This paper aims to quantify the improvement obtained with a purely rotational Raman (PRR) channel over a vibro-rotational Raman (VRR) channel, used in an aerosol lidar with elastic and Raman channels, in terms of signal-to-noise ratio (SNR), effective vertical resolution, and absolute and relative uncertainties associated to the retrieved aerosol optical (extinction and backscatter) coefficients. Measurements were made with the European Aerosol Research Lidar Network/Universitat Politècnica de Catalunya (EARLINET/UPC) multi-wavelength lidar system enabling a PRR channel at 353.9 nm, together with an already existing VRR (386.7 nm) and an elastic (354.7 nm) channels. Inversions were performed with the EARLINET Single Calculus Chain (SCC). When using PRR instead of VRR, the measurements show a gain in SNR of a factor 2.8 and about 7.6 for 3-h nighttime and daytime measurements, respectively. For 3-h nighttime (daytime) measurements the effective vertical resolution is reduced by 17% (20%), the absolute uncertainty (associated to the extinction) is divided by 2 (10) and the relative uncertainty is divided by 3 (7). During daytime, VRR extinction coefficient is retrieved in a limited height range (<2.2 km) preventing the SCC from finding a suitable calibration range in the search height range. So the advantage of using PRR instead of VRR is particularly evidenced in daytime conditions. For nighttime measurements, decreasing the time resolution from 3 to 1 h has nearly no effect on the relative performances of PRR vs. VRR.
Advances in interference filter technology permit currently using selected parts of the N2 and O2 pure rotational Raman spectra with very low temperature sensitivity, while rejecting sufficiently the elastic return. The Raman technique to retrieve the aerosol extinction coefficient can then be used with higher signal-to-noise ratios, because of a higher (about 8 times) effective differential backscatter cross-section as compared to the cross-section of the N2 vibro-rotational spectra. The design and results of pure rotational Raman channels at 354 nm and 530 nm allowing daytime aerosol extinction measurements implemented at the EARLINET/ACTRIS Barcelona lidar station are presented and discussed.
31 March 2026 in Journal of the Optical Society of America A
Phase contrast is an optical imaging technique used to visualize phase objects through spatial filtering that combines amplitude and phase modulation. Comparable results, however, can also be achieved using purely amplitude-based filters. In this work, we present a numerical study on the influence of the transmittance shape and size of two-dimensional amplitude filters on the visualization of specific binary and quadratic phase distributions in a coherent 4 f Fourier optical system. Five types of amplitude transmittance filters are analyzed: opaque disk, conical five-stepped conical, conical, Gaussian, and angularly variable. An experimental implementation of the technique using opaque disks and a simplified version of an angular variable transmittance filter is used to demonstrate the impact on the resulting images of the binary and quadratic phase objects.
We assess the temperature stability requirements of unseeded Nd:YAG lasers in lidar systems for atmospheric temperature profiling through the rotational Raman technique. Taking as a reference a system using a seeded laser assumed to emit pulses of negligible spectral width and wavelength-drift free, we estimate first the effect of the pulse spectral widening of the unseeded laser on the output of the interference filters, then we derive the limits of the allowable wavelength drift for a given bias in the temperature measurement that would add to the noise-induced uncertainty. Finally, using spectroscopic data, we relate the allowable wavelength drift to allowable temperature variations of the YAG rod. We find that, in order to keep the bias affecting atmospheric temperature measurements smaller than 1 K, the Nd:YAG rod temperature should also be kept within 1 K.
13 August 2024 in Atmospheric Measurement Techniques
We assess the temperature stability requirements of unseeded Nd:YAG lasers in lidar systems for atmospheric temperature profiling through the rotational Raman technique. Taking as a reference a system using a seeded laser assumed to emit pulses of negligible spectral width and free of wavelength drifts, we estimate first the effect of the pulse spectral widening of the unseeded laser on the output of the interference filters, and then we derive the limits of the allowable wavelength drift for a given bias in the temperature measurement that would add to the noise-induced uncertainty. Finally, using spectroscopic data, we relate the allowable wavelength drift to allowable temperature variations in the YAG rod. We find that, in order to keep the bias affecting atmospheric temperature measurements smaller than 1 K, the Nd:YAG rod temperature should also be kept within a variation range of 1 K.