Monai Krairiksh

Prof. Dr. Monai Krairiksh


Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 February 2023 in IEEE Access
Verified
Journal Article
Open access
NSNathapat Supreeyatitikul
Nathapat Supreeyatitikul
Pisit JanpangngernPisit Janpangngern
Pisit Janpangngern
TLTitipong Lertwiriyaprapa
Titipong Lertwiriyaprapa
MKMonai Krairiksh
Monai Krairiksh
CPChuwong Phongcharoenpanich
Chuwong Phongcharoenpanich
This research proposes a quadruple-cluster leaf-shaped metasurface (MTS)-based circularly-polarized (CP) stacked-patch antenna array with hybrid coupler feed network for sub-6 GHz 5G applications. In the study, the leaf-shaped MTS-based CP stacked-patch antenna is characterized by characteristic mode analysis (CMA). In the antenna design, one cluster of the quadruple-cluster leaf-shaped MTS-based antenna array consists of 4 × 4 leaf-shaped MTS elements; and the hybrid coupler feed network is used to enhance impedance bandwidth (IBW), axial ratio bandwidth (ARBW), and antenna gain. Simulations are carried out and an antenna prototype is fabricated and experiments undertaken. The measured IBW, ARBW, and maximum gain at the center frequency (4 GHz) are 62.5% (3.4 – 5.9 GHz), 21% (3.8 – 4.54 GHz), and 9.04 dBic at 3.9 GHz. The novelty of this research lies in the use of: (i) the CMA concept to design and develop the leaf-shaped wideband MTS-based stacked-patch antenna with CP radiation pattern; and (ii) a low-complexity hybrid coupler feed network to enhance the IBW, ARBW and gain.

1 January 2009 in Progress In Electromagnetics Research
Verified
Journal Article
Open access
PDF file
MKMonai Krairiksh
Monai Krairiksh
PKPanisa Keowsawat
Panisa Keowsawat
CPChuwong Phongcharoenpanich
Chuwong Phongcharoenpanich
SKSompol Kosulvit
Sompol Kosulvit
This paper presents the analysis and design of a two-probe excited circular ring antenna. The analysis is conducted by using induced emf method and transmission line model. The design process is to choose a suitable radius of the ring for a single probe antenna. Then, the suitable probe length and ring length are determined for the twoprobe antenna. Finally, isolation between the two probes is enhanced by insertion of an inductor coil between the probes. The operational characteristics of the prototype antenna at the frequency of 5.2 GHz are measured and compared with calculation results. It is evident that these results are in good agreement. The antenna achieved isolation in excess of 20 dB and VSWR less than 2 : 1 over the desired bandwidth and a bidirectional radiation pattern with 4 dBi gain. This antenna is suitable for Multiple-Input Multiple-Output (MIMO) system covering a long and narrow environment.

13 September 2023 in IEEE Open Journal of Antennas and Propagation
Verified
Journal Article
Open access
NSNathapat Supreeyatitikul
Nathapat Supreeyatitikul
TLTitipong Lertwiriyaprapa
Titipong Lertwiriyaprapa
NCNonchanutt CHUDPOOTI
Nonchanutt CHUDPOOTI
MKMonai Krairiksh
Monai Krairiksh
CPChuwong Phongcharoenpanich
Chuwong Phongcharoenpanich
In this research, a multi-shaped metasurface broadband circularly polarized (CP) patch antenna with parasitic elements is proposed for 5G new radio (NR) applications. The proposed metasurface CP patch antenna comprises triple-layered substrates without air gap. The upper layer sits with multi-shaped metasurface elements and parasitic patches. The middle layer consists of an L-shaped slot functioning as the ground plane, and the lower layer contains a microstrip and a fan-shaped stub functioning as the feed line. The proposed metasurface CP patch antenna with parasitic elements is evaluated using characteristic mode analysis (CMA). The CMA results indicate that the modal significance of Modes 1 and 2 of the multi-shaped metasurface CP antenna are orthogonal, giving rise to circular polarization. The non-CP radiation of Modes 3 and 4 are suppressed by using the multi-shaped metasurface elements and parasitic patches. The measured impedance bandwidth and axial ratio bandwidth are 42.85% (3.4 -4.9 GHz) and 38% (3.27 -4.6 GHz), achieving the maximum gain of 7.23 dBic at 3.7 GHz. The experiments demonstrate that the multi-shaped metasurface CP patch antenna with parasitic elements is suitable for 5G NR wireless applications. The novelty of this study is attributed to its utilization of multi-shaped metasurface elements and parasitic patches, which effectively suppress non-circularly polarized radiation modes.

