Tuty Asma Abu Bakar

Tuty Asma Abu Bakar


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 April 2023 in Materials
Verified
Journal Article
Open access
PDF file
layla kharbootlayla kharboot
layla kharboot
NOR AKMAL FADILNOR AKMAL FADIL
NOR AKMAL FADIL
TBTuty Asma Abu Bakar
Tuty Asma Abu Bakar
ANAbdillah Sani Mohd Najib
Abdillah Sani Mohd Najib
NNNorhuda Hidayah Nordin
Norhuda Hidayah Nordin
HGHabibah Ghazali
Habibah Ghazali
Third-generation solar cells, including dye-sensitized solar cells (DSSCs) and quantum dot-sensitized solar cells (QDSSCs), have been associated with low-cost material requirements, simple fabrication processes, and mechanical robustness. Hence, counter electrodes (CEs) are a critical component for the functionality of these solar cells. Although platinum (Pt)-based CEs have been dominant in CE fabrication, they are costly and have limited market availability. Therefore, it is important to find alternative materials to overcome these issues. Transition metal chalcogenides (TMCs) and transition metal dichalcogenides (TMDs) have demonstrated capabilities as a more cost-effective alternative to Pt materials. This advantage has been attributed to their strong electrocatalytic activity, excellent thermal stability, tunability of bandgap energies, and variable crystalline morphologies. In this study, a comprehensive review of the major components and working principles of the DSSC and QDSSC are presented. In developing CEs for DSSCs and QDSSCs, various TMS materials synthesized through several techniques are thoroughly reviewed. The performance efficiencies of DSSCs and QDSSCs resulting from TMS-based CEs are subjected to in-depth comparative analysis with Pt-based CEs. Thus, the power conversion efficiency (PCE), fill factor (FF), short circuit current density (Jsc) and open circuit voltage (Voc) are investigated. Based on this review, the PCEs for DSSCs and QDSSCs are found to range from 5.37 to 9.80% (I−/I3− redox couple electrolyte) and 1.62 to 6.70% (S−2/Sx− electrolyte). This review seeks to navigate the future direction of TMS-based CEs towards the performance efficiency improvement of DSSCs and QDSSCs in the most cost-effective and environmentally friendly manner.

29 March 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HGHamidreza Ghandvar
Hamidreza Ghandvar
Mostafa Abbas JabbarMostafa Abbas Jabbar
Mostafa Abbas Jabbar
Seyed Saeid Rahimian KoloorSeyed Saeid Rahimian Koloor
Seyed Saeid Rahimian Koloor
Michal PetrůMichal Petrů
Michal Petrů
Abdollah BahadorAbdollah Bahador
Abdollah Bahador
Katsuyohi KondohKatsuyohi Kondoh
Katsuyohi Kondoh
In the current study, the effect of different B4C additions (0, 2.5, 5, and 10 wt%) on the microstructural, solidification behavior, mechanical, and tribological properties of Al-20%Mg2Si composite were studied by means of scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Vickers hardness, tensile, and dry sliding wear tests. The cooling curve thermal analysis (CCTA) approach was utilized to monitor the influence of B4C particles on the solidification behavior of Al-20%Mg2Si composite. The results revealed that the addition of B4C particles up to 10 wt% reduced the nucleation temperature (TN) and growth temperature (TG) of the primary Mg2Si phase. Moreover, the proper amount of B4C added to Al-20%Mg2Si composite has a significant effect on the microstructural alteration, mechanical, and tribological properties of the composite. The mean size of primary Mg2Si in Al-Mg2Si composite was 47 μm, in which with the addition of 5 wt% B4C, the particle size decreased to 33 μm. The highest UTS (217 MPa) and El% (7%) was achieved in Al-20%Mg2Si-5%B4C hybrid composite. The cast Al-20%Mg2Si composite revealed the brittle mode of fracture with some cleavage characterization, in which with the addition of 5%B4C, the fracture mode altered to a more ductile fracture. The wear results revealed that the Al-20%Mg2Si-5%B4C hybrid composite has the highest wear resistance with the lowest wear rate (0.46 mm3/Km) and friction coefficient (µ = 0.52) under 20 N applied load compared to other fabricated composites with mild abrasion as the governed wear mechanism.

