18 April 2018 in RSC Advances
In this paper, two types of lightweight porous concrete material, expanded polystyrene concrete (EPSC) and ceramics-cement based porous material (CCPM) have been prepared on the base of C60 concrete. The dynamic mechanical experiments of lightweight porous concretes have been carried out by Φ 100 mm split Hopkinson pressure bar (SHPB) improved by wave shaping technology. The dynamic properties, including strength properties, deformation properties, impact toughness and energy absorption properties, of lightweight porous concretes have been analyzed comparatively, and its application prospects have been discussed. The results show that the two types of lightweight porous concretes are strain rate sensitive. Dynamic compression strength increases with strain rate; the correlation between the peak strain, ultimate strain of lightweight porous concrete and strain rate can be expressed by quadratic polynomial; under the impact loading, the impact toughness of lightweight porous concretes increases with strain rate, the amount of absorbed energy increases with the average incident energy change rate, moreover, the relation between the impact toughness and strain rate, and that between the amount of absorbed energy and the average incident energy change rate can both be expressed by exponential functions; compared with EPSC, CCPM has better properties in terms of strength, deformation, impact toughness and energy absorption. Those advantages are more obvious with high strain rate. Therefore, CCPM has more vast application prospects in civil defense projects than EPSC.
1 September 2017 in Journal of Materials in Civil Engineering
This paper aims to develop a new material with outstanding energy-absorbing performance regarding its application in protection engineering. The preparation and dynamic performance of basalt fiber–reinforced lightweight concrete confined by a brass strip (FLCB) were experimentally investigated. The FLCB specimens were first prepared based on dense packing theory. Impact compression experiments were then carried out by a ( = diameter) split Hopkinson pressure bar apparatus, which was improved by the pulse-shaping technique. The resulting stress-strain curve, dynamic deformation, and energy-absorbing characteristics were studied. The results show that FLCB, with density of , is a kind of lightweight concrete. The stress-strain curve of FLCB can be divided into three stages: linear elastic, stress platform, and brittle failure. The stress platform stage has a significant effect on the improvement of energy-absorbing performance, and the percentage of the stress platform to the whole curve increases continuously with average strain rate. Both the ultimate strain and the energy-absorbing index are sensitive to strain rate and increase continuously with average strain rate. Furthermore, compared with conventional concrete, the production of FLCB is associated with a higher ultimate strain and energy-absorbing index, and the tendency becomes more obvious with increasing average strain rate. Therefore, FLCB includes a lightweight concrete with excellent energy-absorbing performance and this performance shows clear strain-rate dependence. Due to its features of outstanding energy absorption and low density, FLCB has a promising future to be used as antiexplosive layers in protection engineering.
27 April 2017 in RSC Advances
This paper aims to study the effect of brass strip wrapping on the dynamic performance of basalt fiber reinforced porous expanded polystyrene-ceramsite concrete (BECC). The specimens of BECC-B were prepared by wrapping those of BECC with brass strips. A Φ 100 mm split Hopkinson pressure bar (SHPB) apparatus was used to conduct dynamic experiments. The stress–strain curves of BECC and BECC-B were systematically analyzed. The mechanical properties, including strength properties, deformation properties and failure patterns were studied. Based on these, the energy absorbing properties were explored. The results show that the stress–strain curves have three periods: an elastic period, plateau period and declining period. Moreover, the plateau period of BECC-B is more obvious than that of BECC. The mechanical properties of BECC-B are more sensitive to strain rate than those of BECC. Analysis of the energy absorbing properties indicates that the specimens of BECC-B can absorb much more energy than those of BECC under the same strain rate. To sum up, BECC-B is a promising energy absorbing material, which can be used as the distribution layers in defensive engineering.
1 June 2018 in Journal of Materials in Civil Engineering
The aim of this paper was to study the mechanical properties and damage evolution of concrete added with hollow sphere (AHSC) under impact loading. The impact compression experiments were carried out by a 100-mm-diameter split Hopkinson pressure bar apparatus. The mechanical performance, including strength, deformation and failure pattern, were analyzed. The damage factor ( ) was defined as the dissipation of concrete constitutive energy and the damage evolution was explored. The results show that the evolution of AHSC dynamic stress fell into four stages: elastic stage, plateau stage, densification stage, and failure stage. The plateau stage, which did not exist in the dynamic stress-strain curves of plain concrete (PC), could help AHSC better absorb energy under impact loading. Along with the increase of strain rate, the dynamic strength increase factors (DIF) of both AHSC and PC increased continuously. Furthermore, the DIF of AHSC was larger than that of PC at the same strain rate. Moreover, the critical strain shared the same law with DIF, indicating that the addition of hollow sphere could improve the deformation property of concrete. The analysis of failure patterns of specimens indicated that the damage degree got higher with the increasing strain rate, and AHSC was more seriously damaged than PC at the same strain rate. On the basis of the increasing rate of , the dynamic damage evolution could be divided into three periods. There was a jumping period in the damage evolution curve of AHSC, and this phenomenon became more obvious with the increase of strain rate.