Load modeling has significant impact on power system studies. This paper presents a review on load modeling and identification techniques. Load models can be classified into two broad categories: 1) static and 2) dynamic models, while there are two types of approaches to identify model parameters: 1) measurement-based and 2) component-based. Load modeling has received more attention in recent years because of the renewable integration, demand-side management, and smart metering devices. However, the commonly used load models are outdated, and cannot represent emerging loads. There is a need to systematically review existing load modeling techniques and suggest future research directions to meet the increasing interests from industry and academia. In this paper, we provide a thorough survey on the academic research progress and industry practices, and highlight existing issues and new trends in load modeling.

Under the increasing penetration of distributed energy resources and new smart network technologies, distribution utilities face new challenges and opportunities to ensure reliable operations, manage service quality, and reduce operational and investment costs. Simultaneously, the research community is developing algorithms for advanced controls and distribution automation that can help to address some of these challenges. However, there is a shortage of realistic test systems that are publically available for development, testing, and evaluation of such new algorithms. Concerns around revealing critical infrastructure details and customer privacy have severely limited the number of actual networks published and that are available for testing. In recent decades, several distribution test feeders and US-featured representative networks have been published, but the scale, complexity, and control data vary widely. This paper presents a first-of-a-kind structured literature review of published distribution test networks with a special emphasis on classifying their main characteristics and identifying the types of studies for which they have been used. This both aids researchers in choosing suitable test networks for their needs and highlights the opportunities and directions for further test system development. In particular, we highlight the need for building large-scale synthetic networks to overcome the identified drawbacks of current distribution test feeders.

This paper demonstrates the potential of inverter-based loads to support grid reliability during power system transients thereby enabling reliable integration of renewable energy in power systems. Such loads are referred to in this paper as grid-supportive loads (GSLs). A new GSL model is developed that simulates the transient response capabilities that can be programmed in electronic loads. The model’s design enables it to be easily integrated in widely used commercial power system transient analysis software. Theoretical expressions are derived that explain the workings of the GSL model. The performance, numerical stability, and impact of the GSL model is validated on 9-bus and 2000-bus synthetic power system models using generator tripping and bus fault disturbances. Results on the 2000 bus system show that in the absence of frequency support from wind/solar generation resources, just 20% of loads with grid-supportive capabilities can improve frequency response by up to 2000 MW/0.1 Hz and reduce deviation in frequency at nadir by up to 60% compared to the situation when GSLs are absent. Power system reliability also improves under fault events. It is further shown that GSLs can aid in integrating more renewable generation without degrading the overall transient response of the power system.

Electric power systems worldwide are undergoing a foundational transition from mechanical-backed generation technologies dominating the resource mixture, primarily synchronous generators, into a hybrid system consisting of periods of a preponderance of power electronics-backed generation technologies, primarily solar photovoltaics and wind power plants and battery storage systems. Almost all current inverter-based resources integrated into bulk power systems are grid-following technology, and there exists a knowledge gap concerning the impacts of large-scale integration of grid-following inverters on power system dynamics, which is a critical aspect of power system planning and operation. This paper serves as a tutorial and addresses the stability and reliability challenges pertinent to the integration of grid-following interfaced inverter-based resources. While considering both small-signal and large-signal stability problems, it demonstrates and explains the underlying interrelated dynamics of electric angle, frequency, and voltage, as well as the impacts that system inertia can have on system stability. Industry-grade electromagnetic transient simulations in Power Systems Computer-Aided Design (PSCAD) are utilized to demonstrate the concepts presented in this paper, and all the computer models have been made available to the public at no cost.

This paper presents a comprehensive grid impact analysis design and corresponding mitigation strategies for heavy-duty electric vehicle (EV) charging stations. The charging load of heavy-duty charging station can reach several megawatts, which could induce adverse impacts on the distribution grid if not effectively mitigated. To analyze the impacts and provide corresponding solutions, we select four representative distribution systems—including both single-feeder cases and a multi-feeder case—and design thorough test metrics for the impact analysis. The charging load profiles used in the analysis are derived from realistic conventional heavy-duty vehicle travel data. Based on the analysis results, charging stations are placed at three different representative locations in each distribution system: best, good, and worst locations. Mitigation strategies using a combination of smart charger functionality, on-site photovoltaic (PV) generation, and on-site energy storage (ES) are proposed and tested. A sizing method is also proposed to find the optimal PV-ES-charger capacity that minimizes the capital cost.

Integrated transmission-and-distribution (T&D) modeling is a new and developing method for simulating power systems. Interest in integrated T&D modeling is driven by the changes taking place in power systems worldwide that are resulting in more decentralized power systems with increasingly high levels of distributed energy resources. Additionally, the increasing role of the hitherto passive energy consumer in the management and operation of power systems requires more capable and detailed integrated T&D modeling to understand the interactions between T&D systems. Although integrated T&D modeling has not yet found widespread commercial application, its potential for changing the decades-old power system modeling approaches has led to several research efforts in the last few years that tried to (i) develop algorithms and software for steady-state and dynamic modeling of power systems and (ii) demonstrate the advantages of this modeling approach compared with traditional, separated T&D system modeling. In this paper, we provide a review of integrated T&D modeling research efforts and the methods employed for steady-state and dynamic modeling of power systems. We also discuss our current research in integrated T&D modeling and the potential directions for future research. This paper should be useful for power systems researchers and industry members because it will provide them with a critical summary of current research efforts and the potential topics where research efforts are needed to further advance and demonstrate the utility of integrated T&D modeling.