Oh-Kyong Kwon

Prof. Oh-Kyong Kwon


Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 April 2017 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
WSWoo-Sul Shin
Woo-Sul Shin
HAHyun-A Ahn
Hyun-A Ahn
JNJun-Seok Na
Jun-Seok Na
SHSeong-Kwan Hong
Seong-Kwan Hong
OKOh-Kyong Kwon
Oh-Kyong Kwon
JLJeong-Soo Lee
Jeong-Soo Lee
A driving method of pixel circuit using amorphous indium gallium zinc oxide (a-IGZO) thin-film transistor (TFT) is proposed to improve the image quality of active matrix light-emitting diode displays. The proposed pixel circuit employs a diode-connected structure to compensate for variation in threshold voltage ( $V_{\sf {th}}$ ) of the a-IGZO TFT. In addition, the proposed driving method adopts negative bias annealing to suppress the $V_{\sf {th}}$ shift. The annealing time is optimized based on the experimental observation of the minimum $V_{\sf {th}}$ shift. After a stress time of 30000 s, the measurement results show that the $V_{\sf {th}}$ shift is reduced by 29.6%, using an optimized annealing time of 5% of one frame time. In addition, the maximum deviation in the emission current using the proposed driving method was measured to be less than 4.32% after a stress time of 30000 s.

8 January 2018 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
HAHyun-A Ahn
Hyun-A Ahn
SHSeong-Kwan Hong
Seong-Kwan Hong
OKOh-Kyong Kwon
Oh-Kyong Kwon
This brief proposes an active matrix micro-pixelated light-emitting diode (AMLED) display driver to achieve a high luminance uniformity. The proposed AMLED display driver enhances the forward current uniformity of micro-LEDs by compensating for resistance mismatch between the micro-pixel circuits. The proposed AMLED display driver ICs were fabricated using a standard 0.18 μm CMOS process with 6 V high voltage devices. They were assembled with a micro-LED array having a resolution of 16×16×RGB and measured to verify the luminance uniformity of the AMLED display. The measured average deviation of the micro-LED forward current over all 768 pixels was 0.91% with an average current of 12.03 μA, indicating that the proposed display driver achieved highly uniform luminance. Therefore, the proposed AMLED display driver is suitable for high-end display applications, offering high image quality.

26 April 2018 in IEEE Sensors Journal
Verified
Journal Article
Closed access
OKOh-Kyong Kwon
Oh-Kyong Kwon
JAJae-Sung An
Jae-Sung An
SHSeong-Kwan Hong
Seong-Kwan Hong
This paper presents the latest progress in development and applications of the capacitive touch systems (CTSs) with styli. The CTSs, which include the touch sensor, analog front-end (AFE) integrated circuit (IC), and micro-controller unit, are reviewed along with the passive and active styli. The architecture of the CTS is explained first, followed by an exploration of the touch sensors: (1) types of touch sensors such as in-cell, on-cell, and add-on types according to the size and material, (2) AFE IC with the driving and sensing methods, and (3) passive and active styli for the CTS. Finally, the future perspectives of the CTS are given from the viewpoint of the technical developments.

21 August 2020 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
NKNack-Hyeon Keum
Nack-Hyeon Keum
SHSeongKwan Hong
SeongKwan Hong
OKOh-Kyong Kwon
Oh-Kyong Kwon
This article proposes an active-matrix organic light-emitting diode (AMOLED) pixel circuit for mobile displays with high resolution to improve the image quality of the display panel. The proposed pixel circuit, which consists of six low-temperature polycrystalline silicon thin-film transistors (TFTs) and two capacitors, compensates for variations in the threshold voltage (Vth) and subthreshold slope (SS) of driving TFTs at low gray levels. Such compensations are achieved by extending the compensation time in the diode-connection scheme, resulting in a reduction in the OLED current error (OCE) of the proposed pixel circuit. In addition, the proposed pixel circuit connects two capacitors in parallel to the gate node of the driving TFT, thus increasing the total storage capacitance value in a given capacitor area in the emission phase, resulting in a reduction in voltage distortion at the gate node. Moreover, the OCEs caused by the IR drop of ELVDD and the crosstalk due to parasitic capacitances are thoroughly investigated and analyzed. The measurement results of the proposed pixel circuit show that the OCEs at the 64th and 128th gray levels are reduced from ±3.5 and ±6.5 to ±2.0 and ±0.8 LSB, respectively, by extending the compensation time from 6.5 to 195 μs. Therefore, the proposed pixel circuit is highly suitable for mobile AMOLED displays requiring high image quality.

