Adverse side-effects occurred in slurry foaming and thickening process when carbide slag was substituted for quicklime in HCS-AAC. Cement accelerators were introduced to modify the slurry foaming and coagulating process during pre-curing. Meanwhile, the affiliated effects on the physical-mechanical properties and hydration products were discussed to evaluate the applicability and influence of the cement accelerator. The hydration products were characterized by mineralogical (XRD) and thermal analysis (DSC-TG). The results indicated that substituting carbide slag for quicklime retarded slurry foaming and curing progress; meanwhile, the induced mechanical property declination had a negative effect on the generation of C–S–H (I) and tobermorite. Na₂SO₄ and Na₂O·2.0SiO₂ can effectively accelerate the slurry foaming rate, but the promoting effect on slurry thickening was inconspicuous. The compressive strength of HCS-AAC obviously declined with increasing cement coagulant content, which was mainly ascribed to the decrease in bulk density caused by the accelerating effect on the slurry foaming process. Dosing Na₂SO₄ under 0.4% has little effect on the generation of strength contributing to hydration products while the addition of Na₂O·2.0SiO₂ can accelerate the generation and crystallization of C–S–H, which contributed to the high activity gelatinous SiO₂ generated from the reaction between Na₂O·2.0SiO₂ and Ca(OH)₂.

The utilization of solid waste as building materials (USB) represents a three-win solution that simultaneously deals with the security of solid waste, environmental pollution, and scarcity of raw building materials. This study adopts a mixed content analysis, reviewing 258 USB policies (USBPs) issued between 1973 and 2022. A three-dimensional analytical framework that combines static and dynamic analyses was constructed including policy instruments, policy content, policy objectives, and time. The findings revealed both achievements and key barriers to USBPs. Over the past 50 years, cooperation among Chinese government departments and policy coordination has been increasing, and the revision of policy content and policy instruments has become more diversified and detailed. However, barriers such as an imperfect policy system and content, an irrational combination of policy instruments, and low implementation and sustainability of policies remain. In response, major recommendations for optimizing the existing USBPs in China were proposed in this paper, including improving the USB policy system and content, and optimizing the combination of policy instruments. Moreover, these findings can serve as a significant reference for policymakers, practitioners, and researchers to direct future practices of the building material industry in effectively contributing to solid waste management and sustainable development.

Utilization of solid waste as building material (USB) is a promising strategy that effectively addresses the challenges of safety and environmental pollution posed by solid waste and alleviates the scarcity of natural resources to facilitate the sustainable production of building materials. However, USB implementation and promotion have not yet matured in China because of various barriers. Therefore, this study employed the GT-DEMATEL-ISM-MACMIC model to identify the critical factors in USB implementation and examine the interactions and relationships among barriers to propose targeted recommendations. The results identified 33 barriers and revealed a distinct causal hierarchy. It was found that the macro-level barriers at the apex of the hierarchy, ‘incomplete policies and legislation’, ‘poor supervision and regulation of solid waste’, and ‘insufficient financial subsidies and incentives’, are critical barriers to USB implementation. A key outcome of this study is the identification of the most critical and obstinate barrier path evolution in USB implementation, where incomplete policies and regulations (P1, P2) lead to underdeveloped markets and capital (M6, E2), as well as low stakeholder motivation (S4), which in turn, exacerbates policy inertia and traps USB development in a state of deadlock. Conversely, detail-level barriers at the technical and managerial levels, such as ‘limited innovation in management models’ and ‘single type and limited application of renewable building material’, tend to be less influential than other barriers. Therefore, USB promotion can be achieved by strengthening policies and legislation, improving policy systems, and increasing financial subsidies. The results of this study will assist China and other developing countries in identifying critical barriers to USB implementation, offer practical approaches for promoting USB implementation, and provide methodological guidance for similar studies.

Shape memory alloy dampers (SMADs) are widely applied in structural vibration control due to their excellent superelastic properties. However, there has been no research on the random wind-induced vibration control of transmission tower-line (TTL) systems with added SMADs. To address this gap, this paper proposes an analytical framework for the wind-induced vibration control of TTL systems with SMADs under random wind loads. An analytical model for the coupled TTL system is developed. The constitutive relationship of the SMAD is derived using the statistical linearization method, and a vibration control approach for the TTL-coupled system with SMADs is proposed. The vibration response of the TTL–SMAD system under random wind loads is derived, and an extreme response analysis framework based on the first exceedance failure criterion is established. The results show that the optimal installation scheme for the SMAD achieves a vibration reduction of more than 30%. When the damper’s stiffness coefficient is approximately 1, the SMAD effectively controls the vibrations. Moreover, a service temperature of 0 °C is found to be the optimal control temperature for the SMAD. These findings provide important references for the application of SMADs in the vibration control of TTL systems.