In this paper, two types of lightweight porous concrete material, expanded polystyrene concrete (EPSC) and ceramics-cement based porous material (CCPM) have been prepared on the base of C60 concrete. The dynamic mechanical experiments of lightweight porous concretes have been carried out by Φ 100 mm split Hopkinson pressure bar (SHPB) improved by wave shaping technology. The dynamic properties, including strength properties, deformation properties, impact toughness and energy absorption properties, of lightweight porous concretes have been analyzed comparatively, and its application prospects have been discussed. The results show that the two types of lightweight porous concretes are strain rate sensitive. Dynamic compression strength increases with strain rate; the correlation between the peak strain, ultimate strain of lightweight porous concrete and strain rate can be expressed by quadratic polynomial; under the impact loading, the impact toughness of lightweight porous concretes increases with strain rate, the amount of absorbed energy increases with the average incident energy change rate, moreover, the relation between the impact toughness and strain rate, and that between the amount of absorbed energy and the average incident energy change rate can both be expressed by exponential functions; compared with EPSC, CCPM has better properties in terms of strength, deformation, impact toughness and energy absorption. Those advantages are more obvious with high strain rate. Therefore, CCPM has more vast application prospects in civil defense projects than EPSC.
The microwave deicing method is one of the non-contact deicing methods. As compared to the traditional deicing methods, microwave deicing method has a higher energy utilization ratio and a better deicing effect. Moreover, less influence on the environment is also an advantage of this method. In this study, 5%, 10%, and 15% graphite was added to concrete as a wave absorbing material to modify the absorbing abilities of concrete. Then, the deicing efficiency of microwave towards the graphite-modified concrete (GMC) covered by an ice layer was investigated via analyzing the variations in the temperature-rising rate, ice layer destruction process, and effective deicing area. The results indicate that the addition of graphite obviously improves the microwave deicing efficiency. For the 15% graphite addition, the temperature-rising rate is 2.5 times that of the plain concrete, and the effective deicing area is 2.2 times that of the plain concrete. The time when the effective deicing area appears reduces 40 s for the graphite addition of 15%. Therefore, addition of graphite to concrete for modifying the microwave absorbing abilities of concrete is a feasible and effective way.
Microwave deicing is an intelligent and environmentally friendly method that overcomes the many shortfalls of traditional deicing methods, including mechanical, chemical and thermal techniques.
1 September 2017 in Journal of Materials in Civil Engineering
This paper aims to develop a new material with outstanding energy-absorbing performance regarding its application in protection engineering. The preparation and dynamic performance of basalt fiber–reinforced lightweight concrete confined by a brass strip (FLCB) were experimentally investigated. The FLCB specimens were first prepared based on dense packing theory. Impact compression experiments were then carried out by a ( = diameter) split Hopkinson pressure bar apparatus, which was improved by the pulse-shaping technique. The resulting stress-strain curve, dynamic deformation, and energy-absorbing characteristics were studied. The results show that FLCB, with density of , is a kind of lightweight concrete. The stress-strain curve of FLCB can be divided into three stages: linear elastic, stress platform, and brittle failure. The stress platform stage has a significant effect on the improvement of energy-absorbing performance, and the percentage of the stress platform to the whole curve increases continuously with average strain rate. Both the ultimate strain and the energy-absorbing index are sensitive to strain rate and increase continuously with average strain rate. Furthermore, compared with conventional concrete, the production of FLCB is associated with a higher ultimate strain and energy-absorbing index, and the tendency becomes more obvious with increasing average strain rate. Therefore, FLCB includes a lightweight concrete with excellent energy-absorbing performance and this performance shows clear strain-rate dependence. Due to its features of outstanding energy absorption and low density, FLCB has a promising future to be used as antiexplosive layers in protection engineering.
7 April 2022 in International Journal of Pavement Research and Technology