Third-generation solar cells, including dye-sensitized solar cells (DSSCs) and quantum dot-sensitized solar cells (QDSSCs), have been associated with low-cost material requirements, simple fabrication processes, and mechanical robustness. Hence, counter electrodes (CEs) are a critical component for the functionality of these solar cells. Although platinum (Pt)-based CEs have been dominant in CE fabrication, they are costly and have limited market availability. Therefore, it is important to find alternative materials to overcome these issues. Transition metal chalcogenides (TMCs) and transition metal dichalcogenides (TMDs) have demonstrated capabilities as a more cost-effective alternative to Pt materials. This advantage has been attributed to their strong electrocatalytic activity, excellent thermal stability, tunability of bandgap energies, and variable crystalline morphologies. In this study, a comprehensive review of the major components and working principles of the DSSC and QDSSC are presented. In developing CEs for DSSCs and QDSSCs, various TMS materials synthesized through several techniques are thoroughly reviewed. The performance efficiencies of DSSCs and QDSSCs resulting from TMS-based CEs are subjected to in-depth comparative analysis with Pt-based CEs. Thus, the power conversion efficiency (PCE), fill factor (FF), short circuit current density (Jsc) and open circuit voltage (Voc) are investigated. Based on this review, the PCEs for DSSCs and QDSSCs are found to range from 5.37 to 9.80% (I−/I3− redox couple electrolyte) and 1.62 to 6.70% (S−2/Sx− electrolyte). This review seeks to navigate the future direction of TMS-based CEs towards the performance efficiency improvement of DSSCs and QDSSCs in the most cost-effective and environmentally friendly manner.
8 March 2026 in Journal of Materials Science: Materials in Electronics
This study evaluates the adhesion properties of nickel sulphide reduced graphene oxide, NiS/rGO nanocomposites used as counter electrodes (CEs) in quantum dot-sensitized solar cells (QDSSCs). Using a scratch test based on ASTM D3359-17 standards, adhesion was assessed on untreated and pre-treated fluorine-doped tin oxide (FTO) substrates. The research findings reveal that pre-treated FTO substrates significantly improve adhesion strength, with NiS/rGO-15h samples demonstrating superior stability. This research emphasizes the importance of substrate pre-treatment and synthesis parameters to enhance nanocomposite durability and performance under various conditions.