Biosensors are ubiquitous in a variety of disciplines, such as biochemical, electrochemical, agricultural, and biomedical areas. They can integrate various point-of-care applications, such as in the food, healthcare, environmental monitoring, water quality, forensics, drug development, and biological domains. Multiple strategies have been employed to develop and fabricate miniaturized biosensors, including design, optimization, characterization, and testing. In view of their interactions with high-affinity biomolecules, they find application in the sensitive detection of analytes, even in small sample volumes. Among the many developed techniques, microfluidics have been widely explored; these use fluid mechanics to operate miniaturized biosensors. The currently used commercial devices are bulky, slow in operation, expensive, and require human intervention; thus, it is difficult to automate, integrate, and miniaturize the existing conventional devices for multi-faceted applications. Microfluidic biosensors have the advantages of mobility, operational transparency, controllability, and stability with a small reaction volume for sensing. This review addresses biosensor technologies, including the design, classification, advances, and challenges in microfluidic-based biosensors. The value chain for developing miniaturized microfluidic-based biosensor devices is critically discussed, including fabrication and other associated protocols for application in various point-of-care testing applications.

In recent years, there has been immense advancement in the development of nanobiosensors as these are a fundamental need of the hour that act as a potential candidate integrated with point-of-care-testing for several applications, such as healthcare, the environment, energy harvesting, electronics, and the food industry. Nanomaterials have an important part in efficiently sensing bioreceptors such as cells, enzymes, and antibodies to develop biosensors with high selectivity, peculiarity, and sensibility. It is virtually impossible in science and technology to perform any application without nanomaterials. Nanomaterials are distinguished from fine particles used for numerous applications as a result of being unique in properties such as electrical, thermal, chemical, optical, mechanical, and physical. The combination of nanostructured materials and biosensors is generally known as nanobiosensor technology. These miniaturized nanobiosensors are revolutionizing the healthcare domain for sensing, monitoring, and diagnosing pathogens, viruses, and bacteria. However, the conventional approach is time-consuming, expensive, laborious, and requires sophisticated instruments with skilled operators. Further, automating and integrating is quite a challenging process. Thus, there is a considerable demand for the development of nanobiosensors that can be used along with the POCT module for testing real samples. Additionally, with the advent of nano/biotechnology and the impact on designing portable ultrasensitive devices, it can be stated that it is probably one of the most capable ways of overcoming the aforementioned problems concerning the cumulative requirement for the development of a rapid, economical, and highly sensible device for analyzing applications within biomedical diagnostics, energy harvesting, the environment, food and water, agriculture, and the pharmaceutical industry.

Nano fluids are widely used today for various energy-related applications such as coolants, refrigerants, and fuel additives. New coolants and design modifications are being explored due to renewed interest in improving the working fluid properties of heat exchangers. Several studies have investigated nanofluids to enhance radiator and heat exchanger performance. A new class of coolants includes single, binary, and tertiary nanoparticle-based hybrid nano-coolants using ethylene glycol/deionized water combinations as base fluids infused with different nanoparticles. This review article focuses on the hydrothermal behavior of heat exchangers (radiators for engine applications) with mono/hybrid nanofluids. The first part of the review focuses on the preparation of hybrid nanofluids, highlighting the working fluid properties such as density, viscosity, specific heat, and thermal conductivity. The second part discusses innovative methodologies adopted for accomplishing higher heat transfer rates with relatively low-pressure drop and pump work. The third part discusses the applications of mono and hybrid nanofluids in engine radiators and fuel additives in diesel and biodiesel blends. The last part is devoted to a summary of the research and future directions using mono and hybrid nanofluids for various cooling applications.

Using pathogen-infected food that can be unhygienic can result in severe diseases and an increase in mortality rate among humans. This may arise as a serious emergency problem if not appropriately restricted at this point of time. Thus, food science researchers are concerned with precaution, prevention, perception, and immunity to pathogenic bacteria. Expensive, elongated assessment time and the need for skilled personnel are some of the shortcomings of the existing conventional methods. Developing and investigating a rapid, low-cost, handy, miniature, and effective detection technology for pathogens is indispensable. In recent times, there has been a significant scope of interest for microfluidics-based three-electrode potentiostat sensing platforms, which have been extensively used for sustainable food safety exploration because of their progressively high selectivity and sensitivity. Meticulously, scholars have made noteworthy revolutions in signal enrichment tactics, measurable devices, and portable tools, which can be used as an allusion to food safety investigation. Additionally, a device for this purpose must incorporate simplistic working conditions, automation, and miniaturization. In order to meet the critical needs of food safety for on-site detection of pathogens, point-of-care testing (POCT) has to be introduced and integrated with microfluidic technology and electrochemical biosensors. This review critically discusses the recent literature, classification, difficulties, applications, and future directions of microfluidics-based electrochemical sensors for screening and detecting foodborne pathogens.

Even today, most biomarker testing is executed in centralized, dedicated laboratories using bulky instruments, automated analyzers, and increased analysis time and expenses. The development of miniaturized, faster, low-cost microdevices is immensely anticipated for substituting for these conventional laboratory-oriented assays and transferring diagnostic results directly onto the patient’s smartphone using a cloud server. Pioneering biosensor-based approaches might make it possible to test biomarkers with reliability in a decentralized setting, but there are still a number of issues and restrictions that must be resolved before the development and use of several biosensors for the proper understanding of the measured biomarkers of numerous bioanalytes such as DNA, RNA, urine, and blood. One of the most promising processes to address some of the issues relating to the growing demand for susceptible, quick, and affordable analysis techniques in medical diagnostics is the creation of biosensors. This article critically discusses a short review of biosensors used for detecting nucleic acid biomarkers, and their use in biomedical prognostics will be addressed while considering several essential characteristics.

Inorganic scintillators are used in extreme environments is essential in applications such as nuclear fusion, marine and space exploration, etc. Radiation resistance is requirement for scintillators to be used in above mentioned applications. It is important to calculate the gamma buildup factors for inorganic scintillators to understand its radiation resistance behaviour. The gamma-ray and neutron interaction parameters were calculated for inorganic scintillators such as BaF₂, BGO, CdWO₄, CaF₂(Eu), CaWO₄, CsI, CsI(Na), CsI(Tl), Gd₂O₂S, LaBr₃(Ce), LaCl₃(Ce), PbWO₄, LSO(Ce), LYSO(Ce), NaI(Tl), YAG(Ce), ZnS(Ag), ZnWO₄. The gamma ray interaction parameters such as mass attenuation coefficient, half value layer, tenth value layer, effective atomic number, equivalent atomic number, exposure and energy absorption buildup factor were computed using Phy-X/PSD software. The neutron interaction parameters such as fast neutron removal crosssection, and mass attenuation factor for thermal and fast neutron were computed using Phy-X/PSD and NGCal software respectively. The present calculated mass attenuation coefficient values are compared with geant4 data available in the literature. The higher values of Z_eff were found for PbWO₄ upto 0.1 MeV and above 0.1 MeV, CsI(Tl) has higher Z_eff values. However, the Zeq values were found to be higher for PbWO₄ in the whole energy range. The mass attenuation factor for thermal and fast neutron was found that Gd₂O₂S has highest value and BGO has lowest value. The present investigation indicates that the inorganic scintillator PbWO₄ has an excellent gamma-ray sensing response.