This study demonstrates the possibility of forming 3D structures with enhanced thermal conductivity (k) by vat printing a silicone–acrylate based nanocomposite. Polydimethylsiloxane (PDSM) represent a common silicone-based polymer used in several applications from electronics to microfluidics. Unfortunately, the k value of the polymer is low, so a composite is required to be formed in order to increase its thermal conductivity. Several types of fillers are available to reach this result. In this study, boron nitride (BN) nanoparticles were used to increase the thermal conductivity of a PDMS-like photocurable matrix. A digital light processing (DLP) system was employed to form complex structures. The viscosity of the formulation was firstly investigated; photorheology and attenuate total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) analyses were done to check the reactivity of the system that resulted as suitable for DLP printing. Mechanical and thermal analyses were performed on printed samples through dynamic mechanical thermal analysis (DMTA) and tensile tests, revealing a positive effect of the BN nanoparticles. Morphological characterization was performed by scanning electron microscopy (SEM). Finally, thermal analysis demonstrated that the thermal conductivity of the material was improved, maintaining the possibility of producing 3D printable formulations.
12 April 2021 in Journal of the American Ceramic Society
An extract of polyphenols was obtained from organic red grape pomace, chemically analyzed, and used for functionalization of two bioactive glasses and porous hydroxyapatite. Functionalization is effective on hydroxyapatite and the bioactive glass with higher surface reactivity with a different grafting mechanism. Grafting does not inhibit redox and radical scavenging activity of polyphenols. The grafted polyphenols make a continuous layer with an almost complete surface coverage. Polyphenols are released with different kinetics according to the mechanism of grafting and maintain their redox activity. A homogeneous thin layer of polyphenols is still firmly grafted on both substrates after 28 days of soaking and it still maintains radical scavenging activity. The functionalized samples can be sterilized by gamma irradiation.
Thermal conductivity is a key property in many applications from electronic to informatics. The interaction of fillers with Sylgard 184 was studied; this study explores new composites and the influence of metal particles (copper and nickel), carbon-based materials (carbon nanotubes and carbon black), and ceramic nanoparticles (boron nitride) as fillers to enhance thermal properties of silicon-based composites. The effect of the fillers on the final performances of the composite materials was evaluated. The influence of filler volume, dimension, morphology, and chemical nature is studied. Specifically, FT-IR analysis was used to evaluate curing of the polymer matrix. DSC was used to confirm the data and to further characterize the composites. Thermo-mechanical properties were studied by DMTA. The filler morphology was analyzed by SEM. Finally, thermal conductivity was studied and compared, enlightening the correlation with the features of the fillers. The results demonstrate a remarkable dependence among the type, size, and shape of the filler, and thermal properties of the composite materials. Underlining a that the volume filler influenced the thermal conductivity obtaining the best results with the highest added volume filler and higher positive impact on the k of the composites is reached with large particles and with irregular shapes. In contrast, the increase of filler amount affects the rigidity of the silicon-matrix, increasing the rigidity of the silicon-based composites.
The study aimed to identify an effective mechanism of adsorption of polyphenols on a nano-textured Ti surface and to evaluate the osteogenic differentiation on it. The source of polyphenols was a natural extract from red grape pomace. A chemical etching was used to form an oxide layer with a nanoscale texture on Ti; this layer is hydrophilic, but without hydroxyl groups with high acidic–basic chemical reactivity. The samples were characterized by electron and fluorescence microscopies, UV–Vis spectroscopy, contact angle measurements, zeta potential titration curves, and Folin–Ciocâlteu test. The presence of an adsorbed layer of polyphenols on the functionalized surface, maintaining redox ability, was confirmed by several tests. Consistent with the surface features, the adsorption was maximized by dissolving the extract in a high–amino acid medium, with respect to an inorganic solution, exploiting the high affinity of amino acids for polyphenols and for porous titanium surfaces. The osteogenic differentiation was assessed on an osteoblastic cell line by immunofluorescence, cell viability, expression of key osteoblast markers, and extracellular matrix mineralization. The surfaces functionalized with the extract diluted in the range 1 × 10−5–1 mg/mL resulted in having a greater osteogenic activity for the highest concentration, with lower values of cell viability; higher expression of alkaline phosphatase, bone sialoprotein, and collagen; and lower levels of osteopontin. In conclusion, the functionalization of a nano-textured Ti surface with polyphenols can potentially favor the osteogenic activity of osseointegrated implants.