15 November 2024 in International Journal of Automotive and Mechanical Engineering
Verified
Journal Article
Open access
PDF file
MHMudassar Hussain
Mudassar Hussain
ANAbdillah Sani Mohd Najib
Abdillah Sani Mohd Najib
NFNor Akmal Fadil
Nor Akmal Fadil
TBTuty Asma Abu Bakar
Tuty Asma Abu Bakar
Novel equimolar AlCoCrFeNi high entropy alloy (HEA), as a promising candidate for demanding engineering applications has recently received considerable attention due to its random solid solution structure. It confers its synergy of high strength, ductility, high-temperature structure stability and corrosion resistance. Thermally assisted spinodal dissolution from BCC random solid solution (B1) to ordered BCC (B2) and precipitation of brittle σ-phase renders its ability to undergo as an alloy for thermomechanical processing. Therefore, it was necessary to manifest σ-phase nucleation and growth from homogenization temperature (1250oC) at different cooling rates, i.e., furnace cooled and water quenched along with variation in σ-phase crystallite size at transformation temperature (800oC) in Fibonacci time frame (1h, 2h, 4h, 8h, and 16h) to know hot working temperature range and post treatment. An equimolar AlCoCrFeNi high-entropy alloy fabricated via vacuum induction melting was subjected to ICP-MS and XRD analysis to confirm its chemical composition and crystal structure distribution. The XRD results were further analyzed by using Scherrer’s equation and Williamsons-Hall plot to calculate the crystallite size of σ-phase and its associated microstrain. The work aimed to determine the σ-phase reversibility from homogenization temperature 1250oC and crystallite size growth at transformation temperature (800oC) to reveal the importance of thermomechanical processing parameters of equimolar AlCoCrFeNi HEA. In the present study, remarkable retention of the FCC phase was witnessed during furnace cooling and its traces appeared during rapid cooling. The vital phenomenon of FCC-phase nucleation signifies the key importance of the transformation zone, revealing its effect on the post-treatment cooling rate. However, its coupled phenomenon of the tetragonal σ-phase formation remained suppressed during cooling from homogenization temperature (1250οC). It determined the wide hot workability range of equimolar AlCoCrFeNi HEA to make it a suitable candidate for bulk engineering applications.

11 November 2021 in Materials
Verified
Journal Article
Open access
PDF file
NOR AKMAL FADILNOR AKMAL FADIL
NOR AKMAL FADIL
SYSiti Zahira Yusof
Siti Zahira Yusof
TBTuty Asma Abu Bakar
Tuty Asma Abu Bakar
HGHabibah Ghazali
Habibah Ghazali
MYMuhamad Azizi Mat Yajid
Muhamad Azizi Mat Yajid
AOAli Ourdjini
Ali Ourdjini
Since the use of the most stable Pb-based materials in the electronic industry has been banned due to human health concerns, numerous research studies have focused on Pb-free materials such as pure tin and its alloys for electronic applications. Pure tin, however, suffers from tin whiskers’ formation, which tends to endanger the efficiency of electronic circuits, and even worse, may cause short circuits to the electronic components. This research aims to investigate the effects of stress on tin whiskers’ formation and growth and the mitigation method for the immersion of the tin surface’s finish deposited on a copper substrate. The coated surface was subjected to external stress by micro-hardness indenters with a 2N load in order to simulate external stress applied to the coating layer, prior to storage in the humidity chamber with environmental conditions of 30 °C/60% RH up to 52 weeks. A nickel underlayer was deposited between the tin surface finish and copper substrate to mitigate the formation and growth of tin whiskers. FESEM was used to observe the whiskers and EDX was used for measuring the chemical composition of the surface finish, tin whiskers, and oxides formed after a certain period of storage. An image analyzer was used to measure the whiskers’ length using the JEDEC Standard (JESD22-A121A). The results showed that the tin whiskers increased directly proportional to the storage time, and they formed and grew longer on the thicker tin coating (2.3 μm) than the thin coating (1.5 μm). This is due to greater internal stress being generated by the thicker intermetallic compounds identified as the Cu5Sn6 phase, formed on a thicker tin coating. In addition, the formation and growth of CuO flowers on the 1.5 μm-thick tin coating suppressed the growth of tin whiskers. However, the addition of external stress by an indentation on the tin coating surface showed that the tin whiskers’ growth discontinued after week 4 in the indented area. Instead, the whiskers that formed were greater and longer at a distance farther from the indented area due to Sn atom migration from a high stress concentration to a lower stress concentration. Nonetheless, the length of the whisker for the indented surface was shorter than the non-indented surface because the whiskers’ growth was suppressed by the formation of CuO flowers. On the other hand, a nickel underlayer successfully mitigated the formation of tin whiskers upon the immersion of a tin surface finish.

