Jei-Pil Wang

Prof. Jei-Pil Wang

Pukyong National Unitversity
orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 February 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
Jei-Pil WangJei-Pil Wang
Jei-Pil Wang
Erdenebold UrtnasanErdenebold Urtnasan
Erdenebold Urtnasan
Copper smelting slag is a solution of molten oxides created during the copper smelting and refining process, and about 1.5 million tons of copper slag are generated annually in Korea. The oxides in copper smelting slag include ferrous (FeO), ferric oxide (Fe2O3), silica (SiO2 from flux), alumina (AI2O3), calcia (CaO) and magnesia (MgO). The main oxides in copper slag, which are iron oxide and silica, exist in the form of fayalite (2FeO·SiO2). Since copper smelting slag contains high content of iron, and copper and zinc, common applications of copper smelting slag can be used in value-added products such as abrasive tools, roofing granules, road-base construction, railroad ballast, fine aggregate in concrete, etc. Some studies have attempted to recover metal values from copper slag. This research was intended to recover ferrous alloy contained Cu, a raw material of zinc, from copper slag, and produce reformed slag such as blast furnace slag for Portland cement. As a result, it was confirmed that with reduction smelting by carbon at temperatures above 1400 °C, it is possible to recover pig iron containing copper from copper smelting slag, and the addition of CaO in reduction smelting helped to reduce iron oxide in the fayalite and change the chemical and mineralogical composition of the slag. The copper oxide in the slag can be easily reduced and dissolved in the molten pig iron, and zinc oxide is also reduced to a volatile zinc, which is removed from the furnace as fumes, by carbon during the reduction process. When CaO addition is above 5%, acid slag is completely transformed into calcium silicate slag and is observed to be like blast furnace slag.

1 September 2017 in Applied Surface Science
Verified
Journal Article
Closed access
JLJin-Seok Lee
Jin-Seok Lee
YAYoung-Soo Ahn
Young-Soo Ahn
GKGi-Hwan Kang
Gi-Hwan Kang
Jei-Pil WangJei-Pil Wang
Jei-Pil Wang

1 January 2015 in Procedia Manufacturing
Verified
Journal Article
Open access
DLDong-Won Lee
Dong-Won Lee
HLHak-Sung Lee
Hak-Sung Lee
JPJi-Hwan Park
Ji-Hwan Park
SSShun-Myung Shin
Shun-Myung Shin
Jei-Pil WangJei-Pil Wang
Jei-Pil Wang
Sintering by the TiH2 and Ti powder compaction was performed at 1423∼1623K for 2hours at 1.33x10-3Pa. The sinter-ability of TiH2 powder was higher than that of pure titanium powder, leading to near 99% of relative density, which was the competing level with that by HIP process. In the direct sintering of TiH2 powder compaction, the interstitial hydrogen atoms was released before sintering through the grain boundaries and meet the titanium oxide phase existing in the grain boundaries as the film forms. We found thermodynamically there that the hydrogen atoms could effectively reduce the titanium oxide existing on the powder surfaces or grain boundaries with a considerable driving force of about -250kJ/mole. Such a self-reduction process by hydrogen atoms makes the grain boundaries very clean with oxide-free condition and helpful for sintering. Moreover, the de-hydrogenated titanium regions near grain boundaries could become unstable due to the formation of many vacancy defects by the release of hydrogen and also evoke the sintering ability

1 January 2009 in ISIJ International
Verified
Journal Article
Closed access
Jei-Pil WangJei-Pil Wang
Jei-Pil Wang
WCW. D. Cho
W. D. Cho

9 February 2019 in Metals
Verified
Journal Article
Open access
PDF file
Seonmin HwangSeonmin Hwang
Seonmin Hwang
DLDong-Won Lee
Dong-Won Lee
Jei-Pil WangJei-Pil Wang
Jei-Pil Wang
The metallic tantalum powder was successfully synthesized via reduction of tantalum pentoxide (Ta2O5) with magnesium gas at 1073~1223 K for 10 h inside the chamber held under an argon atmosphere. The powder obtained after reduction shows the Ta–MgO mixed structure and that the MgO component was dissolved and removed fully via stirring in a water-based HCl solution. The particle size in the tantalum powder obtained after acid leaching was shown to be in a range of 50~300 nm, and the mean internal crystallite sizes measured by the Scherrer equation varied from 11.5 to 24.7 nm according to the increase in reduction temperatures. The temperature satisfactory for a maximal reduction effect was found to be 1173 K because the oxygen content was minimally saturated to about 1.3 wt %.

1 February 2015 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Verified
Journal Article
Open access
SJSung-Ho Joo
Sung-Ho Joo
SSShun-Myung Shin
Shun-Myung Shin
DSDong-Ju Shin
Dong-Ju Shin
Jei-Pil WangJei-Pil Wang
Jei-Pil Wang
This study focused on a newly proposed recycling process to recover electrodic powder enriched in cobalt (Co) and lithium (Li) from spent lithium primary and ion batteries. In addition, this new process was designed to prevent the explosion of batteries during thermal treatment under an inert atmosphere. Spent lithium mixed batteries were heated over the range of 300 °C to 600 °C for 2 h, and each component was completely separated inside the reactor after the experiment. Electrodic powder was successfully recovered from the bulk components through sieving; the powder contained several pieces of metals. The electrodic powder obtained was examined using X-ray diffraction, energy dispersive X-ray spectroscopy, and atomic absorption spectroscopy. Additionally, an image of the powder was taken using scanning electron microscopy. The cobalt and lithium were mainly recovered at approximately 32–35 wt% and 3–5 wt% in the electrodic powder, respectively.