Flood dynamics of large lake floodplain systems are typically complex. This paper analyses the characteristics and factors that influence the hysteresis of water area–stage curves for Poyang Lake, the largest freshwater lake in China characterized by complex geomorphology and upstream–downstream exchange conditions. For this purpose, a two-dimensional hydrodynamic model (EFDC) based on seven scenarios is established. The results indicate that the area–stage curve presents significant hysteretic characteristics due to different water surface gradients that emerge during the water-rising and water-falling periods. Counter-clockwise, clockwise, and splayed hysteresis directions observed at the northern, southern, and central hydrometric stations, respectively, are found in Poyang Lake for the first time. Upstream catchment inflows and Hukou stage reflecting the downstream condition are the main factors that influence hysteresis. The temporal fluctuation of catchment inflows and Hukou stage has a remarkably positive impact on hysteresis, namely, an increase in fluctuation brings about a larger hysteresis. The effects of magnitude change in the two factors on hysteresis are opposing. Catchment inflows are positively related, while the decline of the Hukou stage will produce a more pronounced hysteresis. The outcomes of this study will benefit the water management of Poyang Lake and other similar large lakes.

In this paper, a soft fiber Bragg grating (FBG) strain sensor was constructed of a rubber strip, FBGs and steel plates, which exhibits the advantages of high precision and a small size. A series of FBGs was uniformly pasted on a flexible rubber strip which can monitor the slope deformation by measuring the bending deformation of the rubber strip. Most notably, this sensor can be used to monitor horizontal displacement in the subsurface of the slope model. The relationships among the bending angle of the rubber strip, the strain of the rubber strip, and the subsurface deformation of the slope model were established. In addition, the subsurface deformation of the slope model can be obtained by the FBG strain sensor monitoring. Since a rigid-flexible structure was formed by uniformly pasting a series of steel plates on the other side of the rubber strip, the sensitivity of the FBG strain sensor was improved to be 1.5425 nm/°. The measurement results verify that the FBG strain sensor shows good performance, and the model test results demonstrate that the FBG strain sensor can be used for monitoring the subsurface deformation of the slope model.

A highly integrated sensing technology, combining a stimulated Brillouin scattering-based distributed sensor with XFG (fiber Bragg grating (FBG) and long-period fiber grating (LPFG)) sensors on a single fiber, is proposed for the simultaneous measurement of fully distributed and multiple discrete dynamic strains/temperatures. A multiparameter monitoring scheme for slope safety is developed using this integrated sensing technology. An indoor simulation test is carried out to verify its ability to simultaneously monitor a slope’s surface displacement, an anchor reinforcement’s axial force, and rockfall vibration. The experimental results show that distributed static strain and discrete dynamic strain can be well-measured simultaneously with little interference. The results also demonstrate the XFG sensors’ capability for multi-type and multipoint multiplexing. In addition, the proposed hybrid sensor system has potential for the monitoring of multiple slope parameters simultaneously.