In this paper, the sinusoidal error compensation method based on particle swarm optimization (PSO) is researched for the problem of subdivision precision loss caused by sinusoidal error in grating moiré signal. On the basis of the principle of arctangent subdivision of grating moiré signal, the subdivision error caused by sinusoidal error is quantitatively analyzed. In view of the sinusoidal error compensation method, the signal compensation method is complicated to calculate and occupies many resources, and a sinusoidal error angle compensation method is proposed. The principle of the sinusoidal error angle compensation method based on the PSO algorithm is explained in detail; Aiming at the large computational of PSO algorithm, the appropriate PSO parameters are selected experimentally, and the complexity of the PSO algorithm is minimized while ensuring the fitting accuracy. The parameters of signal waveform equation are solved by using the PSO algorithm on the FPGA platform. According to the result of parameter solving, a lookup table for sinusoidal error compensation is designed. The grating system platform is built to verify the effect of the compensation scheme on the FPGA platform. The results show that the compensation method can effectively reduce the sinusoidal error component in the signal, and the subdivision error is reduced from 0.95″ to 0.56″ in the time domain. And the zero-order, first-order, second-order, and third-order components are significantly suppressed. The compensation scheme can realize the sinusoidal error compensation of the grating moiré signal, and effectively improve the measurement accuracy of the grating encoder.
14 November 2019 in IET Circuits, Devices & Systems
The authors have proposed a robust linearisation method for determining the angles of sinusoidal signals generated by gratings. This scheme solves the problem of non‐linear subdivision by compensating sinusoidal signal. The conventional coordinate rotation digital computer (CORDIC) algorithm is optimised by double‐rotation iteration, and the calculation accuracy of arcsine and arccosine functions is improved. A pipeline preprocessing circuit based on the CORDIC is designed for the signal compensation and digital subdivision. The two processes are implemented on a field‐programmable gate array chip, which exhibits a wide input range and good dynamic response. A theoretical analysis using stable signals from a function generator verifies that the subdivision system achieves the ideal subdivision effect. The subdivision system is further applied to an angle‐measuring device for a 16,384‐line circular grating. The results of subdivision exhibit good linearity for the grating moiré signal. Compared to the angular measurement by a laser interferometer within the three grating lines, the angle‐measurement accuracy of ±0.000138° (0.5″) and the relative error is ±0.63% over a travel angle of three grating lines. Notably, the measurement error of the subdivision system is only half of that in a similar commercial product (MicroE system).
20 November 2020 in IEEE Transactions on Instrumentation and Measurement
Moiré signal subdivision is essential to the application of gratings. Focusing on the complexity and difficulty of quadrature compensation for the Moiré signals, we propose a new method that can directly subdivide nonorthogonal Moiré signals. A detailed description of the digital subdividing system for this method is provided herein. Compared with conventional methods, the proposed method requires fewer hardware resources and features shorter delays. The effects of various parameters on the subdivision process are discussed, and the quantitative relationships between the signal amplitude ratio, signal sampling frequency ratio, and subdivision value are determined. Finally, evaluation tests are performed using a laboratory-made field-programmable gate array subdivision circuit. The results confirmed the effectiveness of the subdivision method, revealing a subdivision error of less than 0.6”.
17 October 2022 in IEEE Transactions on Instrumentation and Measurement
Angle is an important physical quantity in International Systems of Units (SI). The precise measurement of an angle is of great significance for scientific research and production. The circular grating is a widely used angle measurement sensor because of its large range and high resolution. Subdivision is the key part of grating measurement to ensure high resolution. In order to guarantee the subdivision function, we propose an adaptive filter to suppress the noises in the moiré signals of the circular grating. The principle of subdivision is introduced and the arc-tangent subdivision method mapping the phase of the moiré signals into the displacement is adopted. The influence of noises on subdivision results is analyzed by building the error model of the moiré signals. A detailed description of the adapted filter, which is composed of a linear prediction filter and the least mean square (LMS) adaptive algorithm, is provided herein. The structure of the adapted filter is optimized with a symmetrical structure and the hardware resources are reduced by about 1/3. Finally, evaluation tests are performed with a calibration platform for positioning the accuracy of a turntable and a laboratory-made field-programmable gate array (FPGA) circuit. The results confirmed that the adaptive filter proposed in this article can filter out random noises more effectively than the conventional finite impulse response (FIR) filter with the same order, revealing a phase error fluctuates within [−0.012, +0.003 rad]. The positioning accuracy of the turntable with a laboratory-made circuit using an adaptive filter is better than 0.8.
In view of the limitations of the existing eccentricity error separation method of the rotary table, an eccentricity error separation method based on the phase feature of the moiré signal of a single reading head is proposed herein. A grating pair transmission model is established based on the analysis of the principle of the rotary table; thereby, the influence of eccentricity error on the phase feature of the moiré signal in the rotation course of the rotary table is clarified, and the corresponding model between the phase feature spectral components and the eccentricity error is established. The verification experiments of the proposed method are carried out based on the laboratory-made circuit system. After verifying the accuracy of the data acquisition of the laboratory-made circuit board, the verification experiments of the eccentricity error separation effect of the proposed method are carried out. The experimental data are compared with those of the traditional method, and the results show that the error between the two methods is 2.34 μm, while the relative error is 2.3%.