Wireless and fully energetically passive corrosion sensors inspired from the chipless Radio-Frequency IDentification (RFID) technology are presented for the monitoring of degradation of infrastructures located in coastal zones and underwater environments. The device consists of a reader and a remote passive sensor. This study presents two radio-frequency (RF) corrosion-sensitive resonators that can be integrated in such a device. The first is sensitive to a loss of metal due to its degradation, and the second is sensitive to the corrosion potential of metals, with respect to a reference electrode. The RF characterization of these two resonators demonstrates unambiguously the sensitivity of the method to corrosion of metal, passivation of steel as well as degradation of organic coatings. Then, their integration in a demonstrator including antennas is considered. The main parameters that influence the RF wave propagation and thus the reading distance are discussed. Following the presented results, the proposed method is considered as a reliable and versatile tool which should be able to be deployed in immersed, tidal, and splash zones, for example, for offshore facilities monitoring.
1 January 2015 in Journal of Electroanalytical Chemistry
In this study, the use of electrical resistance (ER) sensors to monitor the corrosion of Al94Cu6 alloy is assessed and compared with 2024‐T3 coupons. Under uniform corrosion, a good correlation was found between the ER sensors and mass loss on coupons. Three different chloride depositions are studied: (i) pre‐contamination with dry/wet cycles, (ii) Volvo standard accelerated corrosion test and (iii) neutral salt spray test. The obtained results show good reproducibility of the ER sensors under all tested conditions. This suggests that ER sensors more levelled the effect of localised corrosion through a large surface evaluation compared with cross‐sections. The corrosion thickness obtained with the ER sensors does not correspond to the mean depth obtained by cross‐sections. This can be explained by the distribution and size of the localised corrosion events according to a finite element model proposed. The ER method allows obtaining useful real‐time corrosion data for the understanding of the corrosion mechanisms and the development of accelerated tests. The chloride concentration, the frequency of salt application and wet/dry cycles have a strong influence on the corrosion rate of aluminium alloys.