The use of biochar as an adsorbent for wastewater treatment purposes has been hindered due to its lower surface area compared to activated carbon. Current research on increasing surface functional groups on biochar surfaces to improve its adsorption performance suggests using high chemical concentration and long period of modification. This study solves these problems by focusing on improving surface functionalities of biochar via the hydrothermal functionalization process. Oil palm empty fruit bunch biochar was functionalized using autoclave with nitric acid as the functionalization agent. Functionalized biochar properties such as Brunauer–Emmett–Teller (BET) surface area and surface functional groups were analyzed and compared with untreated biochar. Fourier Transform Infrared (FTIR) spectroscopic analysis shows a significant increase in absorption by oxygen functional groups and is corroborated with energy dispersive X-ray (EDX) analysis. The process does not result in any major change in surface morphology and reduction in surface area value. Methylene blue (MB) adsorption test shows 7 times increase in adsorption performance. These results show that the simple hydrothermal functionalization process successfully functionalizes the biochar surface and improves its performance without affecting its surface area at lower concentration, and shorter time compared to previous studies. This result, with future large-scale experimentation using real-life equipment in palm oil mills, would provide a better technology that can be implemented in the industry.
In this study, a novel idea was proposed to convert the polyethylene terephthalate (PET) waste drinking-water bottles into activated carbon (AC) to use for waste cooking oil (WCO) and palm fatty acid distillate (PFAD) feasibility to convert into esters. The acidic and basic char were prepared by using the waste PET bottles. The physiochemical properties were determined by employing various analytical techniques, such as field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR), Brunauer–Emmett–Teller (BET) and temperature-programmed desorption – ammonia/carbon dioxide (TPD-NH3/CO2). The prepared PET H3PO4 and PET KOH showed the higher surface area, thus illustrating that the surface of both materials has enough space for impregnation of foreign precursors. The TPD-NH3 and TPD-CO2 results depicted that PET H3PO4 is found to have higher acidity, i.e., 18.17 mmolg−1, due to the attachment of phosponyl groups to it during pretreatment, whereas, in the case of PET KOH, the basicity increases to 13.49 mmolg−1. The conversion results show that prepared materials can be used as a support for an acidic and basic catalyst for the conversion of WCO and PFAD into green fuel.
14 November 2023 in Biomass Conversion and Biorefinery