The occlusion of buildings in urban environments leads to the intermittent reception of satellite signals, which limits the utilization of observations. This subsequently results in a decline of the positioning and attitude accuracy of Global Navigation Satellite System (GNSS)/Inertial Navigation System (INS) integrated system (GNSS/INS). This study implements a smooth post-processing strategy based on a tightly coupled differential GNSS/INS. Specifically, this strategy used the INS-estimated position to reinitialize integer ambiguity. The GNSS raw observations were input into the Kalman filter to update the measurement. The Rauch–Tung–Striebel smoothing (RTSS) algorithm was used to process the observations of the entire period. This study analyzed the performance of loosely coupled and tightly coupled systems in an urban environment and the improvement of the RTSS algorithm on the navigation solution from the perspective of fully mining the observations. The experimental results of the simulation data and real data show that, compared with the traditional tightly coupled processing strategy which does not use INS-aided integer ambiguity resolution and RTSS algorithm, the strategy in this study sufficiently utilized INS observations and GNSS observations to effectively improve the accuracy of positioning and attitude and ensure the continuity of navigation results in an obstructed environment.
Solutions equipped with two or more light detection and ranging (LiDAR) systems have been applied in several fields (navigation, mapping, target detection, and others) to obtain increasingly detailed 3D environmental information. Accurate calibration of multiple LiDAR systems is necessary for integrating and using their data. This study improves a convenient and reliable method for calibrating the relative poses between 3D LiDARs. The planar surfaces of a scene are measured from different poses; then, the planes are extracted and constraints are constructed to solve extrinsic parameters. The factors influencing calibration uncertainty are also investigated. It is found that the uncertainty is closely related to the geometric structure of the plane observations, and the rotation dilution of precision and translation dilution of precision are defined to denote this effect. The influence of different types of spatial plane geometries on calibration errors is discussed, and optimal observation conditions are derived. Experimental results for simulation and real data show that the proposed method can achieve an accurate extrinsic calibration of LiDARs, and the point cloud registration errors after calibration are less than 2 cm. The analysis of the calibration uncertainty provides a valuable reference and guide for experimental design and error evaluation.