Verified
Journal Article
Open access
PDF file
HGHamidreza Ghandvar
Hamidreza Ghandvar
Mostafa Abbas JabbarMostafa Abbas Jabbar
Mostafa Abbas Jabbar
Michal PetrůMichal Petrů
Michal Petrů
TBTuty Asma Abu Bakar
Tuty Asma Abu Bakar
LLLim Jia Ler
Lim Jia Ler
Seyed Saeid Rahimian KoloorSeyed Saeid Rahimian Koloor
Seyed Saeid Rahimian Koloor
This study aims to investigate the microstructural alterations, mechanical properties, sliding wear behavior, and corrosion properties of Al-15%Mg2Si composites with different contents of yttria-stabilized zirconia (YSZ). Al-15%Mg2Si composites with the different contents of YSZ (0, 3, 6, and 9 wt.%) were fabricated using the stir-casting technique. The fabricated composites were characterized by means of optical microscopy (OM), scanning electron microscopy (SEM) equipped with energy-dispersive spectroscopy (EDS), Vickers hardness tester, linear reciprocating tribometer (LRT), and electrochemical test. The results showed that with the introduction of YSZ particles, the average size of the primary Mg2Si particles in the base composite was 137.78 µm, which was reduced to 88.36 µm after adding 9 wt.% YSZ. The aspect ratio of Mg2Si particles also decreased from 3, for the base composite, to 1.27 in the composite containing 9 wt.% YSZ. Moreover, the hardness value displays an incremental trend from 102.72 HV, as recorded for the base in situ composite, to 126.44 HV in the composite with 9 wt.% YSZ. On top of that, the Al-15%Mg2Si-9%YSZ demonstrates exceptional wear resistance, with the lowest wear rate of 0.46 mm3/km under a 25 N applied load. Its average coefficient of friction (COF) was recorded at 0.42, which is lower than both the 3 and 6 wt.% of YSZ-containing composites. The smoother worn surface in Al-15%Mg2Si-9%YSZ hybrid composite implies the abrasion phenomenon, as dominant wear behavior is milder than the other fabricated composites. On top of that, the Al-15%Mg2Si-9%YSZ also possesses optimum corrosion resistance. The corrosion rate is 0.080 mmpy, comparable to the 0.164 mmpy rate obtained in the in situ composite.

7 November 2025 in Journal of Materials Engineering and Performance
Verified
Journal Article
Closed access
PDF file
AAAli M. H. Altameemi
Ali M. H. Altameemi
TBTuty Asma Abu Bakar
Tuty Asma Abu Bakar
Saeed FarahanySaeed Farahany
Saeed Farahany
MSMohd Ayub Sulong
Mohd Ayub Sulong
HGHamidreza Ghandvar
Hamidreza Ghandvar