Fine-blanking is a molding process based on the common blanking process, which obtains hydrostatic stress through blank holder reverse jacking, in order to increase material plasticity. It requires special equipment, namely a fine-blanking press, to complete the fine-blanking process. In this paper, the problem of the speed of the slide block fluctuation found in the actual use of a 12,000 kN hydraulic fine-blanking press after multi-stage pressure source optimization is studied. Firstly, the mathematical model of the motion of the slide block in the blanking stage of the hydraulic fine blanking press is established, and the accurate mathematical model in the blanking stage of the hydraulic fine-blanking press is obtained through the least square method system identification experiment. Aiming at the complex working situation of the fine-blanking press, a phased PID control strategy is creatively proposed. The optimal PID control parameters are obtained by a genetic algorithm, and established a fuzzy PID controller for the blanking stage to accurately control the movement speed of the slide block. The results show that the new control strategy is very effective in improving the movement accuracy of the slide block, effectively improving the machining accuracy and reducing the impact vibration of the hydraulic system.
29 May 2024 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
The fine blanking process has the highest forming accuracy in the field of metal forming and its production volume has increased sharply. However, hydraulic fine blanking presses (HFBP) – the core equipment of the fine blanking process, have suffered from significant energy loss due to the inefficient hydraulic system. To enhance the energy efficiency of the hydraulic system, this study introduced a novel approach – a multi-stage pressure source system comprised of distinct pump-accumulator groups, each operating at varied supplied pressures to narrow the mismatch of the installed and demanded power. This adaptive system is capable of automatic adjustments to align with the required pressure, thereby mitigating energy losses while concurrently preserving superior dynamic working performance. First, this study commenced with a theoretical analysis of the system configuration and energy characteristics of HFBP. Subsequently, a comprehensive exploration into the inherent inefficiencies of the hydraulic system is undertaken by formulating a precise energy consumption model. Finally, a novel energy-saving optimization design was carried out on the fast-approaching subsystem. The results demonstrated that the implementation of the proposed system led to a notable reduction of 76.87% in energy loss within the flow-regulating module, and an overall diminution of 13.53% in energy dissipation compared to the conventional system. This study will significantly advance sustainable manufacturing practices within the metal-forming domain by reducing electricity consumption and production cost.
The fine-blanking process as an advanced sheet metal forming process has been widely applied in the industrial area. However, special designed equipment is required for this process. In this paper, a novel mechanical servo high speed fine-blanking press with the capacity of 3200kN is proposed, and the vibration control for this machine is researched to achieve the requirement of fine-blanked parts of high dimensional accuracy, since the vibration of the fine-blanking machine will cause the machining displacement error and reduce the machining accuracy. The self-adaptive feed forward control is used to simulate the active vibration control of the mechanical fine-blanking machine. The vibration control principle of the fine-blanking machine is described and the control algorithm is established. At the same time, the vibration mechanical model of the fine-blanking machine as the controlled object is established, and the parameters of the excitation input and the mechanical model are obtained by the fine-blanking finite element simulation and the experiments of the vibration measurement of the press. Finally, the numerical simulation and analysis of active vibration control based on Matlab are carried out. The results show that the control effect is good, and the vibration response is effectively reduced.