Danai Torrungrueng

Prof. Dr. Danai Torrungrueng

orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2021 in Materials Research Express
Verified
Journal Article
Open access
NCNonchanutt CHUDPOOTI
Nonchanutt CHUDPOOTI
NDNattapong Duangrit
Nattapong Duangrit
ABAndrew D. Burnett
Andrew D. Burnett
JFJoshua R Freeman
Joshua R Freeman
TGThomas B Gill
Thomas B Gill
NSNutapong Somjit
Nutapong Somjit
This paper presents a comprehensive study of the optical and electrical dielectric material properties of six commonly-used silicon and glass substrates at terahertz (THz) frequencies, including refractive index, absorption coefficient, dielectric constant and loss factor. The material characterization techniques used in this paper feature THz time-domain transmission and reflection spectroscopy with the measurement frequencies from 0.5 THz up to a maximum of 6.5 THz. Of the six selected dielectric and semiconductor substrates, two are silicon wafers with resistivities ranging from 0.001 to 0.02 Ω-cm. From the measurement results, loss tangents of the selected silicon wafers range from 0.680 to 5.455 and the dielectric constants are from 1.079 to 17.735. The four other wafers are all glass-based substrates: D263 glass, Borofloat 33 glass, fused silica and Sapphire. From the measurements, it is found that the THz dielectric properties vary considerably between the substrate samples e.g. dielectric constants range from 1.925 to 3.207 while loss tangents are from 0.042 × 10−3 to 0.127. Most of the selected silicon and glass-based substrates are quite useful for many THz applications, e.g., THz integrated circuits (THz ICs), THz microsystem technologies (THz MSTs) and THz system-on-a-chip (THz SoC) and system-on-substrate (SiP).

27 April 2021 in IEEE Access
Verified
Journal Article
Open access
NSNathapat Supreeyatitikul
Nathapat Supreeyatitikul
DTDanai Torrungrueng
Danai Torrungrueng
CPChuwong Phongcharoenpanich
Chuwong Phongcharoenpanich
This research proposes a compact quadri-cluster broadband circularly polarized (CP) sequentially-rotated metasurface-based (MTS) antenna array for the C-band frequency spectrum. One cluster of the quadri-cluster MTS-based antenna array consisted of 4 × 4 S-shaped periodically-arranged MTS elements. The sequentially-rotated feed network was utilized to realize circular polarization and improve the impedance bandwidth (IBW), 3-dB axial ratio bandwidth (ARBW) and 3-dB boresight gain bandwidth of the quadri-cluster MTS-based antenna array. Simulations were performed and results were compared with experiments. The measured IBW and ARBW were 84.74% (4.0-9.0 GHz) and 57.6% (4.2-7.6 GHz) at the center frequency of 5.9 GHz, rendering the proposed quadri-cluster MTS-based antenna array suitable for satellite communication applications. In addition, the quadri-cluster MTS-based antenna array achieved the measured 3-dB boresight gain bandwidth of 81.3% (3.9-8.7 GHz), the maximum gain of 10.04 dBic at 5.6 GHz, and low radar cross-section. Specifically, the novelty of this research lies in the use of the sequentially-rotated feed network with the S-shaped MTS elements to effectively enhance ARBW of the quadri-cluster MTS-based antenna array for the C-band frequency spectrum.

9 December 2020 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
KPKittisak Phaebua
Kittisak Phaebua
NCNonchanutt CHUDPOOTI
Nonchanutt CHUDPOOTI
SKSangwon Kittiwittayapong
Sangwon Kittiwittayapong
TLTitipong Lertwiriyaprapa
Titipong Lertwiriyaprapa
DTDanai Torrungrueng
Danai Torrungrueng
HCHsi-Tseng Chou
Hsi-Tseng Chou
Size reduction of a one-sixteenth spherically sectoral homogeneous dielectric lens antenna is developed in this paper by integrating a planar partially reflective surface (PRS) to produce high gain radiation. Such a PRS, optimized by a full-wave simulator and the geometrical optics (GO) ray tracing method, has replaced the external longitude portions of ground planes in the original sectoral lens antenna to make an aperture size of 11×15 cm2, which reduces the radius of the spherical dielectric lens by more than 33.3% (from 6 to 4 cm). The overall antenna length is reduced by 56% (from 15 to 6.59 cm). The PRS plate with a ground plane is designed by ray tracing to reach a relatively uniform field distribution on the PRS aperture for high gain radiation. An antenna gain of 18.94 dBi has been achieved at 9 GHz from a sectoral lens fabricated by a three-dimensional (3D) printer using ABS ${(\varepsilon_{r}=2.429)}$ material. The design was well validated by both numerical simulations and measurements with good agreement.

