangChun-Chen Yang
Chun-Chen Yang
LiFePO4 is one of the industrial, scalable cathode materials in lithium-ion battery production, due to its cost-effectiveness and environmental friendliness. However, the electrochemical performance of LiFePO4 in high current rate operation is still limited, due to its poor ionic- and electron-conductive properties. In this study, a zeolitic imidazolate framework (ZIF-8) and multiwalled carbon nanotubes (MWCNT) modified LiFePO4/C (LFP) composite cathode materials were developed and investigated in detail. The ZIF-8 and MWCNT can be used as ionic- and electron-conductive materials, respectively. The surface modification of LFP by ZIF-8 and MWCNT was carried out through in situ wet chemical and mechanical alloy coating. The as-synthesized materials were scrutinized via various characterization methods, such as XRD, SEM, EDX, etc., to determine the material microstructure, morphology, phase, chemical composition, etc. The uniform and stable spherical morphology of LFP composites was obtained when the ZIF-8 coating was processed by the agitator [A], instead of the magnetic stirrer [MS], condition. It was found that the (optimum of) 2 wt.% ZIF-8@LFP [A]/MWCNT composite cathode material exhibited outstanding improvement in high-rate performance; it maintained the discharge capacities of 125 mAh g−1 at 1C, 110 mAh g−1 at 3C, 103 mAh g−1 at 5C, and 91 mAh g−1 at 10C. Better cycling stability with capacity retention of 75.82% at 1C for 100 cycles, as compared to other electrodes prepared in this study, was also revealed. These excellent results were mainly obtained because of the improvement of lithium-ion transport properties, less polarization effect, and interfacial impedance of the LFP composite cathode materials derived from the synergistic effect of both ZIF-8 and MWCNT coating materials.

26 April 2018 in Journal of the Electrochemical Society
Verified
Journal Article
Closed access
PDF file
SKSubbiramaniyan Kubendhiran
Subbiramaniyan Kubendhiran
CRChellakkannu Rajkumar
Chellakkannu Rajkumar
SCShih-Hsun Chen
Shih-Hsun Chen
QYQin-Jin Yeah
Qin-Jin Yeah
BTBalamurugan Thirumalraj
Balamurugan Thirumalraj
The sulfide ions are easily found in real water and waste water samples, whilst it can lead to personal distress owing to their toxic effects on aquatic life. Thus, the determination of sulfide ion S2− in environmental samples is much important for human health. Hence, we developed an electrochemical sensor for charge based electrochemical determination of sulfide ions in water samples using poly-L-lysine modified electrode. The sulfide ions can oxidize on the PLL-film by taking an advantage of charge based concentration of sulfide ions. The PLL-modified electrode was characterized by scanning electron microscope, Fourier transform infrared spectroscopy, and energy-dispersive X-ray spectroscopy. The PLL modified electrode exhibits excellent electrocatalytic activity towards the detection of sulfide ions. In addition, the LSV performance of PLL modified electrode offers a lower detection potential, higher sensitivity and fast response towards the detection of sulfide ions. The linear concentration for sulfide ions determination ranges from 11.8–6663 μM with a detection limit of 2.65 μM was observed. The proposed sensor offers high selectivity in presence of various anions and cations. Besides, the PLL-modified electrode exhibits good recovery results for the detection of sulfide ions in different water samples.