Fluorescence spectroscopy is an optical spectroscopic method that has been applied for the assessment of environmental quality extensively during the last 20 years. Most of the earlier works have used conventional light sources in spectrofluorometers to assess quality. Many recent works have used laser sources of light for the same purpose. The improvement of the energy sources and of the higher resolution spectrometers has led to a tremendous increase in applications. The motivation for the present review study is the increasing use of laser sources in environmental applications. The review is divided in two parts. The fundamental principles of fluorescence spectroscopy are described in the first part. The environmental applications are described in the second part.

Laser WakeField Acceleration (LWFA) is extensively used as a high-energy electron source, with electrons achieving energies up to the GeV level. The produced electron beam characteristics depend strongly on the gas density profile. When the gaseous target is a gas jet, the gas density profile is affected by parameters, such as the nozzle geometry, the gas used, and the backing pressure applied to the gas valve. An electron source based on the LWFA mechanism has recently been developed at the Institute of Plasma Physics and Lasers. To improve controllability over the electron source, we developed a set of 3D-printed nozzles suitable for creating different gas density profiles according to the experimental necessities. Here, we present a study of the design, manufacturing, evaluation, and performance of a 3D-printed nozzle intended for LWFA experiments.

A relativistic electron source based on high power laser interaction with gas jet targets has been developed at the Institute of Plasma Physics and Lasers of the Hellenic Mediterranean University. Initial measurements were conducted using the ‘Zeus’ 45 TW laser with peak intensities in the range of 10¹⁸–10¹⁹ W cm⁻² interacting with a He pulsed gas jet having a 0.8 mm diameter nozzle. A significant improvement of the electron signal was measured after using an absorber to improve the laser pulse contrast from 10⁻¹⁰ to 10⁻¹¹. A high stability quasi-mono-energetic electron beam of about 50 MeV was achieved and measured using a magnetic spectrometer for pulsed gas jet backing pressure of 12 bar. Supplementary studies using a 3 mm diameter nozzle for backing pressures in the range of 35–40 bar showed electron beam production with energies spread in the range from 50 to 150 MeV. The pulsed jet density profile was determined using interferometric techniques. Particle-in-cell simulations, at the above experimentally determined conditions, support our experimental findings.

This research work emphasizes the capability of delivering optically shaped targets through the interaction of nanosecond laser pulses with high-density gas-jet profiles, and explores proton acceleration in the near-critical density regime via magnetic vortex acceleration (MVA). Multiple blast waves (BWs) are generated by laser pulses that compress the gas-jet into near-critical steep gradient slabs of a few micrometres thickness. Geometrical alternatives for delivering the laser pulses into the gas target are explored to efficiently control the characteristics of the density profile. The shock front collisions of the generated BWs are computationally studied by 3D magnetohydrodynamic simulations. The efficiency of the proposed target shaping method for MVA is demonstrated for TW-class lasers by a particle-in-cell simulation.

The computational study of x-pinch plasmas driven by pulsed power generators demands the development of advanced numerical models and simulation schemes, able to enlighten the experiments. The capabilities of PLUTO code are here extended to enable the investigation of low current produced x-pinch plasmas. The numerical modules of the code used and modified are presented and discussed. The simulations results are compared to experiments, carried out on a table-top pulsed power plasma generator implemented in a mode of producing a peak current of ∼45 kA with a rise time (10%–90%) of 50 ns, loaded with Tungsten wires. The structural evolution of plasma density is studied and its influence on the magnetic field is analyzed with the help of the new simulation data. The simulated areal mass density is compared with the experimentally measured dense opaque region to enlighten the dense plasma evolution. In addition, the measured areal electron density is compared to the simulation results. Moreover, the new simulation data offer valuable insights to the main jet formation mechanisms, which are further analyzed and discussed in relation to the influence of the J × B force and the momentum.