15 December 2022 in IEEE Access
Verified
Journal Article
Open access
NSNathapat Supreeyatitikul
Nathapat Supreeyatitikul
TLTitipong Lertwiriyaprapa
Titipong Lertwiriyaprapa
MKMonai Krairiksh
Monai Krairiksh
CPChuwong Phongcharoenpanich
Chuwong Phongcharoenpanich
This research proposes a low-complexity and low-profile four-element circularly polarized (CP) octagonal-ring slot antenna array with sequentially-rotated feed network for S-band satellite applications. The proposed antenna array is characterized by characteristic mode analysis (CMA). One single element of the CP octagonal-ring slot antenna array consists of a C-shaped monopole on the upper layer functioning as the radiating patch; and an octagonal-ring slot patch on the lower layer functioning as the ground plane. The four elements are connected by a sequentially-rotated feed network to enhance the impedance bandwidth (IBW), axial ratio bandwidth (ARBW), and gain. Simulations are performed, and an antenna prototype is fabricated and experiments carried out. The measured IBW and ARBW at the center frequency of 2.4 GHz are 91.6% (1.8 – 4 GHz) and 84.5% (1.97 – 4 GHz), with the maximum gain of 7.8 dBic at 3.3 GHz, rendering the proposed four-element CP octagonal-ring slot antenna array with sequentially-rotated feed network operationally suitable for S-band satellite communication. The novelty of this research lies in the use of CMA to characterize the circular polarization of the octagonal-ring slot antenna array; and the sequentially-rotated feed network to enhance the IBW, ARBW, and antenna gain of the four-element CP octagonal-ring slot antenna array with sequentially-rotated feed network.

17 March 2022 in IEEE Access
Verified
Journal Article
Open access
Pisit JanpangngernPisit Janpangngern
Pisit Janpangngern
DTDanai Torrungrueng
Danai Torrungrueng
MKMonai Krairiksh
Monai Krairiksh
CPChuwong Phongcharoenpanich
Chuwong Phongcharoenpanich
This research proposes a novel dual-band (2.45/5.80 GHz) omnidirectional circularly polarized (CP) biconical antenna with double-circular parasitic parallelepiped elements for wireless local area network (WLAN) applications. The proposed dual-band CP antenna scheme consisted of a biconical radiating structure surrounded by inner- and outer-circular parallelepiped elements that convert linearly polarized electric fields into CP fields. Simulations were performed to optimize the antenna parameters, and an antenna prototype was fabricated and experiments were conducted. The measured impedance bandwidths (IBWs) were 44.4% (1.84 – 2.89 GHz) and 4.56% (5.73 – 5.99 GHz) for the lower- (2.4 GHz) and upper-frequency (5.80 GHz) bands, respectively. The corresponding 3-dB axial ratio bandwidths (ARBWs) were 11.22% (2.27 – 2.54 GHz) and 10.49% (5.6 – 6.2 GHz). The radiation patterns of the dual-band antenna scheme were omnidirectional left-hand circular polarization, with the measured antenna gains of 3.2 dBic and 8.5 dBic at 2.45 and 5.80 GHz, respectively. The simulated and measured results were reasonably agreeable. Despite the narrow IBW and ARBW for the upper-frequency band, the bandwidths adequately covered the target upper frequency band, rendering the proposed CP omnidirectional biconical antenna scheme operationally suitable for WLAN applications. Furthermore, the novelty of this research lies in the use of a biconical radiating structure augmented with double-circular parasitic parallelepiped elements to realize circular polarization for dual-band WLAN applications.

6 April 2020 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
CKChainarong Kittiyanpunya
Chainarong Kittiyanpunya
CPChuwong Phongcharoenpanich
Chuwong Phongcharoenpanich
MKMonai Krairiksh
Monai Krairiksh