16 August 2019 in IEEE Journal of the Electron Devices Society
Verified
Journal Article
Open access
JNJun-Seok Na
Jun-Seok Na
SHSeongKwan Hong
SeongKwan Hong
OKOh-Kyong Kwon
Oh-Kyong Kwon
This paper proposes a pixel circuit with high resolution and high luminance uniformity for organic light emitting diode-on-silicon (OLEDoS) microdisplays. The proposed pixel circuit employs a simple structure that consists of four n-channel MOSFETs and one capacitor, resulting in high resolution. In addition, this circuit compensates for the threshold voltage (Vth) variation of the driving transistor caused by the body effect, which increases the Vth as the source-to-body voltage of the driving transistor increases, thus reducing the emission current deviation, resulting in a high luminance uniformity. Moreover, the proposed pixel circuit extends the data voltage range using the capacitive coupling of the storage capacitance and the parasitic capacitance at the gate node of the driving transistor to precisely control the emission current. To verify the performance of the proposed pixel circuit, a test pattern with an array of the proposed 4T1C pixel circuits was fabricated on a single-crystalline silicon wafer as a backplane using a 110 nm standard CMOS process with 5.5 V high-voltage devices. The proposed pixel circuit occupies a unit sub-pixel area of 5.76 μm × 1.92 μm, which corresponds to a resolution of 4410 pixels per inch. The measurement results show that the emission current deviation error of the proposed pixel circuit ranges between –1.16% and +1.14%, which is improved from between –45.97% to +45.42% achieved in the conventional current-source type 2T1C pixel circuit, which does not compensate for the Vth variation of the driving transistor. Moreover, the measured data voltage range of the proposed pixel circuit is extended to 1.618 V, which is 8.17 times wider than that of the conventional pixel circuit. Therefore, the proposed pixel circuit is very suitable for high resolution and high luminance uniformity of OLEDoS microdisplays.

30 October 2017 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
JAJae-Sung An
Jae-Sung An
SHSang-Hyun Han
Sang-Hyun Han
JKJu Eon Kim
Ju Eon Kim
DYDong-Hyun Yoon
Dong-Hyun Yoon
YKYoung-Hwan Kim
Young-Hwan Kim
OKOh-Kyong Kwon
Oh-Kyong Kwon
This paper proposes an analog front-end (AFE) IC using a multiple-frequency driving method (MFDM). The proposed AFE IC achieves a high signal-to-noise ratio (SNR) by using an external noise spectrum and locating the frequencies of the excitation signals in low-noise regions. In addition, it employs the MFDM to increase the frame rate by simultaneously sending excitation signals having multiple frequencies to the touch screen panel (TSP). The proposed AFE IC extracts the coordinates of the finger as well as the coordinates, pressure, and tilt angle of the active stylus with the force gauge and gyro sensor. The proposed AFE IC and active stylus were fabricated in a 0.13-μm standard CMOS process. The measurement results show that the proposed AFE IC achieves a frame rate of 3.9 kHz, and SNRs of 61.0 and 50.1 dB when a finger and active stylus are used, respectively. In addition, the pressure and tilt angle of the active stylus are expressed with 6-bit resolution. A capacitive touch system with the proposed AFE IC is demonstrated with a 65-in 104 × 64 TSP using ten fingers and the active stylus with the pressure and tilt angle.