We proposed a synaptic transistor gated using a Ta2O5 barrier-layered organic chitosan electric double layer (EDL) applicable to a micro-neural architecture system. In most of the previous studies, a single layer of chitosan electrolyte was unable to perform lithography processes due to poor mechanical/chemical resistance. To overcome this limitation, we laminated a high-k Ta2O5 thin film on chitosan electrolyte to ensure high mechanical/chemical stability to perform a lithographic process for micropattern formation. Artificial synaptic behaviors were realized by protonic mobile ion polarization in chitosan electrolytes. In addition, neuroplasticity modulation in the amorphous In–Ga–Zn-oxide (a-IGZO) channel was implemented by presynaptic stimulation. We also demonstrated synaptic weight changes through proton polarization, excitatory postsynaptic current modulations, and paired-pulse facilitation. According to the presynaptic stimulations, the magnitude of mobile proton polarization and the amount of weight change were quantified. Subsequently, the stable conductance modulation through repetitive potential and depression pulse was confirmed. Finally, we consider that proposed synaptic transistor is suitable for advanced micro-neural architecture because it overcomes the instability caused when using a single organic chitosan layer.
With the growing demand for bio- and eco-friendly artificial synapses, we propose a novel synaptic transistor using natural bovine-milk-based biocompatible polymers as an electrical double layer (EDL). A method for forming an EDL membrane, which plays a key role in synaptic devices, was established using a milk-based biocompatible polymer. The frequency-dependent capacitance of a milk-based polymer-EDL was evaluated by constructing an EDL capacitor (EDLC) with indium-tin-oxide (ITO) electrode. As a result, a significantly large capacitance (1.48 μF/cm2 at 1 Hz) was identified as an EDL effect due to the proton charge of the bovine-milk-based polymer, which is much more superior compared to conventional insulating materials such as SiO2. Subsequently, by using a milk-based polymer-EDL membrane in the fabrication of electronic synaptic transistors, we successfully implemented important synaptic functions, such as paired-pulse facilitation, dynamic filtering, and synaptic-weight-integration-based logic operations. Therefore, the proposed milk-based biocompatible polymer-EDL membrane offers new opportunities for building eco-friendly and biodegradable artificial synaptic systems.
We proposed the enhancement of the electrical properties of solution-processed indium–tin–oxide (ITO) thin films through microwave irradiation (MWI) and argon (Ar) gas plasma treatment. A cost- and time-effective heat treatment through MWI was applied as a post-deposition annealing (PDA) process to spin-coated ITO thin films. Subsequently, the sheet resistance of MWI ITO thin films was evaluated before and after plasma treatment. The change in the sheet resistance demonstrated that MWI PDA and Ar plasma treatment significantly improved the electrical properties of the ITO thin films. Furthermore, X-ray photoelectron spectroscopy and X-ray diffraction analyses showed that the electrical properties of the ITO thin films were enhanced by the increase in oxygen vacancies due to the ion bombardment effect of high-energy plasma ions during Ar plasma treatment. Changes in the band gap structure of the ITO thin film due to the ion bombardment effect were also analyzed. The combination of MWI PDA and Ar plasma treatment presents new possibilities for improving the high-conductivity sol–gel ITO electrode.
20 January 2025 in Japanese Journal of Applied Physics
We established atomic layer deposition (ALD) process of InZnOx (IZO) and fabricate the ALD IZO FETs for comprehensive characterization, aimed at advancing nanosheet structure and monolithic 3D (M3D) integration technologies. Thermal stability and composition/thickness dependence on device characteristics are systematically explored. Our findings reveal that ALD IZO FETs maintain high thermal stability at temperatures up to 400 °C, and we identify critical trade-offs among key parameters such as mobility, threshold voltage (Vth), and initial Vth shift (ΔVth) under positive bias stress conditions. ALD IZO FETs show higher mobility, lower Vth, and especially smaller initial ΔVth than previously reported our ALD InGaOx (IGO) FETs. These improvements are linked to the intrinsic differences in oxygen dissociation energy between the Zn and Ga in the compound of InOx. The material properties and device behavior of IZO FETs obtained in this work will provide insights for their application in M3D integration.
1 October 2025 in Japanese Journal of Applied Physics
We fabricated nanosheet oxide semiconductor FETs with InGaZnOx (IGZO) channel grown by thermal atomic layer deposition (ALD) process. The effects of annealing, channel thickness, and composition on performance and reliability were systematically investigated. IGZO FETs achieved normally-off operation with positive threshold voltage (Vth) while maintaining high mobility compared to InGaOx (IGO) FETs. The devices showed thermal stability up to 400 °C post-deposition annealing, compatible with BEOL process. Excess oxygen is a unique issue in ALD by oxygen-rich chemical reaction process compared to sputtering. The positive bias stress reliability issue in thin channel IGO FETs caused by excess oxygen was mitigated by adding Zn. This study can provide an insight for designing IGO-based FETs in terms of composition and channel thickness optimization for 3D LSI applications.