Yuwei Fan

Yuwei Fan


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 November 2007 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
YFYuwei Fan
Yuwei Fan
HZHui-Huang Zhong
Hui-Huang Zhong
ZLZhi-Qiang Li
Zhi-Qiang Li
TSTing Shu
Ting Shu
JZJian-De Zhang
Jian-De Zhang
LLLing Luo
Ling Luo
In order to increase the power conversion efficiency of a magnetically insulated line oscillator (MILO), an axially extracted virtual cathode oscillator (VCO) is introduced to utilize the load current in the MILO, so it is called the MILO-VCO. In this device, the MILO and VCO are operated synchronously and generate high-power microwaves. The MILO-VCO is investigated in detail with particle-in-cell (PIC) methods (KARAT code). In simulation, the diode voltage is 640 kV and the current is 50 kA. The total peak power of the MILO-VCO is 5.22 GW and the corresponding power conversion efficiency is 16.3% . In the MILO-VCO, the peak power of the MILO is 3.91 GW and its frequency is 1.76 GHz; the peak power of the VCO is 1.33 GW and its frequency is 3.79 GHz.

1 March 2008 in Review of Scientific Instruments
Verified
Journal Article
Closed access
YFYuwei Fan
Yuwei Fan
HZHui-Huang Zhong
Hui-Huang Zhong
ZLZhi-Qiang Li
Zhi-Qiang Li
TSTing Shu
Ting Shu
JZJian-De Zhang
Jian-De Zhang
LLLing Luo
Ling Luo
The improved magnetically insulated transmission line oscillator (MILO) is a gigawatt-class L-band high power microwave tube driven by a 550kV, 57kA, 50ns electron beam. It has allowed us to generate 2.4GW pulse of 22ns duration. The recent progress of the improved MILO is presented in this paper. First, a field shaper cathode is introduced into the improved MILO to avoid the cathode flares in the triple point region. The experimental results show that the cathode flares are avoided, so the lifetime of the velvet cathode is longer than that of the taper cathode. Furthermore, the shot-to-shot reproducibility is better than that of the taper cathode. Second, In order to prolong the pulse duration and increase the radiated microwave power, a self-built 600kV, 10Ω, 80ns pulser: SPARK-03 is employed to drive the improved MILO. Simulation and experimental investigation are performed. In simulation, when the improved MILO is driven by a 600kV, 57kA electron beam, high-power microwave is generated with output power of 4.15GW, frequency of 1.76GHz, and relevant power conversion efficiency of 12.0%. In experiments, when the diode voltage is 550kV and current is 54kA, the measured results are that the radiated microwave power is above 3.1GW, the pulse duration is above 40ns, the microwave frequency is about 1.755GHz, and the power conversion efficiency is about 10.4%.

1 March 2020 in AIP Advances
Verified
Journal Article
Open access
PDF file
ZLZeyang Liu
Zeyang Liu
YFYuwei Fan
Yuwei Fan
XWXiaoyu Wang
Xiaoyu Wang
DSDifu Shi
Difu Shi
ALAnkun Li
Ankun Li
YYYuanqiang Yu
Yuanqiang Yu
Relativistic magnetrons (RMs) are one of the most promising high power microwave devices. A high-efficiency relativistic magnetron (HERM) with a novel all-cavity extraction structure is presented and investigated theoretically and numerically in this paper. Compared with conventional RMs with an all-cavity extraction structure, the HERM has three improved features. First, a single stair is introduced into the HERM. Second, the angular width of the extraction structure is bigger than that of the anode slow-wave structure. Third, the extraction port is set behind the anode vanes in the axial direction instead of being set between two anode vanes. These improved features can enhance the extraction efficiency of the HERM. The typical simulation results are as follows: high-power microwaves of the transverse electromagnetic mode are generated with a peak power of 1.65 GW, a frequency of 1.61 GHz, and a power efficiency of 67.6%, when the voltage is 586 kV and the current is 4.19 kA. The simulation results verify the validity of the novel all-cavity extraction structure.

27 June 2019 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
XWXiaoyu Wang
Xiaoyu Wang
YFYuwei Fan
Yuwei Fan
TSTing Shu
Ting Shu
ALAnkun Li
Ankun Li
YYYuanqiang Yu
Yuanqiang Yu
ZLZeyang Liu
Zeyang Liu
In order to improve power efficiency, a high-efficiency magnetically insulated transmission line oscillator (MILO) with ridge-disk-loaded vanes is proposed in this paper. Theoretical analyses show that slow wave structure (SWS) with ridges can improve the coupling impedance of MILO markedly, which thus increases the power efficiency of MILO. The proposed MILO with ridges is optimized with CHICPIC particle-in-cell code, and the simulation results are consistent with the theoretical results. In simulations, when the applied voltage and input power are 566 kV and 28.4 GW, the output power and maximum electric field of MILO with ridges are 6.0 GW and about 0.61 MV/cm, respectively. Moreover, the corresponding power efficiency reaches up to 21.0%, and the microwave frequency is 1.48 GHz. However, for the MILO without ridges, the output power and the power efficiency are only 5.0 GW and 17.6%, respectively, with the same input voltage and power, and the microwave frequency is 1.53 GHz. Therefore, the power efficiency of MILO with ridges increases by 19% in comparison to MILO without ridges.

10 August 2016 in Journal of Applied Physics
Verified
Journal Article
Closed access
ALAn-Kun Li
An-Kun Li
YFYuwei Fan
Yuwei Fan
The preliminary experimental results of a carbon fiber array cathode for the magnetically insulated transmission line oscillator (MILO) operations are reported. When the diode voltage and diode current were 480 kV and 44 kA, respectively, high-power microwaves with a peak power of about 3 GW and a pulse duration of about 60 ns were obtained in a MILO device with the carbon fiber array cathode. The preliminary experimental results show that the shot-to-shot reproducibility of the diode current and the microwave power is stable until 700 shots. No obvious damage or deterioration can be observed in the carbon fiber surface morphology after 700 shots. Moreover, the cathode performance has no observable deterioration after 700 shots. In conclusion, the maintain-free lifetime of the carbon fiber array cathode is more than 700 shots. In this way, this carbon fiber array cathode offers a potential replacement for the existing velvet cathode.

18 January 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
HXHaodong Xu
Haodong Xu
XWXiao-Yu Wang
Xiao-Yu Wang
ZLZeyang Liu
Zeyang Liu
ALAnkun Li
Ankun Li
YFYuwei Fan
Yuwei Fan
Relativistic magnetron (RM) is a promising high-power microwave (HPM) source and major hotspot in the field of HPM research, whose advantages include high efficiency, low magnetic field, and compact configuration. A ${C}$ -band RM with a novel extraction structure is presented and investigated numerically in this article. Compared with the traditional ${C}$ -band RM with rectangular extraction slots (CRMRS), the ${C}$ -band RM with novel extraction slots (CRMNS) has three advantages. On the one hand, mode competition is suppressed effectually, and so its operation is more stable. On the other hand, the power efficiency is enhanced. Moreover, the power capacity is enhanced, which is advantageous to increase the output power. The typical simulation results are as follows: HPM is generated with a peak power of 2.53 GW at an efficiency of 58% and a frequency of 4.3 GHz, when the voltage is 650 kV, the current is 6.7 kA, and the magnetic field is 0.347 T.