Nevila Broli

Dr. Nevila Broli


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2021 in Open Chemistry
Verified
Journal Article
Open access
PDF file
NBNevila Broli
Nevila Broli
MVMajlinda Vasjari
Majlinda Vasjari
LVLoreta Vallja
Loreta Vallja
SDSonila Duka
Sonila Duka
ASAlma Shehu
Alma Shehu
SCSadik Cenolli
Sadik Cenolli
In this study, a simple voltammetric method was reported for independent determination of propranolol (PROP) and atenolol (ATN) in pharmaceutical tablets using carbon paste electrode modified with natural Ilmenite (CPE-I). The analytical performance of the modified sensor was evaluated using the square wave voltammetry and cyclic voltammetry for determination of both β(beta) blockers in 0.1 mol L−1of sulfuric acid solution (H2SO4). The signal obtained with modified carbon paste electrode in 0.1 mol L−1of H2SO4showed a good electrocatalytic activity toward the oxidations of PROP and ATN compared with the bare one. The enhanced oxidation peak current response can be attributed to the catalytic effect of the ilmenite nanomaterial incorporated into the carbon paste electrode. Under optimal condition, good linear calibration curves were obtained ranging from 0.20 to 8.9 mmol L−1for PROP and 2.0 to 9.9 µmol L−1for ATN, with detection limits of 80 and 0.31 µmol L−1, respectively. The CPE-I sensor had good repeatability and reproducibility (RSD ≤ 3.2%) and high sensitivity for the detection of both ATN and PROP. The proposed sensor was applied for detection of these drugs in pharmaceutical tablets. The obtained results indicate that the voltammetric CPE-I sensor could be an alternative method for the routine quality control of the β blockers in complex matrices.

20 November 2018 in Journal of Food Processing and Preservation
Verified
Journal Article
Closed access
PDF file
NBNevila Broli
Nevila Broli
LVLoreta Vallja
Loreta Vallja
ASAlma Shehu
Alma Shehu
MVMajlinda Vasjari
Majlinda Vasjari

19 August 2024 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
EHErgi Hoxha
Ergi Hoxha
NBNevila Broli
Nevila Broli
MVMajlinda Vasjari
Majlinda Vasjari
SCSadik Cenolli
Sadik Cenolli
Atenolol is a medication belonging to the class of drugs known as beta-blockers, used to treat high blood pressure (hypertension) and irregular heartbeats (arrhythmia). Their presence in the environment has serious impacts on humans, animals, and the water ecosystem. In this context, the aim of this study was to develop a simple voltammetric method for the determination of atenolol (ATN) using carbon paste electrodes modified with the nanomaterials TiO2 and rGO/TiO2. The analytical performance of the modified sensor was evaluated using square wave voltammetry and cyclic voltammetry in 0.1 mol L−1 acid sulfuric solution (H2SO4), pH 2. The nanocomposite electrode CPE/rGO/TiO2 exhibited excellent electrocatalytic activity towards ATN oxidations at 0.1 mol L−1 H2SO4 compared with unmodified carbon paste electrodes CPEs and those modified with titanium oxide, CPE/TiO2. Different experimental and conditional parameters were optimized, such as supporting electrolytes, pH, amplitude, frequency, etc. Under optimal conditions, linear calibration curves were obtained, ranging from 1.7 to 23.2 µmol L−1 for ATN with detection limits of 0.05 μmol L−1. The modified nanocomposite CPE/rGO/TiO2 sensor showed good sensitivity and good repeatability (RSD ≤ 0.61%) for ATN determination. The proposed sensor is mechanically robust and presented reproducible results and a long useful life. In order to verify the usefulness of the developed methods, the nanocomposite sensor CPE/rGO/TiO2 was applied for the detection of atenolol in real samples (pharmaceutical tablets without any pre-treatment). The excipients present in the tablets did not interfere in the assay. Recoveries ranging from 97.7% to 106% were obtained. The results showed that the CPE/rGO/TiO2 voltammetric sensor could be successfully applied in the routine quality control of ATN in complex matrices.

