Sustainable construction is widely regarded as one of the best decisions to reduce the environmental impact of the buildings. Numerous scientific efforts have been devoted to promoting sustainability by adopting different techniques such as life cycle assessment (LCA) and building information modeling (BIM). The recent circular economy (CE) agenda is prioritizing in different sectors including construction due to increasing concern on the materials efficiency and resources consumption. Therefore, this study aimed to identify the implications, considerations, contributions and challenges of BIM integrated LCA and the CE adoption in the industry by critically analyzing the recent literature. A scientometric analysis was applied to the selected studies to show the knowledge among BIM, LCA and CE relationships. With a comprehensive analysis of major challenges and opportunities of LCA and BIM for construction sustainability, key drivers for sustainable building design were identified and analyzed. A prospective integrated framework for CE adoption into BIM-based LCA of buildings and an evaluation method are proposed by analyzing the contemporary issues. It is believed that the analyzed critical issues, identified future research direction and proposed frameworks and this methodology should contribute to effective implementation of CE into the building for promoting sustainable construction.
The construction of bridge is a complex process and involves diverse energy emission-intensive materials. The evaluation of environmental impacts on the basis of life cycle assessment (LCA) is a recognised technique to find the scope of impact mitigation and save resources. However, the studies on the LCA of bridges are rare and lack assessment on the impact of public transportation during bridge construction. The purpose of this study was to develop an integrated exergy-based LCA model for assessing the environmental sustainability of bridges by investigating their environmental impacts and exergy footprint. The proposed exergy-based LCA model consists of three principal assessment models, namely, the environmental impact of energy consumption, pollutant discharge, and resource consumption. The proposed model was then exemplified with a highway bridge as a case study. The results found that the environmental impact in the raw material production and processing stage was the largest, followed by the construction stage and the operation and maintenance stage at second and third place, respectively. The findings of this study can contribute to mitigating the environmental impacts of bridge construction, and the assessment approach can be adopted to guide the environmental impact evaluation for other types of civil constructions globally.
The objective of this study is to evaluate and predict the energy use in different buildings during COVID-19 pandemic period at St. Olavs Hospital in Trondheim. Based on machine learning, operational data from St. Olavs hospital combined with weather data will be used to predict energy use for the hospital.Analysis of the energy data showed that the case buildings at the hospital did not have any different energy use during the pandemic this year compared to the same period last year, except for the lab center. The energy consumption of electricity, heating and cooling is very similar both in 2019 and 2020 for all buildings, but in 2020 during the pandemic, the lab center had a reduction of 35% in electricity, compared to last year. An analysis of the energy needed for heating and cooling in the end of June to the end of November was also calculated for operating room 1 and was estimated to 256 kWh/m2 for operation room 1.The machine learning algorithms perform very well to predict the energy consumption of case buildings, Random Forest and AdaBoost proves as the best models, with less than 10% margin of error, some of the models have only 4% error.An analysis of the effect of humidification of ventilation air on energy consumption in operating room 1 was also carried out. The impact on energy consumption were high in winter and will at the coldest periods be able to double the energy consumption needed in the ventilation.