The touch gesture is one of the most essential and effective means to transfer affective feelings and intents in humans’ communication. For an intelligent agent or a robot, the ability to automatically detect and recognize human touch can realize efficient and natural human–robot interaction. To this end, a novel spatiotemporal fusion feature extraction method is proposed for touch gesture classification tasks. The proposed method extracts time-frequency features from wavelet coefficients based on discrete wavelet transforms. Then, the feature array of space and frequency bands is constructed to extract the spatiotemporal fusion features. A publicly available touch gesture dataset called CoST is used to perform the touch gesture recognition. The recognition result of 14 gesture classes using a user-independent model yields an accuracy of up to 64.17%. Experimental results show that this method outperforms the state-of-the-art ones and that the spatiotemporal fusion features effectively boost the performance of touch gesture recognition.
11 June 2019 in IEEE Journal of Oceanic Engineering
Prediction of the dynamic behavior of autonomous underwater vehicles (AUVs) is the basis for developing the control system and optimizing the hydrodynamic shape of AUVs. A fast and efficient prediction method of dynamic behavior of AUVs was developed with the secondary programming of a commercial computational fluid dynamics (CFD) code of FLUENT. In the proposed CFD method, mass properties of the AUV and thrust of the propeller were coupled to the 6-degree-of-freedom (DOF) dynamic equations of AUV in the form of user defined functions. A subregional unstructured mixed meshing strategy combining static meshes and dynamic meshes was proposed to improve the computational efficiency and to realize the 6-DOF movement of AUV. The proposed CFD prediction method can predict not only the dynamic behavior of the AUV, but also its surrounding flow field. Dynamic behavior of a seafloor mapping AUV in straight running and turn running were predicted using the developed CFD strategy. Comparison between the prediction results from the CFD method and those from the sea trials proved the proposed method to be accurate and effective. Some measures were put forward to improve motion performance of the vehicle according to the prediction results.
To achieve rapid and flexible vertical profile exploration of deep-sea hybrid structures, a multi-joint autonomous underwater vehicle (MJ-AUV) with orthogonal joints was designed. This paper focuses on the 3-dimensional (3D) modeling and attitude control of the designed vehicle. Considering the situation of gravity and buoyancy imbalance, a 3D model of the MJ-AUV was established according to Newton’s second law and torque balance principle. And then the numerical simulation was carried out to verify the credibility of the model. To solve the problems that the pitch and yaw attitude of the MJ-AUV are coupled and the disturbance is unknown, a linear quadratic regulator (LQR) decoupling control method based on a linear extended state observer (LESO) was proposed. The system was decoupled into pitch and yaw subsystems, treated the internal forces and external disturbances of each subsystem as total disturbances, and estimated the total disturbances with LESO. The control law was divided into two parts. The first part was the total disturbance compensator, while the second part was the linear state feedback controller. The simulation results show that the overshoot of the controlled system in the dynamic process is nearly 0 rad, reaching the design value very smoothly. Moreover, when the controlled system is in a stable state, the control precision is within 0.005%.
17 November 2020 in IEEE Journal of Oceanic Engineering
It is generally believed that the lift–drag ratio is closely related to the hydrodynamic performance and sailing efficiency of the underwater glider. The underwater glider carries limited energy, making it particularly important to increase the sailing efficiency through selection of an appropriate lift–drag ratio. Considering this, the energy consumption per meter is introduced as the indicator of sailing efficiency and the energy consumption models under given net buoyancy and glide speed are established, respectively. Then, the optimal lift–drag ratio for sailing efficiency is obtained through these two models. The result shows that under given net buoyancy, the sailing efficiency has positive correlation with the lift–drag ratio. The optimal lift–drag ratio at this time is the maximum lift–drag ratio that can be obtained at a speed above the minimum allowable, and the glider shapes with a high ultimate lift–drag ratio, such as the flying wing layout or high aspect ratio wings, can be adopted. However, under a given speed, it is not the higher the better for the lift–drag ratio, but the optimal lift–drag ratio is a constant value only related to the shape of the glider to maximize the sailing efficiency. What's more, the glider shapes with a low ultimate lift–drag ratio, such as low aspect ratio wings, can decrease the lower limit of minimum energy consumption per meter and also can be adopted under a given speed.