16 April 2021 in Asian Journal of Chemistry
Verified
Journal Article
Open access
NBNevila Broli
Nevila Broli
LVL. Vallja
L. Vallja
MVM. Vasjari
M. Vasjari
ASA. Shehu
A. Shehu
SDS. Duka
S. Duka
A modified glassy carbon electrode (Aufilm/GCE) using a gold film was constructed for determination of chromium(VI) in real water samples. A GCE was immersed in HAuCl4 solution (10-3 M) and the thin layer of gold was electrodeposited for 10 min at −0.4 V (vs. Ag/AgCl). Compared with only GCE, a strong affinity between chromium and gold species was observed with an increase in Cr(VI) signal. The type of supporting electrolytes, electrodeposition time, scan rate, pH, modulation time and the modulation amplitude were optimized through differential pulse-anodic stripping voltammetry (DP-ASV). A calibration graph acquired using the accumulation time of 120 s with a sensitivity of 1.3 × 10-2 μA/μgL-1 was linear in the range of 10-120 μg L-1. A low detection limit of 5.5 μg/L Cr(VI) and a strong correlation coefficient R2 = 0.9971 were obtained under the optimal experimental conditions. Signals were reproducible and exhibited a relative standard deviation of ±4.5%. A modified sensor was employed to determine the Cr(VI) content in the sewage water samples.

5 April 2026 in Journal of Electrochemical Science and Engineering
Verified
Journal Article
Open access
QIQendresa Istrefi
Qendresa Istrefi
NBNevila Broli
Nevila Broli
LVLoreta Vallja
Loreta Vallja
SDSonila Duka
Sonila Duka
SCSadik Cenolli
Sadik Cenolli
Phosphates are widely used in food as texture modifiers, preservatives and flavour enhan­cers, while excessive intake may negatively affect human health and the environment. Consequently, there is a growing demand for low-cost, portable, and reliable tools for phosphate monitoring in food and water samples. In this work, an electrochemical sensor based on a multi-walled carbon nanotube (MWCNT) modified carbon paste electrode (CPE) was developed for phosphate determination. Phosphate detection was based on the electrochemical reduction of an electroactive phosphomolybdate complex formed in acidic medium (50 mM sulfuric acid). Key analytical parameters, including solution acidity and complexation time, were optimized to enhance sensor performance. Carbon nanotube modification significantly enhanced the electrochemical response. While the bare CPE shows weak, poorly defined redox peaks due to limited electron transfer and low surface area, MWCNT-modified CPE exhibits well-defined peaks with ~6-fold higher current, reflecting improved sensitivity, faster electron transfer, and better peak separation. Using square-wave voltammetry, the sensor exhibited a linear response in the phosphate concen­tration range of 3.1 to 21.7 mg L⁻¹, with a detection limit of 0.03 mg L⁻¹ and a response time of approximately 10 s. The sensor was successfully applied to real sausage samples, yielding recoveries of 94.6 to 97.2 % with relative standard deviation values below 5 %. The presented MWCNT-CPE sensor provides a cost-effective, portable and simple device for fast and reliable in situ detection of phosphate in food and water samples.

20 January 2026 in Journal of Electrochemical Science and Engineering
Verified
Journal Article
Open access
PDF file
NBNevila Broli
Nevila Broli
SCSadik Cenolli
Sadik Cenolli
LVLoreta Vallja
Loreta Vallja
MVMajlinda Vasjari
Majlinda Vasjari
AAAna Ameda
Ana Ameda
LKLueda Kulla
Lueda Kulla
Atenolol, one of the most prescribed β₁-selective adrenergic blockers, has been increasingly detected in aquatic ecosystems due to incomplete elimination in sewage treatment plants, posing an ecotoxicological hazard to the environment. Here, an electrochemical sensor based on silver-decorated reduced graphene oxide composite carbon paste electrode (rGO@Ag-CPE) was designed for the ultrasensitive electroanalytical determination of atenolol in real-world samples. The morphology and chemical composition of rGO@Ag-CPE were investigated by trans­mission electron microscopy and energy-dispersive spectroscopy analyses, while the electro­chemical properties were evaluated by cyclic and square wave voltammetry techniques. The rGO@Ag-CPE demonstrated excellent electrocatalytic performance toward Atenolol oxidation, attributed to the unique properties of reduced graphene oxide and silver nanoparticles, which provide high conductivity and efficient electrocatalysis, thereby helping to prevent unwanted Atenolol degradation. Under optimized electrochemical sensing conditions, the rGO@Ag-CPE sensor exhibited a linear dynamic range of 20-859 μM (R² = 0.9953), a low detection limit of 2.9 μM, and good reproducibility (relative standard deviation < 4.0 %). A validation study on real-world samples showed good atenolol recovery of 88.8-102% in natural waters and 97-99.2 % in pharmaceutical tablets.