Otariidae are excellent swimmers and the only ones among the marine mammals that use foreflippers for propulsion. Taking California sea lion as the bionic prototype, this article proposed and developed a biomimetic robotic sea lion foreflipper device (robotic flipper for short), which is composed of a pair of bionic flippers and a serial mechanism consisting of a wobbling coin mechanism and a RSSR spatial crank-rocker mechanism. The attitude and motion characteristics of the bionic flipper were obtained based on the kinematic analysis of the robotic flipper. Kinematic analysis and tank experiments show that the robotic flipper can effectively imitate the motion characteristics of the sea lion foreflipper. In addition, it can also obtain different flipper tip trajectories by adjusting the length of the connecting rod of the RSSR mechanism, and the generated thrust from the trajectory like sea lion foreflipper is larger than that from other flipper tip trajectories. A higher clapping frequency can generate a higher thrust, and the bionic flexible flipper has higher thrust and thrust efficiency than the rigid one. A larger pitch angle of the robotic flipper can result in a larger peak thrust but not always a larger average thrust. The present robotic flipper shows a better thrust performance at the pitch angle of 15°.
Prediction of the dynamic behavior of autonomous underwater vehicles (AUVs) is the basis for developing the control system and optimizing the hydrodynamic shape of AUVs. A fast and efficient prediction method of dynamic behavior of AUVs was developed with the secondary programming of a commercial computational fluid dynamics (CFD) code of FLUENT. In the proposed CFD method, mass properties of the AUV and thrust of the propeller were coupled to the 6-degree-of-freedom (DOF) dynamic equations of AUV in the form of user defined functions. A subregional unstructured mixed meshing strategy combining static meshes and dynamic meshes was proposed to improve the computational efficiency and to realize the 6-DOF movement of AUV. The proposed CFD prediction method can predict not only the dynamic behavior of the AUV, but also its surrounding flow field. Dynamic behavior of a seafloor mapping AUV in straight running and turn running were predicted using the developed CFD strategy. Comparison between the prediction results from the CFD method and those from the sea trials proved the proposed method to be accurate and effective. Some measures were put forward to improve motion performance of the vehicle according to the prediction results.
17 November 2020 in IEEE Journal of Oceanic Engineering
It is generally believed that the lift–drag ratio is closely related to the hydrodynamic performance and sailing efficiency of the underwater glider. The underwater glider carries limited energy, making it particularly important to increase the sailing efficiency through selection of an appropriate lift–drag ratio. Considering this, the energy consumption per meter is introduced as the indicator of sailing efficiency and the energy consumption models under given net buoyancy and glide speed are established, respectively. Then, the optimal lift–drag ratio for sailing efficiency is obtained through these two models. The result shows that under given net buoyancy, the sailing efficiency has positive correlation with the lift–drag ratio. The optimal lift–drag ratio at this time is the maximum lift–drag ratio that can be obtained at a speed above the minimum allowable, and the glider shapes with a high ultimate lift–drag ratio, such as the flying wing layout or high aspect ratio wings, can be adopted. However, under a given speed, it is not the higher the better for the lift–drag ratio, but the optimal lift–drag ratio is a constant value only related to the shape of the glider to maximize the sailing efficiency. What's more, the glider shapes with a low ultimate lift–drag ratio, such as low aspect ratio wings, can decrease the lower limit of minimum energy consumption per meter and also can be adopted under a given speed.
23 October 2023 in IEEE Journal of Oceanic Engineering
It is difficult for traditional underwater gliders (UGs) equipped with rigid hulls to compensate for the buoyancy loss caused by seawater density variation and reduce the vibration noise. Inspired by the streamlined shape and soft body of seals, this article develops a bionic UG with appropriate buoyancy compensation and vibration and noise reduction. The seal-inspired underwater glider (SIUG) contains a rigid-flexible composite hull, with the outer flexible silicone rubber shell completely covering the inner rigid hull. A vibration experiment is performed, and the results verify that the proposed hull can obviously suppress the propagation of vibration noise, especially the high-frequency ones. Further, the dynamic models of the SIUG and the traditional rigid UG are established, respectively, to compare their dynamic behaviors. The dynamic simulation results show that the net buoyancy of the SIUG remains almost unchanged in deep water, with obviously smaller fluctuations of pitch angle and velocity. A sea trial in the South China Sea also proves that the SIUG has a good capability of buoyancy compensation in maintaining its net buoyancy. Overall, the SIUG provides a two-in-one solution of buoyancy compensation as well as vibration and noise reduction.