Within the framework of Space@Sea project, an articulated modular floating structure was developed to serve as building blocks for artificial islands. The modularity was one of the key elements, intended to provide the desired flexibility of additional deck space at sea. Consequently, the layout of a modular floating concept may change, depending on its functionality and environmental condition. Employing a potential-flow-based numerical model (i.e., weakly nonlinear Green function solver AQWA), this paper studied the hydrodynamic sensitivity of such multibody structures to the number of modules, to the arrangement of these modules, and to the incident wave angle. Results showed that for most wave frequencies, their hydrodynamic characteristics were similar although the floating platforms consisted of a different number of modules. Only translational horizontal motions, i.e., surge and sway, were sensitive to the incident wave angle. The most critical phenomenon occurred at head seas, where waves traveled perpendicularly to the rotation axes of hinged joints, and the hinge forces were largest. Hydrodynamic characteristics of modules attached behind the forth module hardly changed. The highest mooring line tensions arose at low wave frequencies, and they were caused by second-order mean drift forces. First-order forces acting on the mooring lines were relatively small. Apart from the motion responses and mooring tensions, forces acting on the hinge joints governed the system’s design. The associated results contribute to design of optimal configurations of moored and articulated multibody floating islands.

Power generation using dielectric elastomer (DE) artificial muscle is attracting attention because of its light weight, low cost, and high-efficiency. Since this method is a system that produces electricity without emitting carbon dioxide nor using rare earths, it would contribute to the goal of environmental sustainability. In this paper, the background of DEs, the associated high efficiency wave energy generation (WEG) systems that we developed using DEs, as well as the latest development of its material are summarized. By covering both the challenges and achievements, this paper discusses the opportunities to build the foundation of an energy recycling society through the usage of these WEGs. To make these possibilities commercially successful, the advantages of DEs need to be integrated with traditional technologies. To achieve this, the method of using DEs alone and a system used in combination with an oscillating water column were also considered. Finally, the current status and future of DE generators (DEGs) are discussed.