The effects of post-annealing on the crystal structure, microstructure, and microwave dielectric properties for Ba(Co0.7Zn0.3)1/3Nb2/3O3 ceramics were investigated. The as-prepared materials were characterized by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. The microwave dielectric properties are measured at 6 GHz using a network analyzer. Ba5Nb4O15 and/or Ba8(Co,Zn)1Nb6O24 secondary phases were found on the surface according to sintering conditions due to volatilization of some Zn and Co elements. The experimental results show that the beneficial effect of the annealing steps to improved the microwave dielectric properties. Excellent microwave dielectric properties were achieved for the coarse-grained microstructures by a higher sintering temperature and with a shorter holding time followed by annealing steps at lower temperatures with a longer holding time. This improvement can be attributed to 1:2 cation ordering within the crystal, which is taking place during annealing process. The Ba(Co0.7Zn0.3)1/3Nb2/3O3 ceramic could be used successfully for realization of dielectric microwave resonators, since it has a high quality factor Qf value of 123,700 GHz, a high dielectric constant εr value of 34.5 and a temperature coefficient of the resonant frequency τf of 0 ppm/°C.
1 January 2020 in Journal of Advances in Nanotechnology
Proton exchange membrane fuel cells (PEMFCs) are considered to be a promising solution for clean energy conversion in hydrogen electric vehicles. Accurate voltage prediction is crucial for designing efficient energy management and control strategies. While deep neural networks have shown good potential in modeling PEMFCs, the role of optimization algorithms and training performance criteria in achieving accurate voltage predictions remains unclear. This research aims to carry out a comprehensive comparative study using three popular optimization algorithms and different performance criteria including prediction accuracy, convergence speed, and training stability. A real experimental dataset for a Nexa PEMFC system has been used to train and evaluate different models of artificial neural networks (ANNs) to find out which optimization algorithm and performance criteria are best for efficient modeling of PEMFCs under varying operating conditions. The results of this study are analyzed through a comparative evaluation of different metaheuristic optimization algorithms applied within a unified ANN training framework for PEMFC voltage prediction. Particle swarm optimization (PSO) provides the highest voltage prediction accuracy and robust convergence behavior, whereas Grey Wolf Optimization (GWO) achieves the fastest convergence with reduced computational time.
22 July 2022 in Advances in Materials Science and Engineering
The present research is devoted to the optimization of the sintering schedule of Ba (Co0.7Zn0.3)1/3Nb2/3O3 (BCZN) dielectric ceramics for microwaves applications. A novel approach to the heat treatment of these ceramics based on the rapid-rate sintering (RRS) technique followed by a lower temperature annealing cycle has been developed. The relationships among the heat treatment process optimization, the structural, microstructural characteristics, and the microwave dielectric properties of the BCZN ceramics were investigated using X-ray diffraction, scanning electron microscopy, energy dispersion analysis, and vector network analysis. The RRS-technique shortens substantially the time required for the elaboration of these components in comparison with conventional sintering techniques and prevents simultaneously the formation of secondary phases as Ba5Nb4O15 and Ba8(Co, Zn) 1Nb6O24 on the surface of the ceramics. All of the sintered and annealed ceramics exhibit a high quality factor QF close to 110 000GHz at 6GHz. The high dielectric constant εr of 34.5 and a temperature coefficient of the resonant frequency τf of 0ppm.C-1 were obtained in all annealed ceramics.