In order to describe the changes of soil temperature field, air flow field and remediation situation with time during the process of thermally enhanced SVE (soil vapor extraction), a remediation experiment of benzene contaminated soil with single extraction pipe was carried out in a box device. The results showed that the whole temperature of the system was raised to 80 °C in 4 h. 43% of benzene were removed in the first 2% of the extraction time. After 24 h, the repair efficiency was close to 100%. The device can efficiently remove benzene from soil. By continuously monitoring the parameters in the operation process of the system, the spatial distribution of temperature and soil gas pollutant concentration with time was plotted. It showed the benzene concentration distribution in the soil gas was more consistent with the temperature distribution before the start of ventilation, and the concentration of benzene in the soil gas dropped rapidly after ventilation, while the temperature distribution was almost unaffected. In the treatment of soil with a benzene content of 17.8 mg∙kg⁻¹, when the soil gas benzene concentration is the highest at 180 min, the peak value is 11,200 mg∙m⁻³, and the average concentration is 7629.4 mg∙m⁻³.

As the world develops technologically and economically, the issue of environmental pollution has garnered increasing attention. Cellulose, the most abundant natural polymer on Earth, offers a promising solution. Cellulose-based aerogels are cost-effective, environmentally friendly, and effective at absorbing oil and organic pollutants. However, their absorption capacity is still limited. It requires the new method to modify the structure of cellulose aerogel and address this problem. In this work, by chelating silver ions with melamine and cellulose nanofibers through freeze-drying, the melamine–cellulose nanocomposite (Ag⁺-MNC) aerogels are prepared, which are tested for their ability to absorb various oils and organic solvents. The effects of nanocellulose and Ag⁺ concentrations on the absorption performance of nanocomposite aerogel are evaluated. The results show that the Ag⁺-MNC aerogels possess the very high absorption capacities with the values of 157.58 ± 3.38, 199.47 ± 5.65, 120.96 ± 7.04, 239.40 ± 7.41, 142.83 ± 5.30, 103.30 ± 4.73, 124.03 ± 4.05, and 118.95 ± 6.53 g/g for acetone, ethyl acetate, cyclohexane, dichloromethane, ethanol, kerosene, pump oil, and waste pump oil, respectively, which are 419%, 584%, 248%, 175%, 505%, 180%, 293%, and 268% higher than pure nanocellulose aerogels. Our Ag⁺-MNC aerogel has potential application in the absorption of oils and organic solvents.