13 December 2019 in IEEE Access
Verified
Journal Article
Open access
HCHsi-Tseng Chou
Hsi-Tseng Chou
YCYi-Sheng Chang
Yi-Sheng Chang
HHHao-Ju Huang
Hao-Ju Huang
ZYZhi-Da Yan
Zhi-Da Yan
TLTitipong Lertwiriyaprapa
Titipong Lertwiriyaprapa
DTDanai Torrungrueng
Danai Torrungrueng
In this paper, a multi-shell spherical dielectric lens antenna is synthesized to radiate multibeams with optimum shaped patterns for radio coverage at millimeter wave (mmW) frequencies. In particular, the design considers the composing characteristics of discrete multi-shell Luneburg lens antenna as an initial structure, and synthesizes its permittivity and sizes of dielectric shells to produce relatively shaped main beam patterns rather than conventional pencil-shapes. It targets to minimize inter-beam overlapping transition regions with slowly varying power density in the coverage boundary, and therefore reduce the ping-pong effect of inter-sector handovers to potentially minimize the inter-cell interferences arising from the over-large gain of pencil beam when the user equipment (UE) is at near the sector boundary far-off the beam peak. After the synthesis, the antenna is implemented at 38 GHz with both numerical simulation and measurement results shown to validate the concept. Successfully validation on the feasibility of beam synthesis in comparison to that of Luneburg lens antennas has been achieved. Discrepancy in fabrication to potentially result in slight radiation degradation is also discussed.

3 February 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
HCHsi-Tseng Chou
Hsi-Tseng Chou
TLTitipong Lertwiriyaprapa
Titipong Lertwiriyaprapa
PAPrayoot Akkaraekthalin
Prayoot Akkaraekthalin
DTDanai Torrungrueng
Danai Torrungrueng
This paper presents a dual-band composite reflector antenna by embedding an array of metallic phase alignment elements (PAEs) on a selected area of reflector. As a result, this phase-configurable reflector may radiate two relatively arbitrary beams at two widely separated frequency bands, respectively. In this concept, a conventional parabolic surface is first created for ordinary field radiation by a focal feed in the low frequency band. Afterward, a feed of high frequency band is offset from the focal point to result in defocused radiation due to the phase distortion of reflection from the parabolic reflector. Metallic PAEs are subsequently implemented on the reflector to configure their phases of reflections for distortion compensation, and thus to re-focus the radiation power along a desired direction. Here the resonance of PAEs also specify a valid high frequency range. In this paper, the methodology is first presented with radiation discrepancy evaluated to validate the design concept, which is further validated by full-wave simulations. Numerical examples are presented to demonstrate the feasibility.

17 March 2022 in IEEE Access
Verified
Journal Article
Open access
Pisit JanpangngernPisit Janpangngern
Pisit Janpangngern
DTDanai Torrungrueng
Danai Torrungrueng
MKMonai Krairiksh
Monai Krairiksh
CPChuwong Phongcharoenpanich
Chuwong Phongcharoenpanich
This research proposes a novel dual-band (2.45/5.80 GHz) omnidirectional circularly polarized (CP) biconical antenna with double-circular parasitic parallelepiped elements for wireless local area network (WLAN) applications. The proposed dual-band CP antenna scheme consisted of a biconical radiating structure surrounded by inner- and outer-circular parallelepiped elements that convert linearly polarized electric fields into CP fields. Simulations were performed to optimize the antenna parameters, and an antenna prototype was fabricated and experiments were conducted. The measured impedance bandwidths (IBWs) were 44.4% (1.84 – 2.89 GHz) and 4.56% (5.73 – 5.99 GHz) for the lower- (2.4 GHz) and upper-frequency (5.80 GHz) bands, respectively. The corresponding 3-dB axial ratio bandwidths (ARBWs) were 11.22% (2.27 – 2.54 GHz) and 10.49% (5.6 – 6.2 GHz). The radiation patterns of the dual-band antenna scheme were omnidirectional left-hand circular polarization, with the measured antenna gains of 3.2 dBic and 8.5 dBic at 2.45 and 5.80 GHz, respectively. The simulated and measured results were reasonably agreeable. Despite the narrow IBW and ARBW for the upper-frequency band, the bandwidths adequately covered the target upper frequency band, rendering the proposed CP omnidirectional biconical antenna scheme operationally suitable for WLAN applications. Furthermore, the novelty of this research lies in the use of a biconical radiating structure augmented with double-circular parasitic parallelepiped elements to realize circular polarization for dual-band WLAN applications.